Centre for Intelligent Transport


   2024   |   2023   |   2022   |   2021   |   2020   |   2019   |   2018   |   2017   |   2016   |   2015   |   2014   
  • Chen L, Ghilardi M, Busfield JJC and Carpi F (2019). Electrically tuning soft membranes to both a higher and a lower transparency. Nature Publishing Group Scientific Reports vol. 9 (1) 
  • Fukahori Y, Gabriel P, Liang H and Busfield JJC (2019). A new generalized philosophy and theory for rubber friction and wear. Elsevier Wear, 203166-203166.  
  • Xu S, Mueller J-D, Pavanakumar M and Wang D (2019). A Newton–Krylov Solver for Robust Turbomachinery Aerodynamic Analysis. American Institute of Aeronautics and Astronautics Aiaa Journal: Devoted to Aerospace Research and Development 
  • Mao J, Zhao L, Liu X and Avital E (2019). A resolved CFDEM method for the interaction between the fluid and the discontinuous solids with large movement. Wiley International Journal For Numerical Methods in Engineering 
  • Wang M, Avital E, Bai X, Ji C, Xu D, Williams JJR and Munjiza A (2019). Fluid-structure Interaction of Flexible Submerged Vegetation Stems and Kinetic Turbine Blades. Springer (Part of Springer Nature) Computational Particle Mechanics vol. 7, 839-848.  
  • Busfield J, Hohenberger T, Pugno N and WINDSLOW R (2019). Constitutive Model for both Low and High Strain Non-Linearities in Highly Filled Elastomers and Implementation with user-defined Material Subroutines in Abaqus. American Chemical Society Rubber Chemistry and Technology vol. 92 (4), 653-686.  
  • Karabasov S, Ayton L, Wu X and Afsar M (2019). Advances in aeroacoustics research: recent developments and perspectives. Philosophical Transactions. Series a, Mathematical, Physical, and Engineering Sciences vol. 377 (2159), 20190390-20190390.  
  • Kong X, Zhou H, Zheng C, Liu H, Wu W, Guan Z and Dear JP (2019). An experimental study on the mitigation effects of fine water mist on confined-blast loading and dynamic response of steel plates. Elsevier International Journal of Impact Engineering vol. 134 
  • Liu H, Falzon BG and Dear JP (2019). An experimental and numerical study on the crush behaviour of hybrid unidirectional/woven carbon-fibre reinforced composite laminates. Elsevier International Journal of Mechanical Sciences vol. 164 
  • Zhang Y, Xu K, Zang J, Ni Z, Zhu Y and Chen L (2019). Dynamic design of a nonlinear energy sink with NiTiNOL-steel wire ropes based on nonlinear output frequency response functions. Springer Nature Applied Mathematics and Mechanics vol. 40 (12), 1791-1804.  
  • Ghilardi M, Boys H, Török P, Busfield JJC and Carpi F (2019). Smart Lenses with Electrically Tuneable Astigmatism. Nature Publishing Group Scientific Reports vol. 9 (1), 16127-16127.  
  • Mueller J, ZHANG X, Akbarzadeh S and WANG Y (2019). Geometric continuity constraints of automatically derived parametrisations in CAD-based shape optimisation. Taylor & Francis International Journal of Computational Fluid Dynamics 
  • Chotalia K, Cagney N, Lithgow-Bertelloni C and Brodholt J (2019). The coupled effects of mantle mixing and a water-dependent viscosity on the surface ocean. Elsevier Earth and Planetary Science Letters 
  • Liu J, Liu H, Kaboglu C, Kong X, Ding Y, Chai H, Blackman BRK, Kinloch AJ and Dear JP (2019). The Impact Performance of Woven-Fabric Thermoplastic and Thermoset Composites Subjected to High-Velocity Soft- and Hard-Impact Loading. Springer Nature Applied Composite Materials vol. 26 (5-6), 1389-1410.  
  • Wang X, Han C, Yang P and Sun X (2019). Onboard satellite visibility prediction using metamodeling based framework. Elsevier Aerospace Science and Technology vol. 94 
  • Avital EJ and Miloh T (2019). Light-induced heat-conducting micro/nano spheroidal particles and their thermoosmotic velocity fields. International Journal of Heat and Mass Transfer vol. 143 
  • Luo Z, Zhang YQ, Zhu YP and Li CS (2019). Design of Distortion Similar Model for Thin-Walled Conical Shell and Method for Determining Geometric Interval. Dongbei Daxue Xuebao/Journal of Northeastern University vol. 40 (11), 1600-1605.  
  • Wang Y, Li Y, Tan W, Tang M and Du W (2019). Experimental study on shear properties of concrete pile-clay interface considering surface roughness of structure. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology) vol. 50 (10), 2502-2509.  
  • Wang X, Song G, Leus R and Han C (2019). Robust Earth Observation Satellite Scheduling With Uncertainty of Cloud Coverage. Institute of Electrical and Electronics Engineers (Ieee) Ieee Transactions On Aerospace and Electronic Systems vol. 56 (3), 2450-2461.  
  • Markesteijn AP and Karabasov SA (2019). Simulations of co-axial jet flows on graphics processing units: the flow and noise analysis. The Royal Society Philosophical Transactions of The Royal Society a Mathematical Physical and Engineering Sciences vol. 377 (2159) 
  • Han C, Bai S, Zhang S, Wang X and Wang X (2019). Visibility optimization of satellite constellations using a hybrid method. Elsevier Acta Astronautica vol. 163, 250-263.  
  • Zhang S, Cagney N, Balabani S, Naveira-Cotta CP and Tiwari MK (2019). Probing vortex-shedding at high frequencies in flows past confined microfluidic cylinders using high-speed microscale particle image velocimetry. Aip Publishing Physics of Fluids vol. 31 (10) 
  • Saleh Z, Avital EJ and Korakianitis T (2019). Effect of in-service burnout on the transonic tip leakage flows over flat tip model. Sage Publications Proceedings of The Institution of Mechanical Engineers Part a Journal of Power and Energy vol. 234 (5), 655-669.  
  • Chen Y, Alanezi AA, Zhou J, Altaee A and Shaheed MH (2019). Optimization of module pressure retarded osmosis membrane for maximum energy extraction. Journal of Water Process Engineering vol. 32 
  • Tan W, Stallard JC, Smail FR, Boies AM and Fleck NA (2019). The mechanical and electrical properties of direct-spun carbon nanotube mat-epoxy composites. Carbon vol. 150, 489-504.  
  • Yan Y, Avital E, Williams J and Cui J (2019). CFD analysis for the performance of micro-vortex generator on aerofoil and vertical axis turbine. Aip Publishing Journal of Renewable and Sustainable Energy vol. 11 (4), 1-23.  
  • Munjiza A, Galić M, Smoljanović H, Marović P, Mihanović A, Živaljić N, Williams J and Avital E (2019). Aspects of the hybrid finite discrete element simulation technology in science and engineering. International Journal For Engineering Modelling vol. 32 (1), 45-55.  
  • Ge X, Luo Z, Ma Y, Liu H and Zhu Y (2019). A novel data-driven model based parameter estimation of nonlinear systems. Elsevier Journal of Sound and Vibration vol. 453, 188-200.  
  • Xia HH, Ismail A, Yao J and Stark J (2019). Scaling Laws for Transition from Varicose to Whipping Instabilities in Electrohydrodynamic Jetting. American Physical Society (Aps) Physical Review Applied vol. 12 (1) 
  • Huang T, Yuan Y, Zheng JL, Avital E and Wen PH (2019). Large deformations of tapered beam with finite integration method. Engineering Analysis With Boundary Elements vol. 107, 115-123.  
  • Cao S, Liu T, Jones A and Tizani W (2019). Particle reinforced thermoplastic foams under quasi-static compression. Elsevier Mechanics of Materials vol. 136 
  • Karthikeyan T, Avital E, Nithya V and Abdus S (2019). Optimization of a horizontal axis marine current turbine via surrogate models. Ocean Systems Engineering vol. 9 (2), 111-133.  
  • Sabnis K and Babinsky H (2019). Nozzle Geometry Effects on Corner Boundary Layers in Supersonic Wind Tunnels. American Institute of Aeronautics and Astronautics (Aiaa) Aiaa Journal vol. 57 (8), 1-4.  
  • Han C, Zhang S and Wang X (2019). On-orbit servicing of geosynchronous satellites based on low-thrust transfers considering perturbations. Elsevier Acta Astronautica vol. 159, 658-675.  
  • Li M, He B, Liang Z, Zhao C-G, Chen J, Zhuo Y, Xu G, Xie J and Althoefer K (2019). An Attention-Controlled Hand Exoskeleton for the Rehabilitation of Finger Extension and Flexion Using a Rigid-Soft Combined Mechanism. Front Neurorobot vol. 13, 34-34.  
  • Banerjee SS, Hait S, Natarajan TS, Wiessner S, Stöckelhuber KW, Jehnichen D, Janke A, Fischer D, Heinrich G, Busfield JJC and Das A (2019). Water-Responsive and Mechanically-Adaptive Natural Rubber Composites by in-Situ Modification of Mineral Filler Structures. American Chemical Society (Acs) The Journal of Physical Chemistry B 
  • Wang H, Zhang Z, Dai Z, Chen J, Zhu X, Du W and Cao X (2019). Heterogeneous pigeon-inspired optimization. Springer Verlag Science China Information Sciences vol. 62 (7) 
  • Wang S, Housden RJ, Noh Y, Singh A, Lindenroth L, Liu H, Althoefer K, Hajnal J, Singh D and Rhode K (2019). Analysis of a customized clutch joint designed for the safety management of an ultrasound robot. Applied Sciences (Switzerland) vol. 9 (9) 
  • Cagney N and Balabani S (2019). Taylor-Couette flow of shear-thinning fluids. Physics of Fluids vol. 31 (5) 
  • Paykani A, Frouzakis CE and Boulouchos K (2019). Numerical optimization of methane-based fuel blends under engine-relevant conditions using a multi-objective genetic algorithm. Elsevier Applied Energy vol. 242, 1712-1724.  
  • Yazar I, Caliskan F and Vepa R (2019). Model Predictive Control and Controller Parameter Optimisation of Combustion Instabilities. International Journal of Turbo and Jet Engines vol. 36 (2), 185-194.  
  • Yan Y, Avital E, Williams JJR and Korakianitis T (2019). CFD analysis for the performance of Gurney flap on aerofoil and vertical axis turbine. International Journal of Mechanical Engineering and Robotics Research International Journal of Mechanical Engineering and Robotics Research vol. 8 (3), 385-392.  
  • Vepa R (2019). Dynamics and Control of Autonomous Space Vehicles and Robotics. Cambridge University Press (Cup)  
  • Cagney N and Balabani S (2019). Influence of shear‐thinning rheology on the mixing dynamics in Taylor‐Couette flow. Wiley Chemical Engineering & Technology 
  • Xu D, Ji C, Munjiza A, Kaliviotis E, Avital E and Willams J (2019). Study on the packed volume-to-void ratio of idealized human red blood cells using a finite-discrete element method. Applied Mathematics and Mechanics (English Edition) vol. 40 (5), 737-750.  
  • Mohanamuraly P, Hascoët L and Müller J-D (2019). Seeding and adjoining zero-halo partitioned parallel scientific codes. Taylor & Francis Optimization Methods and Software vol. 35 (3), 618-637.  
  • Cagney N and Balabani S (2019). The role of the separation point in streamwise vortex-induced vibrations. Journal of Fluids and Structures vol. 86, 316-328.  
  • Roi DP, Mueller J-D, Lobotesis K, McCague C, Memarian S, Khan F and Mankad K (2019). Intracranial aneurysms: looking beyond size in neuroimaging: the role of anatomical factors and haemodynamics. Quantitative Imaging in Medicine and Surgery vol. 9 (4), 537-545.  
  • Liu H, Falzon BG, Li S, Tan W, Liu J, Chai H, Blackman BRK and Dear JP (2019). Compressive failure of woven fabric reinforced thermoplastic composites with an open-hole: An experimental and numerical study. Elsevier Composite Structures vol. 213, 108-117.  
  • Zhang X-J, Jia W, Guan X-M, Xu G-Q, Chen J and Zhu Y-B (2019). Optimized deployment of a radar network based on an improved firefly algorithm. Springer Nature Frontiers of Information Technology and Electronic Engineering vol. 20 (3), 425-437.  
  • Matsuno T, Wang Z, Althoefer K and Hirai S (2019). Adaptive update of reference capacitances in conductive fabric based robotic skin. Ieee Robotics and Automation Letters vol. 4 (2), 2212-2219.  
  • BUSFIELD JJC and WINDSLOW R (2019). Viscoelastic Modelling of Extrusion Damage in Elastomer Seals. Taylor & Francis Soft Materials vol. 17 (3), 228-240.  
  • Chermprayong P, ZHANG K, Xiao F and Kovac M (2019). An Integrated Delta Manipulator for Aerial Repair: A New Aerial Robotic System. Institute of Electrical and Electronics Engineers Ieee Robotics and Automation Magazine 
  • Wu F, Liu T, Xiao X, Zhang Z and Hou J (2019). Static and dynamic crushing of novel porous crochet-sintered metal and its filled composite tube. Elsevier Composite Structures vol. 209, 830-843.  
  • Hu J, Korotkin IA and Karabasov SA (2019). Hybrid multiscale simulation reveals focusing of a diffusing peptide molecule by parallel shear flow in water. Journal of Molecular Liquids vol. 280, 285-297.  
  • Zhang Y, Liu T and Xu Z (2019). Dynamic response of hybrid carbon fibre laminate beams under ballistic impact. Elsevier Composite Structures vol. 210, 409-420.  
  • Omkar K, Karthikeyan KB, Srimathi R, Venkatesan N, Avital EJ, Samad A and Rhee SH (2019). A performance analysis of tidal turbine conversion system based on control strategies. Elsevier Bv Energy Procedia vol. 160, 526-533.  
  • Shiva A, Sadati SMH, Noh Y, Fraś J, Ataka A, Würdemann H, Hauser H, Walker ID, Nanayakkara T and Althoefer K (2019). Elasticity Versus Hyperelasticity Considerations in Quasistatic Modeling of a Soft Finger-Like Robotic Appendage for Real-Time Position and Force Estimation. Mary Ann Liebert Soft Robotics vol. 6 (2), 228-249.  
  • Luo Z, Wang Y, Zhai J, Zhu Y and Wang D (2019). Prediction of vibration characteristics of blisks using similitude models. Taylor & Francis Mechanics Based Design of Structures and Machines vol. 47 (2), 121-135.  
  • Ye W, Li Q and Zhang K (2019). Kinematics and Performance Analysis of 2R2T Parallel Manipulator with Partially Decoupled Motion. Nongye Jixie Xuebao/Transactions of The Chinese Society For Agricultural Machinery vol. 50 (1), 374-382.  
  • Saponaro G, JAMONE L, Alexandre B and Giampiero S (2019). Beyond the Self: Using Grounded Affordances to Interpret and Describe Others’ Actions. Institute of Electrical and Electronics Engineers Ieee Transactions On Cognitive and Developmental Systems 
  • Rorai C, Zaitsev M and Karabasov S (2019). On the limitations of some popular numerical models of flagellated microswimmers: importance of long-range forces and flagellum waveform. R Soc Open Sci vol. 6 (1), 180745-180745.  
  • Wang S, Housden J, Noh Y, Singh A, Back J, Lindenroth L, Liu H, Hajnal J, Althoefer K, Singh D and Rhode K (2019). Design and Implementation of a Bespoke Robotic Manipulator for Extra-corporeal Ultrasound. J Vis Exp (143) 
  • BUSFIELD J (2019). Modelling of elastomeric materials and products. Plastics, Rubber and Composites vol. 48 (1), 1-2.  
  • Zhang X, Wang Z, Zhu Y, Xu J and Wen B-C (2019). Synchronization and Stability of Two Pairs of Reversed Rotating Exciters Mounted on Two Different Rigid Frames. Institute of Electrical and Electronics Engineers (Ieee) Ieee Access vol. 7, 115348-115367.  
  • Wang X, Han C, Zhang R and Gu Y (2019). Scheduling Multiple Agile Earth Observation Satellites for Oversubscribed Targets Using Complex Networks Theory. Institute of Electrical and Electronics Engineers (Ieee) Ieee Access vol. 7, 110605-110615.  
  • Li X, Ma D, Liu H, Tan W, Gong X, Zhang C and Li Y (2019). Assessment of failure criteria and damage evolution methods for composite laminates under low-velocity impact. Elsevier Composite Structures vol. 207, 727-739.