Centre for Intelligent Transport


   2023   |   2022   |   2021   |   2020   |   2019   |   2018   |   2017   |   2016   |   2015   |   2014   |   2013   
  • Morgan B, Murali AR, Preston G, Sima YA, Chamorro LM, Bourantas C, Torii R, Mathur A, Baumbach A, Jacob M, Karabasov S and Krams R (2023). A physics-based machine learning technique rapidly reconstructs the wall-shear stress and pressure fields in coronary arteries. Frontiers Media Frontiers in Cardiovascular Medicine
  • Win TT, Panwisawas C, Jongvivatsakul P, Pansuk W and Prasittisopin L (2023). Effects of Fly Ash Composition to Mitigate Conversion of Calcium Aluminate Cement Composites. Mdpi Buildings vol. 13 (10), 2453-2453.
  • Zhang G, Chen G, Panwisawas C, Teng X, Ma Y, An R, Huang Y, Cao J and Leng X (2023). First-principles study of oxygen segregation and its effect on the embrittlement of molybdenum symmetrical tilt grain boundaries. Elsevier Acta Materialia vol. 261, 119387-119387.
  • Bhuwal AS, Pang Y, Maskery I, Ashcroft I, Sun W and Liu T (2023). Creep characterisation of Inconel 718 lattice metamaterials manufactured by laser powder bed fusion. Wiley Advanced Engineering Materials
  • Windslow RJ, Duncan AM, Hohenberger TW and Busfield JJC (2023). EVALUATING THE CRACK TIP FORMATION AND PROPAGATION ENERGY OF A TROUSER TEAR SPECIMEN. Rubber Division, Acs Rubber Chemistry and Technology
  • Huang M, Tunnicliffe LB, Liao S, Yang B, Yan H and Busfield JJC (2023). BROADBAND DIELECTRIC CHARACTERIZATION OF CARBON BLACK–REINFORCED NATURAL RUBBER. Rubber Division, Acs Rubber Chemistry and Technology
  • Duncan AM, Keizo A, Ramier JL and Busfield J (2023). Improved Dual Network Model for Aging of Rubber Composites under Set Strains. American Chemical Society Macromolecules
  • Li Y, Wang F, Huang C, Ren J, Wang D, Kong J, Liu T and Long L (2023). Impact damage reduction of woven composites subject to pulse current. Nature Research Nature Communications vol. 14 (1)
  • Guoqing D, Xue M, Guo Y, Chang H, Sun Z, Lu J, Li W, Panwisawas C and Alexandrov IV (2023). Gradient microstructure and strength-ductility synergy improvement of 2319 aluminum alloys by hybrid additive manufacturing. Elsevier Journal of Alloys and Compounds vol. 968, 171781-171781.
  • Hassan MM, Harris J, Busfield JJC and Bilotti E (2023). A review of the green chemistry approaches to leather tanning in imparting sustainable leather manufacturing. Royal Society of Chemistry (Rsc) Green Chemistry
  • Zhao Y, Zhu YP, Han Q and Liu Y (2023). The evaluation of Nonlinear Output Frequency Response Functions based on tailored data-driven modelling for rotor condition monitoring. Mechanical Systems and Signal Processing vol. 197
  • Tao Y, Tashiro R, Yonezawa S, Stevens CA, Bilotti E and Busfield JJC (2023). Quasi-static bending fatigue of carbon cord-rubber composites used in timing belts. Rubber Division, Acs Rubber Chemistry and Technology
  • Kaur A, Gautrot JE, Akutagawa K, Watson D, Bickley A and Busfield JJC (2023). Thiyl radical induced cis/trans isomerism in double bond containing elastomers. Rsc Advances vol. 13 (34), 23967-23975.
  • Li W, Wang M, Li J, Su Y, Jha DK, Qian X, Althoefer K and Liu H (2023). L3F-TOUCH: A Wireless GelSight With Decoupled Tactile and Three-Axis Force Sensing. Ieee Robotics and Automation Letters vol. 8 (8), 5148-5155.
  • Gao Y, Yu C, Zhu YP and Luo Z (2023). A NARX Model-Based Condition Monitoring Method for Rotor Systems. Sensors vol. 23 (15)
  • Jalali SK, Busfield J and Pugno N (2023). Micromechanics Model for Rubber Blends Filled by a Nano-Reinforced Devulcanized Recycled Rubber: Application in the Automotive Industry. International Journal of Automotive Technology vol. 24 (4), 983-994.
  • Yip M, Salcudean S, Goldberg K, Althoefer K, Menciassi A, Opfermann JD, Krieger A, Swaminathan K, Walsh CJ, Huang HH and Lee IC (2023). Artificial intelligence meets medical robotics. Science (New York, N.Y.) vol. 381 (6654), 141-146.
  • Naderizadeh S, Santagiuliana G, Tu W, Marsh D, Bilotti E and Busfield JJC (2023). Piezoresistive Elastomer Composites Used for Pressure Sensing. Ieee Sensors Journal
  • Liu C, Busfield JJC and Zhang K (2023). An Electric Self‐Sensing and Variable‐Stiffness Artificial Muscle. Wiley Advanced Intelligent Systems
  • Yang L, Ren N, Panwisawas C, Li J, Xia M and Dong H (2023). Melt flow-induced mechanical deformation of dendrites in alloy solidification: A coupled thermal fluid - solid mechanics approach. Elsevier Journal of Materials Research and Technology vol. 25, 4094-4109.
  • Shaheed M, Rahman SMFU, Mohamed Z, Husain AR, Ramli L, Abbasi MA and Anjum W (2023). Adaptive Input Shaper for Payload Swing Control of a 5-DOF Tower Crane with Parameter Uncertainties and Obstacle Avoidance. Elsevier Automation in Construction
  • Lu Z, Ren N, Xu X, Li J, Panwisawas C, Xia M, Dong H and Tsang E (2023). Real-time prediction and adaptive adjustment of continuous casting based on deep learning. Springer Nature Communications Engineering vol. 2 (1)
  • Ragab R, Pang Y, Liu T, Neate N, Li M and Sun W (2023). Unravelling the effects of ratcheting and constraint on the cyclic behaviour of a martensitic steel under elevated temperature. Elsevier Mechanics of Materials, 104708-104708.
  • Liu T, Chen S, Yang P, Zhu Y and Harris CJ (2023). Efficient adaptive deep gradient RBF network for multi-output nonlinear and nonstationary industrial processes. Journal of Process Control vol. 126, 1-11.
  • Üstün CE, Herfatmanesh MR, Valera-Medina A and Paykani A (2023). Applying machine learning techniques to predict laminar burning velocity for ammonia/hydrogen/air mixtures. Elsevier Energy and Ai vol. 13
  • Han C, Gu Y, Wu G and Wang X (2023). Simulated Annealing-Based Heuristic for Multiple Agile Satellites Scheduling under Cloud Coverage Uncertainty. Ieee Transactions On Systems, Man, and Cybernetics: Systems vol. 53 (5), 2863-2874.
  • Liu Z, Lang ZQ, Zhu YP, Gui Y, Laalej H and Stammers J (2023). Sensor Data Modeling and Model Frequency Analysis for Detecting Cutting Tool Anomalies in Machining. Ieee Transactions On Systems, Man, and Cybernetics: Systems vol. 53 (5), 2641-2653.
  • Tang X, Li X, Avital EJ, Saleh ZJ and Motallebi F (2023). Investigation of the formation and evolution of over-tip shock waves in the pressure-driven tip leakage flow by time-resolved schlieren visualization. Physics of Fluids vol. 35 (5), 056101-056101.
  • Imam-Lawal O, Verstraete T and Müller JD (2023). Discrete adjoint for coupled conjugate heat transfer. Structural and Multidisciplinary Optimization vol. 66 (5)
  • Dai G, Sun Z, Li Y, Jain J, Bhowmik A, Shinjo J, Lu J and Panwisawas C (2023). Grain refinement and columnar-to-equiaxed transition of Ti6Al4V during additive manufacturing via different laser oscillations. Elsevier International Journal of Machine Tools and Manufacture, 104031-104031.
  • Au-Yeung K, Quintanas-Corominas A, Martínez-Pañeda E and Tan W (2023). Hygroscopic phase field fracture modelling of composite materials. Springer Engineering With Computers
  • Kong X, Zhou H, Zheng C, Zhu Z, Wu W, Guan Z, Dear JP and Liu H (2023). Dynamic response and failure behaviour of thermoplastic fibre–metal​ laminates subjected to confined blast load. Elsevier Thin-Walled Structures vol. 187, 110760-110760.
  • Naghibi SE, Karabasov SA and Kamenkovich I (2023). Zonal jets in the Southern Ocean: A semi-analytical model based on scale separation. Elsevier Ocean Modelling, 102198-102198.
  • Sereewatthanawut I, Panwisawas C, Ngamkhanong C and Prasittisopin L (2023). Effects of extended mixing processes on fresh, hardened and durable properties of cement systems incorporating fly ash. Springer Nature Scientific Reports vol. 13, 6091-6091.
  • Bhuwal AS, Pang Y, Ashcroft I, Sun W and Liu T (2023). Discovery of quasi-disordered truss metamaterials inspired by natural cellular materials. Elsevier Journal of The Mechanics and Physics of Solids, 105294-105294.
  • Vizcaíno-Vergara M, Kari L, Tunnicliffe LB and Busfield J (2023). Evolution of the Viscoelastic Properties of Filler Reinforced Rubber under Physical Aging at Room Temperature. Mdpi Polymers vol. 15 (7), 1806-1806.
  • Gu Y, Han C, Chen Y, Liu S and Wang X (2023). Large Region Targets Observation Scheduling by Multiple Satellites Using Resampling Particle Swarm Optimization. Ieee Transactions On Aerospace and Electronic Systems vol. 59 (2), 1800-1815.
  • Yu C, Zhu YP, Luo H, Luo Z and Li L (2023). Design assessments of complex systems based on design oriented modelling and uncertainty analysis. Mechanical Systems and Signal Processing vol. 188
  • Rutherford KJ, Akutagawa K, Ramier JL, Tunnicliffe LB and Busfield JJC (2023). The Influence of Carbon Black Colloidal Properties on the Parameters of the Kraus Model. Mdpi Polymers vol. 15 (7), 1675-1675.
  • Kapse S, Rahman D, Avital EJ, Venkatesan N, Smith T, Cantero-Garcia L, Motallebi F, Samad A and Beggs CB (2023). Conceptual Design of a UVC-LED Air Purifier to Reduce Airborne Pathogen Transmission—A Feasibility Study. Mdpi Ag Fluids vol. 8 (4), 111-111.
  • Siddall R, Zufferey R, Armanini S, Zhang K, Sareh S and Sergeev E (2023). The Natural Robotics Contest: crowdsourced biomimetic design. Iop Publishing Bioinspiration & Biomimetics vol. 18 (3)
  • Boulafentis T, Lacassagne T, Cagney N and Balabani S (2023). Experimental insights into elasto-inertial transitions in Taylor-Couette flows. Philosophical Transactions of The Royal Society a: Mathematical, Physical and Engineering Sciences vol. 381 (2243)
  • Xu S, Zhao J, Wu H, Zhang S, Müller JD, Huang H, Rahmati M and Wang D (2023). A Review of Solution Stabilization Techniques for RANS CFD Solvers. Aerospace vol. 10 (3)
  • Wang M, Mi S, Avital E, Li N, Chen Y and Williams J (2023). A Study on the Influence of Submergence Ratio on the Transport of Suspended Sediment in a Partially Vegetated Channel Flow. Water Resources Research vol. 59, 1-25.
  • Cheng ZQ, Tan W, Xiong JJ, He EM, Xiong TH and Wang YP (2023). Modelling fatigue behaviours and lifetimes of novel GLARE laminates under random loading spectrum. Elsevier Composite Structures vol. 311
  • Abdu Aliyu AA, Panwisawas C, Shinjo J, Puncreobutr C, Reed RC, Poungsiri K and Lohwongwatana B (2023). Laser-based Additive Manufacturing of Bulk Metallic Glasses: Recent Advances and Future Perspectives for Biomedical Applications. Elsevier Journal of Materials Research and Technology vol. 23, 2956-2990.
  • Shen X, Avital E, Ikram Z, Yang L, Korakianitis T and Dala L (2023). Influence of curvature distribution smoothing on the reduction of aerofoil self-noise. International Journal of Numerical Methods For Heat &Amp Fluid Flow vol. ahead-of-print (ahead-of-print)
  • Gurbatov SN, Demin IY, Lisin AA, Karabasov SA and Tyurina AV (2023). Numerical Simulation of the Evolution of an Intense Aerodynamic Jet in the Far-Field of Propagation. Mathematical Models and Computer Simulations vol. 15 (1), 109-117.
  • Solntsev IA and Karabasov SA (2023). Development of Unstructured Code for Rotating Zones Based on the Cabaret Method with Improved Spectral Properties. Mathematical Models and Computer Simulations vol. 15 (1), 125-137.
  • Solntsev I, Chintagunta A, Markesteijn A and Karabasov S (2023). CABARET on rotating meshes. Elsevier Applied Mathematics and Computation
  • Aliyu AAA, Poungsiri K, Shinjo J, Panwisawas C, Reed RC, Puncreobutr C, Tumkanon K, Kuimalee S and Lohwongwatana B (2023). Additive manufacturing of tantalum scaffolds: Processing, microstructure and process-induced defects. Elsevier Bv International Journal of Refractory Metals and Hard Materials, 106132-106132.
  • Shinjo J, Kutsukake A, Arote AS, Tang YT, McCartney DG, Reed RC and Panwisawas C (2023). Physics-based thermal-chemical-fluid-microstructure modelling of in-situ alloying using additive manufacturing: Composition-microstructure control. Elsevier Bv Additive Manufacturing, 103428-103428.
  • Rui WANG, Jiang WANG, Tingwei CAO, Ruixin ZHAO, Lu X, Wei GUAN, Tao HU, SHUAI S, Songzhe XU, Weidong XUAN, PANWISAWAS C, Chaoyue CHEN and Zhongming REN (2023). Microstructure characteristics of a René N5 Ni-based single-crystal superalloy prepared by laser-directed energy deposition. Elsevier Additive Manufacturing, 103363-103363.
  • Liu H, Liu J, Hall ZEC, Brooks RA, Crocker JWM, Joesbury AM, Harper LT, Blackman BRK, Kinloch AJ and Dear JP (2023). Modelling the effects of patch-plug configuration on the impact performance of patch-repaired composite laminates. Elsevier Composites Science and Technology vol. 233, 109917-109917.
  • Tang YT, Panwisawas C, Jenkins BM, Liu J, Shen Z, Salvati E, Gong Y, Ghoussoub JN, Michalik S, Roebuck B, Bagot PAJ, Lozano-Perez S, Grovenor CRM, Moody MP, Korsunsky AM, Collins DM and Reed RC (2023). Multi-length-scale study on the heat treatment response to supersaturated nickel-based superalloys: Precipitation reactions and incipient recrystallisation. Elsevier Additive Manufacturing, 103389-103389.
  • Zhu YP, Lang ZQ, Fujita K and Takewaki I (2023). Analysis and design of non-linear seismic isolation systems for building structures—An overview. Frontiers in Built Environment vol. 8
  • Althoefer K and Hutchinson S (2023). Welcome. Proceedings - Ieee International Conference On Robotics and Automation vol. 2023-May
  • Gui Y, Lang ZQ, Liu Z, Zhu Y, Laalej H and Curtis D (2023). Unsupervised Detection of Tool Breakage: A Novel Approach Based on Time and Sensor Domain Data Analysis. Ieee Transactions On Instrumentation and Measurement vol. 72
  • Gryazev V, Markesteijn AP and Karabasov SA (2023). Robustness of Reduced-Order Jet Noise Models. Aiaa Journal vol. 61 (1), 315-328.
  • Huang W, Yang JJ, Sladek J, Sladek V and Wen PH (2023). Meshless finite block method with infinite elements for axisymmetric cracked solid made of functionally graded materials. European Journal of Mechanics, a/Solids vol. 97
  • Kadochnikova A, Zhu Y, Lang ZQ and Kadirkamanathan V (2023). Integrated Identification of the Nonlinear Autoregressive Models With Exogenous Inputs (NARX) for Engineering Systems Design. Ieee Transactions On Control Systems Technology vol. 31 (1), 394-401.
  • Zhang Q, Yu X, Scarpa F, Barton D, Xia Y, Shaw A, Zhu Y and Lang ZQ (2023). Hysteretic behaviour of uniaxially thermoformed auxetic foams under 3-point bending low-frequency vibration. Nonlinear Dynamics vol. 111 (2), 1019-1045.
  • Vepa R (2023). Flight Dynamics, Simulation, and Control: For Rigid and Flexible Aircraft: Second Edition.
  • Xiang D, Shui T, Qiao H, Tan W, Harkin-Jones E, Zhang J, Ji P, Wang P, Wang B, Zhao C, Li H, Wu Y and Li Y (2023). Enhanced interfacial interaction, mechanical properties and thermal stability of basalt fiber/epoxy composites with multi-scale reinforcements. Composite Interfaces
  • Hassan MM, Harris J, Busfield JJC and Bilotti E (2023). A review of the green chemistry approaches to leather tanning in imparting sustainable leather manufacturing. Green Chemistry