Centre for Intelligent Transport

Publications

   2024   |   2023   |   2022   |   2021   |   2020   |   2019   |   2018   |   2017   |   2016   |   2015   |   2014   
  • Li F, Smoukov S, Korotkin I, Taiji M and Karabasov S (2022). The interfacial layer breaker: a violation of Stokes’ law in high-speed Atomic Force Microscope flows. American Chemical Society Langmuir  
    20-12-2022
  • Weiszer M, Burke EK and Chen J (2022). Search graph structure and its implications for multi-graph constrained routing and scheduling problems. Nature Research Scientific Reports vol. 12 (1)  
    01-12-2022
  • Zhang S, Han Y, Lacassagne T, Cagney N, Naveira-Cotta CP, Balabani S and Tiwari MK (2022). Flow dynamics and mixing past pairs of confined microfluidic cylinders. Elsevier Chemical Engineering Science vol. 267  
    25-11-2022
  • Long S, Zong H, Liu T and Yao X (2022). Soft impact behavior of composite I-beams. Elsevier Composite Structures vol. 304  
    21-11-2022
  • Wang X, Brownlee AEI, Weiszer M, Woodward JR, Mahfouf M and Chen J (2022). An Interval Type-2 Fuzzy Logic Based Map Matching Algorithm for Airport Ground Movements. Institute of Electrical and Electronics Engineers Ieee Transactions On Fuzzy Systems  
    21-11-2022
  • Fuyang C, Gong J, Wang X, Panwisawas C and Chen B (2022). A physics-based life prediction model of HP40Nb heat-resistant alloy in a coupled creep-carburisation environment. Elsevier Materials Science and Engineering: A vol. 860, 144260-144260.   
    15-11-2022
  • Chehrmonavari H, Kakaee A, Hosseini SE, Desideri U, Tsatsaronis G, Floerchinger G, Braun R and Paykani A (2022). Hybridizing solid oxide fuel cells with internal combustion engines for power and propulsion systems: A review. Elsevier Renewable and Sustainable Energy Reviews vol. 171  
    08-11-2022
  • Jamone L (2022). Modelling human tool use in robots. Nature Research Nature Machine Intelligence  
    07-11-2022
  • Jawahar HK, Karabasov S and Azarpeyvand M (2022). Jet installation noise reduction using porous treatments. Elsevier Journal of Sound and Vibration  
    04-11-2022
  • Funabashi S, Yan G, Hongyi F, Schmitz A, Jamone L, Ogata T and Sugano S (2022). Tactile Transfer Learning and Object Recognition With a Multifingered Hand Using Morphology Specific Convolutional Neural Networks. Institute of Electrical and Electronics Engineers Ieee Transactions On Neural Networks and Learning Systems  
    03-11-2022
  • Giannenas AE, Bempedelis N, Schuch FN and Laizet S (2022). A Cartesian Immersed Boundary Method Based on 1D Flow Reconstructions for High-Fidelity Simulations of Incompressible Turbulent Flows Around Moving Objects. Flow, Turbulence and Combustion vol. 109 (4), 931-959.   
    01-11-2022
  • Mi S, Wang M, Avital EJ, Williams JJR and Chatjigeorgiou IK (2022). An implicit Eulerian–Lagrangian model for flow-net interaction using immersed boundary method in OpenFOAM. Elsevier Bv Ocean Engineering vol. 264, 112843-112843.   
    22-10-2022
  • Liu H, Zhou J, Zhang D, Li S and Giannopoulos I (2022). Effects of contact friction and ply blocking on the crush behaviour of thin-walled composite structures: A numerical study. Elsevier Thin-Walled Structures vol. 182, 110214-110214.   
    18-10-2022
  • Liang H, Hao G, Olszewski OZ, Jiang Z and Zhang K (2022). Design of a foldable origami mechanism with helical motion inspired by the Resch Triangular Tessellation. Elsevier Mechanism and Machine Theory vol. 179  
    02-10-2022
  • Du W, Li B, Chen J, Lv Y and Li Y (2022). A Spatiotemporal Hybrid Model for Airspace Complexity Prediction. Institute of Electrical and Electronics Engineers Ieee Intelligent Transportation Systems Magazine  
    29-09-2022
  • Mao JJ, Wang S, Tan W and Liu M (2022). Modular multistable metamaterials with reprogrammable mechanical properties. Elsevier Engineering Structures vol. 272  
    21-09-2022
  • Zhang K (2022). Aerial Additive Manufacturing with Multiple Autonomous Robots. Nature Publishing Group Nature  
    21-09-2022
  • Liu H, Brooks RA, Hall ZEC, Liu J, Crocker JWM, Joesbury AM, Harper LT, Blackman BRK, Kinloch AJ and Dear JP (2022). Experimental and numerical investigations on the impact behaviour of pristine and patch-repaired composite laminates. The Royal Society Philosophical Transactions of The Royal Society a: Mathematical, Physical and Engineering Sciences vol. 380 (2232), 20210340-20210340.   
    19-09-2022
  • Chen YX, Shaheed MH and Vepa R (2022). Active Blade Pitch Control and Stabilization of a Wind Turbine Driven PMSG For Power Output Regulation., Editors: McGowan JG. Sage Publications Wind Engineering  
    19-09-2022
  • Weizhou WU, Shipeng LI, Xuda QIN, Wentao LIU, Xin CUI, Hao LI, Mengrui SHI and Haibao LIU (2022). Effects of fiber orientation on tool wear evolution and wear mechanism when cutting carbon fiber reinforced plastics. Elsevier Chinese Journal of Aeronautics vol. 36 (5), 549-565.   
    07-09-2022
  • Sun C, Agha SA, Mohamed Z and Shaheed MH (2022). Optimised Sliding Mode Control of a Hexacopter: Simulation and Experiments. Mdpi Electronics vol. 11 (16)  
    11-08-2022
  • Liu H, Zhou J, Kong X and Li S (2022). Fracture behaviour of fibre-reinforced composite materials subjected to shear loading: An experimental and numerical study. Elsevier International Journal of Lightweight Materials and Manufacture vol. 6 (1), 108-116.   
    07-08-2022
  • Xu J, Zhang C, Wang L, Zhu H, Tang H and Avital EJ (2022). Variation of Dominant Discharge along the Riverbed Based on Numerical and Deep-Learning Models: a Case Study in the Middle Huaihe River, China. Journal of Hydrology vol. 612, 128285-128285.   
    05-08-2022
  • Miloh T and Avital EJ (2022). Travelling-Wave Electrophoresis, Electro-Hydrodynamics, Electro-Rotation, and Symmetry- Breaking of a Polarizable Dimer in Non-Uniform Fields. Mdpi Ag Micromachines vol. 13 (8), 1173-1-1173-19.   
    25-07-2022
  • Wang X, Wang Y, Zhang K, Althoefer K and Su L (2022). Learning to sense three-dimensional shape deformation of a single multimode fiber. Nature Research Scientific Reports  
    25-07-2022
  • Vizcaíno-Vergara M, Tunnicliffe LB, Busfield JJC and Kari L (2022). Viscoelastic characterisation of carbon black reinforced rubber using the torsion pendulum: Guidelines and temperature sweep results. Elsevier Polymer Testing vol. 114  
    08-07-2022
  • Ismail A and Taraki N (2022). The role of geometry on controlled cavity collapse and top jet drop. American Institute of Physics Physics of Fluids  
    01-07-2022
  • Wu GH, Du X, Wang XW, Chen XJ, Zhang WF and Mao CH (2022). Multi-satellite emergency scheduling algorithm considering dynamic selection of neighborhood structure. Kongzhi Yu Juece/Control and Decision vol. 37 (7), 1685-1694.   
    01-07-2022
  • Suponitsky V, Khalzov IV and Avital EJ (2022). Magnetohydrodynamics Solver for a Two-Phase Free Surface Flow Developed in OpenFOAM. Mdpi Ag Fluids vol. 7 (7), 210-1-210-36.   
    21-06-2022
  • Gryazev V, Markesteijn A, Karabasov S, Lawrence J and Proença A (2022). Flow and Noise Predictions of the Isolated Subsonic Jets from the Doak Laboratory Experiment. American Institute of Aeronautics and Astronautics Aiaa Journal  
    13-06-2022
  • Xu J, Xia J, Wang L, Avital EJ, Zhu H and Wang Y (2022). An improved Eulerian method in three-dimensional direct numerical simulation on the local scour around a cylinder. Elsevier Bv Applied Mathematical Modelling  
    09-06-2022
  • Hall ZEC, Liu J, Brooks RA, Liu H, Crocker JWM, Joesbury AM, Harper LT, Blackman BRK, Kinloch AJ and Dear JP (2022). The effectiveness of patch repairs to restore the impact properties of carbon-fibre reinforced-plastic composites. Elsevier Engineering Fracture Mechanics vol. 270, 108570-108570.   
    06-06-2022
  • Liu J, Tang X, Li S, Qin X, Li H, Wu W, Srijana Y, Liu W and Liu H (2022). Optimization of multi-tooth milling tool for interlaminar damage suppression in the milling of carbon fiber–reinforced polymers. Springer International Journal of Advanced Manufacturing Technology vol. 121 (1-2), 1235-1251.   
    27-05-2022
  • Tan W (2022). Modelling Pre-fatigue, Low-velocity Impact and Post-impact Fatigue Behaviours of Composite Helicopter Tail Structures under Multipoint Coordinated Loading Spectrum. Elsevier Thin-Walled Structures  
    10-05-2022
  • Brooks RA, Wang H, Ding Z, Xu J, Song Q, Liu H, Dear JP and Li N (2022). A review on stamp forming of continuous fibre-reinforced thermoplastics. Elsevier International Journal of Lightweight Materials and Manufacture vol. 5 (3), 411-430.   
    10-05-2022
  • Zhang D, Zheng X, Zhou J, Song X, Jia P, Liu H and Liu X (2022). Effect of Braiding Architectures on the Mechanical and Failure Behavior of 3D Braided Composites: Experimental Investigation. Mdpi Polymers vol. 14 (9)  
    08-05-2022
  • Stettler MEJ, Nishida RT, de Oliveira PM, Mesquita LCC, Johnson TJ, Galea ER, Grandison A, Ewer J, Carruthers D, Sykes D, Kumar P, Avital E, Obeysekara AIB, Doorly D, Hardalupas Y, Green DC, Coldrick S, Parker S and Boies AM (2022). Source terms for benchmarking models of SARS-CoV-2 transmission via aerosols and droplets. The Royal Society Royal Society Open Science vol. 9 (5)  
    04-05-2022
  • Jiang F, Yu M, Peng X and Wen PH (2022). Effect of nanoscale amorphization on dislocation emission from a semi-elliptical surface crack tip in nanocrystalline materials. Mathematics and Mechanics of Solids vol. 27 (5), 844-857.   
    01-05-2022
  • Nenchev B, Panwisawas C, Yang X, Fu J, Dong Z, Tao Q, Gebelin JC, Dunsmore A, Dong H, Li M, Tao B, Li F, Ru J and Wang F (2022). Metallurgical Data Science for Steel Industry: A Case Study on Basic Oxygen Furnace. Steel Research International vol. 93 (12)  
    28-04-2022
  • Li Y, Chen X, Zhou J, Liu X, Zhang D, Du F, He W, Jia P and Liu H (2022). A review of high‐velocity impact on fiber‐reinforced textile composites: Potential for aero engine applications. Wiley Open Access International Journal of Mechanical System Dynamics vol. 2 (1), 50-64.   
    02-04-2022
  • Zheng J, Maharaj C, Liu J, Chai H, Liu H and Dear JP (2022). A Comparative Study on the Failure Criteria for Predicting the Damage Initiation in Fiber-Reinforced Composites. Springer Mechanics of Composite Materials vol. 58 (1), 125-140.   
    23-03-2022
  • Kyei-Manu W, Herd C, Chowdhury M, Busfield J and Tunnicliffe L (2022). The Influence of Colloidal Properties of Carbon Black on Static and Dynamic Mechanical Properties of Natural Rubber. Mdpi Polymers vol. 14, 1194-1194.   
    16-03-2022
  • Obadina OO, Thaha MA, Mohamed Z and Shaheed MH (2022). Grey-box modelling and fuzzy logic control of a Leader-Follower Robot manipulator system: A hybrid Grey Wolf — Whale Optimization approach. Elsevier Isa Transactions  
    08-03-2022
  • Paykani A, Chehrmonavari H, Tsolakis A, Alger T, Northrop WF and Reitz RD (2022). Synthesis gas as a fuel for internal combustion engines in transportation. Elsevier Progress in Energy and Combustion Science vol. 90  
    18-02-2022
  • Ataka A, Lam HK and Althoefer K (2022). Magnetic-Field-Inspired Navigation for Robots in Complex and Unknown Environments. Frontiers Media Frontiers in Robotics and Ai vol. 9  
    18-02-2022
  • Ragab R, Parker J, Li M, Liu T, Morris A and Sun W (2022). Requirements for and challenges in developing improved creep ductility-based constitutive models for tempered martensitic CSEF steels. Elsevier Journal of Materials Research and Technology vol. 17, 3337-3360.   
    17-02-2022
  • Dehban A, Zhang S, Cauli N, Jamone L and Santos-Victor J (2022). Learning Deep Features for Robotic Inference from Physical Interactions. Institute of Electrical and Electronics Engineers Ieee Transactions On Cognitive and Developmental Systems  
    17-02-2022
  • Kirby E, Zenha R and Jamone L (2022). Comparing Single Touch to Dynamic Exploratory Procedures for Robotic Tactile Object Recognition. Institute of Electrical and Electronics Engineers Ieee Robotics and Automation Letters vol. 7 (2), 4252-4258.   
    14-02-2022
  • Vepa R (2022). Feedback Tracking Control of Optimal Reference Trajectories for Spacecraft Relative Motion. Elsevier Advances in Space Research  
    11-02-2022
  • Xu J, Xia J, Wang L, Zhu H and Avital EJ (2022). Direct numerical simulation on local scour around the cylinder induced by internal solitary waves propagating over a slope. Elsevier Bv Ocean Engineering vol. 247, 110525-110525.   
    08-02-2022
  • Tan W and Martínez-Pañeda E (2022). Phase field fracture predictions of microscopic bridging behaviour of composite materials. Elsevier Composite Structures vol. 286  
    05-02-2022
  • Hohenberger TW and Busfield JJC (2022). METHOD TO GENERATE ACCURATE ELASTIC AND HYPERELASTIC UNIAXIAL TENSION STRESS–STRAIN DATA WITHOUT AN EXTENSOMETER. Rubber Chemistry and Technology  
    04-02-2022
  • Diaz-Lopez RA, Wen PH and Shelton JC (2022). Influence of taper design and loading on taper micromotion. Elsevier Journal of The Mechanical Behavior of Biomedical Materials vol. 128  
    29-01-2022
  • Kwon JR and Vepa R (2022). Feedback control of limit cycle oscillations and transonic buzz, using the nonlinear transonic small disturbance aerodynamics. Journal of Vibration and Control, 10775463211-10775463211.   
    28-01-2022
  • Zhang J, Xiao R, Wen P, Ju C, Lin WC and He R (2022). Dual interpolation boundary face method for 3-D potential problem based on binary tree grids. Elsevier Computer Methods in Applied Mechanics and Engineering vol. 390  
    06-01-2022
  • Ma Y, Du W, Chen J, Zhang Y, Lv Y and Cao X (2022). A Spatiotemporal Neural Network Model for Estimated-Time-of-Arrival Prediction of Flights in a Terminal Maneuvering Area. Institute of Electrical and Electronics Engineers Ieee Intelligent Transportation Systems Magazine  
    05-01-2022
  • Huang W, Yang J, Sladek J, Sladek V and Wen P (2022). Semi-Infinite Structure Analysis with Bimodular Materials with Infinite Element. Materials vol. 15 (2)  
    01-01-2022