Dr Wei Tan
BEng, PhD, FIMMM, FHEA
All Publications
Page 1 of 2
2025
- SPDTM: A shapley-value based preference discovery and task matching to maximize satisfaction in mobile crowd sensing
Huang Z, Sun Z, Tan W, Song HH, Wang T, Zhang S, Liu A
Computer Networks, Elsevier vol. 271
01-10-2025 - Computational Intelligence in Stochastic Reconstruction of Porous Microstructures for Image-Based Poro/Micro-Mechanical Modeling
Archives of Computational Methods in Engineering, Springer Nature, 1-69.
26-08-2025 - Mechano-electrochemical analysis of lithiation-induced deformation of composite electrodes using carbon fibre as current collector
Mao R, Feng S, Lei Z, Bai R, Tan W
Composites Science and Technology, Elsevier vol. 269
01-08-2025 - Fatigue Reliability Evaluation of Composite Structures with Low-Velocity Impact Damage
Xia J, Liu H, Cheng Z, zhu Z, Tan W, Kang G
01-07-2025 - Comparison of Three Matrix Damage Models for Predicting Mechanical Behaviors of Unidirectional Composites
Cheng Z-Q, Zhong Y-Z, Liu H, Zhu Z-W, Tan W, Huo C
International Journal of Applied Mechanics, World Scientific Publishing vol. 17 (06)
01-06-2025 - Compressive failure mechanisms of fibre metal laminates with 2/1 and 3/2 configurations after low-velocity impact
Cheng Z-Q, Xia J, Liu H, Zhu Z-W, Tan W
Thin-Walled Structures, Elsevier vol. 211
01-06-2025 - Stochastic reconstruction of multiphase composite microstructures using statistics-encoded neural network for poro/micro-mechanical modelling
Fu J, Tan W
Computer Methods in Applied Mechanics and Engineering, Elsevier vol. 441
01-06-2025 - Multi-objective Bayesian optimisation of spinodoid cellular structures for crush energy absorption
Kansara H, Khosroshahi SF, Guo L, Bessa MA, Tan W
Computer Methods in Applied Mechanics and Engineering, Elsevier vol. 440
01-05-2025 - A novel multistable honeycomb structure with tailored variable-length functions
Wang R, Niu B, Tan W
Engineering Structures, Elsevier vol. 324
01-02-2025 - Effect of heating rate on thermal behaviour of plasticised hard polyurethane-urea
Restasari A, Kaur A, Naderizadeh S, Qi X, Akutagawa K, Spontak RJ, Busfield JJC, Tan W
Journal of Physics Conference Series, IOP Publishing vol. 2945 (1), 012047-012047.
01-02-2025
2024
- Advanced computational modelling of composite materials
Cheng Z-Q, Liu H, Tan W
Engineering Fracture Mechanics, Elsevier vol. 305
01-07-2024 - Characterisation of Polyurethane-urea as Leading-Edge Erosion Resistant Materials of Wind Turbine Blades
Restasari A, Naderizadeh S, Kaur A, Akutagawa K, Busfield J, Tan W
IOP Conference Series Earth and Environmental Science, IOP Publishing vol. 1344 (1), 012015-012015.
01-05-2024 - Failure analysis of glass fiber and basalt fiber reinforced polymer composites under an extreme environment with high‐temperature, high‐pressure and H2S/CO2 exposure
Sun H, Xiang D, Liu Z, Liu L, Harkin‐Jones E, Wang M, Tan W, Luo P et al.
Polymer Composites, Wiley vol. 45 (11), 10124-10136.
18-04-2024
2023
- Enhanced composite thermal conductivity by percolated networks of in-situ confined-grown carbon nanotubes
Zhang X, Tan W, Carey T, Wen B, He D, Arbab A, Groombridge A, Smail F et al.
Nano Research, Tsinghua University Press vol. 16 (11), 12821-12829.
01-11-2023 - Inverse design and additive manufacturing of shape-morphing structures based on functionally graded composites
Kansara H, Liu M, He Y, Tan W
Journal of The Mechanics and Physics of Solids, Elsevier vol. 180
01-11-2023 - Temperature-dependent cutting physics in orthogonal cutting of carbon fibre reinforced thermoplastic (CFRTP) composite
Ge J, Tan W, Ahmad S, Falzon BG, Catalanotti G, Higgins C, Jin Y, Sun D
Composites Part a: Applied Science and Manufacturing, Elsevier vol. 176
05-10-2023 - Electrical, mechanical and damage self-sensing properties of basalt fiber reinforced polymer composites modified by electrophoretic deposition
Sun H, Xiang D, Zhang J, Tan W, Harkin-Jones E, Wang J, Wang M, Wang B et al.
Progress in Natural Science: Materials International, Elsevier vol. 33 (5), 593-600.
01-10-2023 - Porosity-dependent stability analysis of bio-inspired cellular nanocomposite shells
Sobhani Aragh B, Tan W, Borzabadi Farahani E, Al-Greer M, Hughes D
International Journal of Mechanical Sciences, Elsevier
23-09-2023 - Enhanced interfacial interaction, mechanical properties and thermal stability of basalt fiber/epoxy composites with multi-scale reinforcements
Xiang D, Shui T, Qiao H, Tan W, Harkin-Jones E, Zhang J, Ji P, Wang P et al.
Composite Interfaces, Taylor & Francis vol. 30 (12), 1387-1409.
02-06-2023 - Hygroscopic phase field fracture modelling of composite materials
Au-Yeung K, Quintanas-Corominas A, Martínez-Pañeda E, Tan W
Engineering With Computers, Springer
24-04-2023 - High Temperature Tensile and Fatigue Crack Propagation Properties of GH3536 Alloy Fabricated by Additive Manufacturing
Xiao L, Peng Z, Cai Z, Zhao X, Zhong Q, Yu H, Wang S, Tan W
Xiyou Jinshu Cailiao Yu Gongcheng Rare Metal Materials and Engineering vol. 52 (3), 1015-1021.
01-03-2023 - Modelling fatigue behaviours and lifetimes of novel GLARE laminates under random loading spectrum
Cheng ZQ, Tan W, Xiong JJ, He EM, Xiong TH, Wang YP
Composite Structures, Elsevier vol. 311
21-02-2023
2022
- Modular multistable metamaterials with reprogrammable mechanical properties
Mao JJ, Wang S, Tan W, Liu M
Engineering Structures, Elsevier vol. 272
21-09-2022 - Modelling Pre-fatigue, Low-velocity Impact and Post-impact Fatigue Behaviours ofQ Composite Helicopter Tail Structures under Multipoint Coordinated Loading Spectrum
Cheng Z-Q, Tan W, Xiong J-J
Thin-Walled Structures, Elsevier
10-05-2022 - Influence of high-temperature, high-pressure, and acidic conditions on the structure and properties of high-performance organic fibers
Wang X, Li P, Xiang D, Wang B, Zhang Z, Zhang J, Zhao C, Li H et al.
Materials Testing, De Gruyter vol. 64 (5), 623-635.
01-05-2022 - Phase field fracture predictions of microscopic bridging behaviour of composite materials
Tan W, Martínez-Pañeda E
Composite Structures, Elsevier vol. 286
05-02-2022 - 激光成形GH3536合金的显微组织与力学性能研究
Liu Liming 刘, Peng Zhenwu 彭, Xiao Lairong 肖, Wang Huan 王, Zhao Xiaojun 赵, Cai Zhenyang 蔡, Tan Wei 谭
Laser & Optoelectronics Progress, Shanghai Institute of Optics and Fine Mechanics vol. 59 (19)
01-01-2022
2021
- Fatigue Crack Growth and Life Prediction of 7075-T62 Aluminium-alloy Thin-sheets with Low-velocity Impact Damage under Block Spectrum Loading
Cheng Z-Q, Xiong J-J, Tan W
International Journal of Fatigue, Elsevier, 106618-106618.
21-10-2021 - The Nail Penetration Behaviour of Carbon Nanotube Composite Electrodes for Energy Storage
Koliolios E, Mills DG, Busfield JJC, Tan W
Frontiers in Materials, Frontiers Media vol. 8, 741541-741541.
21-10-2021 - High-Performance Flexible Strain Sensors Based on Biaxially Stretched Conductive Polymer Composites with Carbon Nanotubes Immobilized on Reduced Graphene Oxide
Zhang X, Xiang D, Wu Y, Harkin-Jones E, Shen J, Ye Y, Tan W, Wang J et al.
Composites Part a: Applied Science and Manufacturing, Elsevier, 106665-106665.
04-10-2021 - A crystal plasticity phenomenological model to capture the non-linear shear response of carbon fibre reinforced composites
Tan W, Falzon BG
International Journal of Lightweight Materials and Manufacture vol. 4 (1), 99-109.
01-07-2021 - Data-driven modelling of scalable spinodoid structures for energy absorption
Kansara H, Koh G, Varghese M, Luk JZX, Gomez EF, Kumar S, Zhang H, Martínez-Pañeda E et al.
Ukacm Conference Proceeding 2021
01-05-2021 - Catalyst-Mediated Enhancement of Carbon Nanotube Textiles by Laser Irradiation: Nanoparticle Sweating and Bundle Alignment
Gspann TS, Kaniyoor A, Tan W, Kloza PA, Bulmer JS, Mizen J, Divitini G, Terrones J et al.
Catalysts, Mdpi Ag vol. 11 (3), 368-368.
11-03-2021 - Phase field predictions of microscopic fracture and R-curve behaviour of fibre-reinforced composites
Tan W, Martínez-Pañeda E
Composites Science and Technology, Elsevier Bv, 108539-108539.
31-01-2021 - 激光增材制造GH3536合金的低周疲劳行为
Xiao Lairong 肖, Tan Wei 谭, Liu Liming 刘, Tu Xiaoxuan 涂, Peng Zhenwu 彭, Wang Huan 王, Zhao Xiaojun 赵
Chinese Journal of Lasers, Shanghai Institute of Optics and Fine Mechanics vol. 48 (22)
01-01-2021
2020
- A physically-based constitutive model for the shear-dominated response and strain rate effect of carbon fibre reinforced composites
Tan W, Liu B
Composites Part B: Engineering, Elsevier
08-04-2020
2019
- Experimental study on shear properties of concrete pile-clay interface considering surface roughness of structure
Wang Y, Li Y, Tan W, Tang M, Du W
Zhongnan Daxue Xuebao Ziran Kexue Ban Journal of Central South University Science and Technology vol. 50 (10), 2502-2509.
26-10-2019 - The mechanical and electrical properties of direct-spun carbon nanotube mat-epoxy composites
Tan W, Stallard JC, Smail FR, Boies AM, Fleck NA
Carbon vol. 150, 489-504.
01-09-2019 - Compressive failure of woven fabric reinforced thermoplastic composites with an open-hole: An experimental and numerical study
Liu H, Falzon BG, Li S, Tan W, Liu J, Chai H, Blackman BRK, Dear JP
Composite Structures, Elsevier vol. 213, 108-117.
01-04-2019 - Assessment of failure criteria and damage evolution methods for composite laminates under low-velocity impact
Li X, Ma D, Liu H, Tan W, Gong X, Zhang C, Li Y
Composite Structures, Elsevier vol. 207, 727-739.
01-01-2019
2018
- Cohesive zone modeling of the autoclave pressure effect on the delamination behavior of composite laminates
Chang T, Zhan L, Tan W, Wu X
Journal of Reinforced Plastics and Composites, Sage Publications vol. 37 (24), 1468-1480.
14-09-2018 - An experimental method to determine the intralaminar fracture toughness of high-strength carbon-fibre reinforced composite aerostructures
Liu H, Falzon BG, Catalanotti G, Tan W
The Aeronautical Journal, Cambridge University Press (Cup) vol. 122 (1255), 1352-1370.
30-07-2018 - High-fidelity characterization on anisotropic thermal conductivity of carbon nanotube sheets and on their effects of thermal enhancement of nanocomposites
Zhang X, Tan W, Smail F, De Volder M, Fleck N, Boies A
Nanotechnology, IOP Publishing vol. 29 (36)
04-07-2018 - The mechanical and electrical properties of direct-spun carbon nanotube mats
Stallard JC, Tan W, Smail FR, Gspann TS, Boies AM, Fleck NA
Extreme Mechanics Letters vol. 21, 65-75.
01-05-2018 - The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: Experimental characterization and multiscale modelling
Tan W, Naya F, Yang L, Chang T, Falzon BG, Zhan L, Molina-Aldareguía JM, González C et al.
Composites Part B: Engineering vol. 138, 206-221.
01-04-2018 - Experimental and numerical studies on the impact response of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates
Liu H, Falzon BG, Tan W
Composites Part B Engineering, Elsevier vol. 136, 101-118.
01-03-2018 - A multiscale methodology quantifying the sintering temperature‐dependent mechanical properties of oxide matrix composites
Jiang R, Yang L, Liu H, Tan W, Sun X, Cheng H, Mao W
Journal of The American Ceramic Society, Wiley vol. 101 (7), 3168-3180.
09-02-2018 - Predicting the Compression-After-Impact (CAI) strength of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates
Liu H, Falzon BG, Tan W
Composites Part a Applied Science and Manufacturing, Elsevier vol. 105, 189-202.
01-02-2018
2017
- Comment on “A tensorial based progressive damage model for fibre reinforced polymers”
Falzon BG, Liu H, Tan W
Composite Structures, Elsevier vol. 176, 877-882.
01-09-2017 - Effect of autoclave pressure on interfacial properties at micro- and macro- level in polymer-matrix composite laminates
Chang T, Zhan L, Tan W, Li S
Fibers and Polymers, Springer Nature vol. 18 (8), 1614-1622.
01-08-2017