Centre for Sustainable Engineering


   2024   |   2023   |   2022   |   2021   |   2020   |   2019   |   2018   |   2017   |   2016   |   2015   |   2014   
  • Cutarelli A, Ghio S, Zasso J, Speccher A, Scarduelli G, Roccuzzo M, Crivellari M, Maria Pugno N, Casarosa S, Boscardin M and Conti L (2019). Vertically-Aligned Functionalized Silicon Micropillars for 3D Culture of Human Pluripotent Stem Cell-Derived Cortical Progenitors. Mdpi Ag Cells vol. 9 (1) 
  • Remesh N, Kumar S, Guiney I, Humphreys CJ, Raghavan S, Muralidharan R and Nath DN (2019). A Novel Technique to Investigate the Role of Traps in the Off‐State Performance of AlGaN/GaN High Electron Mobility Transistor on Si Using Substrate Bias. Wiley Physica Status Solidi (a) – Applications and Materials Science vol. 217 (7) 
  • Trifiletti V, Degousée T, Manfredi N, Fenwick O, Colella S and Rizzo A (2019). Molecular Doping for Hole Transporting Materials in Hybrid Perovskite Solar Cells. Mdpi Ag Metals vol. 10 (1), 14-14.  
  • Pugno NM (2019). Frontiers in Materials Has the Ambition of Taking Up the “Grand Challenge” of Following Leonardo da Vinci's Legacy. Frontiers Media Frontiers in Materials vol. 6 
  • Chen Q, Pugno NM and Li Z (2019). The rotation toughening mechanism of barb–barbule joint in the barb delamination of feathers. Acta Mechanica vol. 231 (3), 1173-1186.  
  • Iacoviello F, Lu X, Mitchell TM, Brett DJL and Shearing PR (2019). The Imaging Resolution and Knudsen Effect on the Mass Transport of Shale Gas Assisted by Multi-length Scale X-Ray Computed Tomography. Nature Research Scientific Reports vol. 9 (1) 
  • Liu T, Zhao X, Li J, Liu Z, Liscio F, Milita S, Schroeder BC and Fenwick O (2019). Enhanced control of self-doping in halide perovskites for improved thermoelectric performance. Nature Research (Part of Springer Nature) Nature Communications vol. 10 (1) 
  • Morresi T, Pedrielli A, Beccara SA, Gabbrielli R, Pugno NM and Taioli S (2019). Structural, electronic and mechanical properties of all-sp2 carbon allotropes with density lower than graphene. Elsevier Carbon vol. 159, 512-526.  
  • Pu JH, Sun J, Sheng Q, Wang W and Wang HS (2019). Dependences of Formation and Transition of the Surface Condensation Mode on Wettability and Temperature Difference. American Chemical Society Langmuir: The Acs Journal of Surfaces and Colloids vol. 36, 456-464.  
  • Liu T, Yue S-Y, Ratnasingham S, Degousée T, Varsini P, Briscoe J, McLachlan MA, Hu M and Fenwick O (2019). Unusual Thermal Boundary Resistance in Halide Perovskites: A Way To Tune Ultralow Thermal Conductivity for Thermoelectrics. American Chemical Society Acs Applied Materials and Interfaces 
  • Kundanati L, Guarino R and Pugno NM (2019). Stag Beetle Elytra: Localized Shape Retention and Puncture/Wear Resistance. Mdpi Ag Insects vol. 10 (12) 
  • Ke D, Jiang A, Biesuz M, Bortolotti M, Taveri G, Wang X, Xu M, Li J, Feng Y, Hu C and Grasso S (2019). Ultra-low energy joining: An invisible strong bond at room temperature. Elsevier Journal of The European Ceramic Society vol. 39 (16), 5358-5363.  
  • Liu M, Kinloch IA, Young RJ and Papageorgiou DG (2019). Modelling mechanical percolation in graphene-reinforced elastomer nanocomposites. Elsevier Composites Part B Engineering vol. 178 
  • Biesuz M, Saunders TG, Grasso S, Speranza G, Sorarù GD, Campostrini R, Sglavo VM and Reece MJ (2019). Flash joining of conductive ceramics in a few seconds by flash spark plasma sintering. Elsevier Journal of The European Ceramic Society vol. 39 (15), 4664-4672.  
  • Ambrosi RM, Williams H, Watkinson EJ, Barco A, Mesalam R, Crawford T, Bicknell C, Samara-Ratna P, Vernon D, Bannister N, Ross D, Sykes J, Perkinson M-C, Burgess C, Stroud C, Gibson S, Godfrey A, Slater RG, Reece MJ, Chen K, Simpson K, Tuley R, Sarsfield M, Tinsley TP, Stephenson K, Freis D, Vigier J-F, Konings RJM, Fongarland C and Libessart M (2019). European Radioisotope Thermoelectric Generators (RTGs) and Radioisotope Heater Units (RHUs) for Space Science and Exploration. Springer Nature Space Science Reviews vol. 215 (8) 
  • Dellaquila A, Greco G, Campodoni E, Mazzocchi M, Mazzolai B, Tampieri A, Pugno NM and Sandri M (2019). Optimized production of a high-performance hybrid biomaterial: biomineralized spider silk for bone tissue engineering. Journal of Applied Polymer Science vol. 137 (22) 
  • Williams JA, Windmill JFC, TANNER KE, Riddell JS and Coupaud S (2019). Global and site-specific analysis of bone in a rat model of spinal cord injury-induced osteoporosis. Elsevier Bone Reports 
  • Jorge AB, Jervis R, Periasamy AP, Qiao M, Feng J, Tran LN and Titirici M (2019). 3D Carbon Materials for Efficient Oxygen and Hydrogen Electrocatalysis. Wiley Advanced Energy Materials, 1902494-1902494.  
  • Brely L, Bosia F, Palumbo S, Fraldi M, Dhinojwala A and Pugno NM (2019). Competition between delamination and tearing in multiple peeling problems. Royal Society, The Journal of The Royal Society Interface vol. 16 (160) 
  • Ziefuss M, Karimi N, Ries F, Sadiki A and Mehdizadeh A (2019). Entropy Generation Assessment for Wall-Bounded Turbulent Shear Flows Based on Reynolds Analogy Assumptions. Mdpi Entropy vol. 21 (12) 
  • Biesuz M, Taveri G, Duff AI, Olevsky E, Zhu D, Hu C and Grasso S (2019). A theoretical analysis of cold sintering. Sage Publications Advances in Applied Ceramics vol. 119 (2), 75-89.  
  • Ahmed AA, Luo CJ, Perez-Garrido S, Browse CR, Thrasivoulou C, Stoyanov SD, Smoukov SK and Gout I (2019). Three-dimensional cancer cell culture in high-yield multiscale scaffolds by shear spinning. Wiley Biotechnology Progress vol. 35 (2) 
  • Dargaville S, Buchan AG, Smedley-Stevenson RP, Smith PN and Pain CC (2019). Scalable angular adaptivity for Boltzmann transport. Elsevier Bv Journal of Computational Physics, 109124-109124.  
  • Shi Z, Zhang Y, Zhang R, Lou Z, Qin M, Zhang P, Xu J, Gao F and Yan H (2019). Microstructure and thermoelectric performance of La‐doped (Ca0.9Ag0.1)3Co4O9/nano‐sized Ag composite ceramics. Wiley International Journal of Ceramic Engineering & Science vol. 2 (1), 7-16.  
  • Xi L, De Falco P, Barbieri E, Karunaratne A, Bentley L, Esapa CT, Davis GR, Terrill NJ, Cox RD, Pugno NM, Thakker RV, Weinkamer R, Wu WW, Fang DN and Gupta HS (2019). Reduction of fibrillar strain-rate sensitivity in steroid-induced osteoporosis linked to changes in mineralized fibrillar nanostructure. Elsevier Bone vol. 131 
  • Coathup D, Li Z, Zhu X, Yan H, Zhang R and Ye H (2019). Dielectric and ferroelectric properties of BTFCO thin films. Springer Nature Journal of Electroceramics vol. 43 (1-4), 92-95.  
  • Christodoulou L, Karimi N, Cammarano A, Paul M and Navarro-Martinez S (2019). State prediction of an entropy wave advecting through a turbulent channel flow. Cambridge University Press (Cup) Journal of Fluid Mechanics vol. 882 
  • Jorge Sobrido A, Jervis R, Crespo Ribadeneyra M, Grogan L, Au H, Schlee P, Herou S, Neville T, Cullen P, Kok M, Hosseinaei O, Tomani P, Titirici M, Brett D and Shearing P (2019). Lignin-derived electrospun freestanding carbons as alternative electrodes for redox flow batteries. Elsevier Carbon 
  • Rogalski JJ, Zhang H, Yao J, Bastiaansen CWM and Peijs T (2019). High-modulus rotary jet spun co-polyimide nanofibers and their composites. Taylor & Francis Nanocomposites vol. 6 (1), 1-11.  
  • Calusi B, Tramacere F, Gualtieri S, Pugno NM and Mazzolai B (2019). Plant root penetration and growth as a mechanical inclusion problem. Elsevier International Journal of Non-Linear Mechanics vol. 120 
  • Heenan TMM, Tan C, Jervis R, Lu X, Brett DJL and Shearing PR (2019). Representative resolution analysis for X-ray CT: A Solid oxide fuel cell case study. Elsevier Chemical Engineering Science X vol. 4 
  • El-Fallah GMAM, Ooi SW and Bhadeshia HKDH (2019). Effect of nickel aluminide on the bainite transformation in a Fe-0.45C–13Ni–3Al–4Co steel, and associated properties. Elsevier Materials Science and Engineering A vol. 767 
  • Tabaei A, Sadeghi S, Hosseinzadeh S, Bidabadi M, Xiong Q and Karimi N (2019). A simplified mathematical study of thermochemical preparation of particle oxide under counterflow configuration for use in biomedical applications. Springer Nature Journal of Thermal Analysis and Calorimetry vol. 139 (4), 2769-2779.  
  • Vallés C, Papageorgiou DG, Lin F, Li Z, Spencer BF, Young RJ and Kinloch IA (2019). PMMA-grafted graphene nanoplatelets to reinforce the mechanical and thermal properties of PMMA composites. Elsevier Carbon vol. 157, 750-760.  
  • Jiang Z, Karan S and Livingston AG (2019). Membrane Fouling: Does Microscale Roughness Matter? American Chemical Society (Acs) Industrial & Engineering Chemistry Research vol. 59 (12), 5424-5431.  
  • Li D, Wu L, Qu F, Ribadeneyra MC, Tu G and Gautrot J (2019). Core-independent approach for polymer brush-functionalised nanomaterials with a fluorescent tag for RNA delivery. Royal Society of Chemistry Chemical Communications vol. 55 (94), 14166-14169.  
  • Meng N, Ren X, Santagiuliana G, Ventura L, Zhang H, Wu J, Yan H, Reece MJ and Bilotti E (2019). Ultrahigh β-phase content poly(vinylidene fluoride) with relaxor-like ferroelectricity for high energy density capacitors. Springer Nature Nature Communications vol. 10 (1) 
  • Salussolia G, Barbieri E, Pugno NM and Botto L (2019). Micromechanics of liquid-phase exfoliation of a layered 2D material: A hydrodynamic peeling model. Elsevier Journal of The Mechanics and Physics of Solids vol. 134 
  • Iwase M, Liang Y, Masuda Y, Morimoto M, Matsuoka T, Boek ES, Kaito Y and Nakagawa K (2019). Application of a Digital Oil Model to Solvent-Based Enhanced Oil Recovery of Heavy Crude Oil. American Chemical Society Energy and Fuels 
  • Zhou B, Das A, Kappers M, Oliver R, Humphreys C and Krause S (2019). InGaN as a substrate for AC photoelectrochemical imaging. Mdpi Sensors 
  • Valorosi F, De Meo E, Blanco-Varela T, Martorana B, Veca A, Pugno N, Kinloch IA, Anagnostopoulos G, Galiotis C, Bertocchi F, Gomez J, Treossi E, Young RJ and Palermo V (2019). Graphene and related materials in hierarchical fiber composites: Production techniques and key industrial benefits. Elsevier Composites Science and Technology vol. 185 
  • Griffiths JT, Rivarola FWR, Davis NJLK, Ahumada-Lazo R, Alanis JA, Parkinson P, Binks DJ, Fu WY, De La Pena F, Price MB, Howkins A, Boyd I, Humphreys CJ, Greenham NC and Ducati C (2019). Effect of Size on the Luminescent Efficiency of Perovskite Nanocrystals. American Chemical Society (Acs) Acs Applied Energy Materials vol. 2 (10), 6998-7004.  
  • Solano-Alvarez W, Gonzalez LF and Bhadeshia HKDH (2019). The effect of vanadium alloying on the wear resistance of pearlitic rails. Elsevier Wear vol. 436 
  • Lee S, Pugno NM and Ryu S (2019). Atomistic simulation study on the crack growth stability of graphene under uniaxial tension and indentation. Meccanica vol. 54 (13), 1915-1926.  
  • Mousavi SM, Kamali R, Sotoudeh F, Pourabidi R, Karimi N and Jeung I-S (2019). A comprehensive investigation of acoustic power level in a moderate or intense low oxygen dilution in a jet-in-hot-coflow under various working conditions. Elsevier Aerospace Science and Technology vol. 93 
  • Jiang D, Ekren D, Azough F, Day SJ, Chen K, Mahajan A, Kepaptsoglou DM, Ramasse QM, Reece MJ and Freer R (2019). The structure and thermoelectric properties of tungsten bronze Ba6Ti2Nb8O30. Aip Publishing Journal of Applied Physics vol. 126 (12) 
  • Wang Y, Zhang Y, Terrill NJ, Barbieri E, Pugno NM and Gupta HS (2019). Matrix-induced pre-strain and mineralization-dependent interfibrillar shear transfer enable 3D fibrillar deformation in a biogenic armour. Elsevier Acta Biomaterialia 
  • Sun YW, Liu W, Hernandez I, Gonzalez J, Rodriguez F, Dunstan DJ and Humphreys C (2019). 3D strain in 2D materials: to what extent is monolayer graphene graphite? American Physical Society Physical Review Letters vol. 123, 135501-135501.  
  • Sprio S, Preti L, Montesi M, Panseri S, Adamiano A, Vandini A, Pugno NM and Tampieri A (2019). Surface Phenomena Enhancing the Antibacterial and Osteogenic Ability of Nanocrystalline Hydroxyapatite, Activated by Multiple-Ion Doping. American Chemical Society Acs Biomaterials Science and Engineering vol. 5 (11), 5947-5959.  
  • Calabrese L, Berardo A, De Rossi D, Gei M, Pugno NM and Fantoni G (2019). A soft robot structure with limbless resonant, stick and slip locomotion. Iop Publishing Smart Materials and Structures vol. 28 (10) 
  • Law JC, Headen TF, Jiménez-Serratos G, Boek ES, Murgich J and Müller EA (2019). Catalogue of Plausible Molecular Models for the Molecular Dynamics of Asphaltenes and Resins Obtained from Quantitative Molecular Representation. American Chemical Society (Acs) Energy & Fuels vol. 33 (10), 9779-9795.  
  • Liprandi D, Bosia F and Pugno NM (2019). A theoretical-numerical model for the peeling of elastic membranes. Journal of The Mechanics and Physics of Solids vol. 136 
  • Haas PA, Cholakova D, Denkov N, Goldstein RE and Smoukov SK (2019). Shape-shifting polyhedral droplets. American Physical Society Physical Review Research vol. 1 (2) 
  • Haas PA, Cholakova D, Denkov N, Goldstein RE and Smoukov SK (2019). Shape-Shifting Polyhedral Droplets. American Physical Society Physical Review Research 
  • Wan K, Taroni PJ, Liu Z, Liu Y, Tu Y, Santagiuliana G, Hsia I, Zhang H, Fenwick O, Krause S, Baxendale M, Schroeder BC and Bilotti E (2019). Flexible and Stretchable Self‐Powered Multi‐Sensors Based on the N‐Type Thermoelectric Response of Polyurethane/Na x (Ni‐ett) n Composites. Wiley Advanced Electronic Materials, 1900582-1900582.  
  • Yang Y, Greco G, Maniglio D, Mazzolai B, Migliaresi C, Pugno N and Motta A (2019). Spider (Linothele megatheloides) and silkworm (Bombyx mori) silks: Comparative physical and biological evaluation. Elsevier Materials Science and Engineering C: Materials For Biological Applications vol. 107 
  • Signetti S, Kang K, Pugno NM and Ryu S (2019). Atomistic modelling of the hypervelocity dynamics of shock-compressed graphite and impacted graphene armours. Elsevier Computational Materials Science vol. 170 
  • Yilmaz P, Greenwood P, Meroni S, Troughton J, Novak P, Li X, Watson T and Briscoe J (2019). Self-adhesive electrode applied to ZnO nanorod-based piezoelectric nanogenerators. Iop Publishing Smart Materials and Structures vol. 28 (10) 
  • Luo H, Papaioannou N, Salvadori E, Roessler M, Ploenes G, van Eck ERH, Tanase L, Feng J, Sun Y, Yang Y, Danaie M, Sobrido ABJ, Sapelkin A, Durrant J, Dimitrov SD and Titirici M-M (2019). Manipulating the optical properties of carbon dots via fine tuning their structural features. Chemsuschem 
  • Wolff JO, Paterno GB, Liprandi D, Ramírez MJ, Bosia F, van der Meijden A, Michalik P, Smith HM, Jones BR, Ravelo AM, Pugno N and Herberstein ME (2019). Evolution of aerial spider webs coincided with repeated structural optimization of silk anchorages. Evolution vol. 73 (10), 2122-2134.  
  • Lin D-T, Yuan L-J, Zhang P-J, Zuo F, Plucknett K, Grasso S, Wang H-J and Lin H-T (2019). Densification and Phase Transformation in Multi-Layered Graded Si3N4–TiN Components Produced by Field-Assisted Sintering. Mdpi Materials vol. 12 (18) 
  • Hoxha A, Gillam DG, Bushby AJ, Agha A and Patel MP (2019). Layered double hydroxide fluoride release in dental applications: A systematic review. Mdpi Dentistry Journal vol. 7 (3) 
  • Saeed A, Karimi N, Hunt G and Torabi M (2019). On the influences of surface heat release and thermal radiation upon transport in catalytic porous microreactors—A novel porous-solid interface model. Elsevier Chemical Engineering and Processing - Process Intensification vol. 143 
  • Lu X, Bertei A, Heenan TMM, Wu Y, Brett DJ and Shearing PR (2019). Multi-length scale microstructural design of micro-tubular Solid Oxide Fuel Cells for optimised power density and mechanical robustness. Elsevier Journal of Power Sources vol. 434 
  • Orlovskaya N, Lugovy M, Verbylo D, Reece MJ, Graule T and Kuebler J (2019). High temperature stiffening of ferroelastic LaCoO3. Elsevier Journal of The European Ceramic Society vol. 39 (11), 3338-3343.  
  • Jiang A, Ke D, Xu L, Xu Q, Li J, Wei J, Hu C and Grasso S (2019). Cold Hydrostatic Sintering: From shaping to 3D printing. Elsevier Journal of Materiomics vol. 5 (3), 496-501.  
  • Li Y, Feng Z, Huang L, Essa K, Bilotti E, Zhang H, Peijs T and Hao L (2019). Additive manufacturing high performance graphene-based composites: A review. Elsevier Composites Part a Applied Science and Manufacturing vol. 124 
  • Achour A, Liu J, Peng P, Chen K, Reece M, Shaw C and Huang Z (2019). (Invited) Tuning of Catalytic Activity By Thermoelectric Effect. The Electrochemical Society Ecs Meeting Abstracts vol. MA2019-02 (26), 1204-1204.  
  • Zhang K and Jiang X (2019). Uncertainty quantification of fuel variability effects on high hydrogen content syngas combustion. Elsevier Bv Fuel vol. 257, 116111-116111.  
  • Mirbaha H, Nourpanah P, Scardi P, D'incau M, Greco G, Valentini L, Bon SB, Arbab S and Pugno N (2019). The impact of shear and elongational forces on structural formation of polyacrylonitrile/carbon nanotubes composite fibers during wet spinning process. Mdpi Materials vol. 12 (7) 
  • Corcos AR, Levato GA, Jiang Z, Evans AM, Livingston AG, Mariñas BJ and Dichtel WR (2019). Reducing the Pore Size of Covalent Organic Frameworks in Thin-Film Composite Membranes Enhances Solute Rejection. American Chemical Society (Acs) Acs Materials Letters vol. 1 (4), 440-446.  
  • Zhang H, Yang B, Yan H and Abrahams I (2019). Isolation of a ferroelectric intermediate phase in antiferroelectric dense sodium niobate ceramics. Elsevier Bv Acta Materialia vol. 179, 255-261.  
  • Mohamed MRA, Behraznia T, ALZAHRANI A, Bushby A and Hill R (2019). Machinability of Fluormica Glass-Ceramics of High Mica Volume Fraction., Editors: Richard T. Elsevier Journal of The European Ceramic Society 
  • Basma N, Cullen PL, Clancy AJ, Shaffer MSP, Skipper NT, Headen TF and Howard CA (2019). The liquid structure of the solvents dimethylformamide (DMF) and dimethylacetamide (DMA). Informa Uk Limited Molecular Physics vol. 117 (22), 3353-3363.  
  • Slavchov RI, Dimitrova IM and Menon A (2019). From the molecular quadrupole moment of oxygen to the macroscopic quadrupolarizability of its liquid phase. Aip Publishing Llc Journal of Chemical Physics vol. 151 (6) 
  • Qi W, Wang Y, Wu J, Hu Z, Jia C, Viola G, Zhang H and Yan H (2019). Relaxor behavior and photocatalytic properties of BaBi2Nb2O9. Wiley Journal of The American Ceramic Society 
  • He Q, Shahid M, Wu J, Jiao X, Eisner FD, Hodsden T, Fei Z, Anthopoulos TD, McNeill CR, Durrant JR and Heeney M (2019). Fused Cyclopentadithienothiophene Acceptor Enables Ultrahigh Short‐Circuit Current and High Efficiency >11% in As‐Cast Organic Solar Cells. Wiley Advanced Functional Materials vol. 29 (40) 
  • Saeed A, Karimi N, Hunt G, Torabi M and Mehdizadeh A (2019). Double-diffusive transport and thermodynamic analysis of a magnetic microreactor with non-Newtonian biofuel flow. Springer Nature Journal of Thermal Analysis and Calorimetry vol. 140 (3), 917-941.  
  • De Sousa JM, Bizao RA, Sousa Filho VP, Aguiar AL, Coluci VR, Pugno NM, Girao EC, Souza Filho AG and Galvao DS (2019). Elastic properties of graphyne-based nanotubes. Computational Materials Science vol. 170 
  • Fattahi A, Hosseinalipour SM, Karimi N, Saboohi Z and Ommi F (2019). On the response of a lean-premixed hydrogen combustor to acoustic and dissipative-dispersive entropy waves. Elsevier Energy vol. 180, 272-291.  
  • Dargaville S, Buchan AG, Smedley-Stevenson RP, Smith PN and Pain CC (2019). Angular adaptivity with spherical harmonics for Boltzmann transport. Elsevier Bv Journal of Computational Physics vol. 397, 108846-108846.  
  • Li Z, Young RJ, Papageorgiou DG, Kinloch IA, Zhao X, Yang C and Hao S (2019). Interfacial stress transfer in strain engineered wrinkled and folded graphene. Iop Publishing 2d Materials vol. 6 (4) 
  • Hua N, Xi H, Xu RJ, Chen Y and Wang HS (2019). Numerical simulation of multi-pass parallel flow condensers with liquid-vapor separation. International Journal of Heat and Mass Transfer vol. 142 
  • Pantano MF, Calusi B, Mazzolai B, Espinosa HD and Pugno NM (2019). Load sensor instability and optimization of MEMS-based tensile testing devices. Frontiers Frontiers in Materials vol. 6 
  • Csanádi T, Castle E, Reece MJ and Dusza J (2019). Strength enhancement and slip behaviour of high-entropy carbide grains during micro-compression. Springer Nature Scientific Reports vol. 9 (1) 
  • Cooper J, Hawkes A and Balcombe P (2019). Life cycle environmental impacts of natural gas drivetrains used in UK road freighting and impacts to UK emission targets. Elsevier Science of The Total Environment vol. 674, 482-493.  
  • Volpe R, Bermudez Menendez JM, Ramirez Reina T, Volpe M, Messineo A, Millan M and Titirici MM (2019). Free radicals formation on thermally decomposed biomass. Fuel vol. 255 
  • Zhao X, Papageorgiou DG, Zhu L, Ding F and Young RJ (2019). The strength of mechanically-exfoliated monolayer graphene deformed on a rigid polymer substrate. Royal Society of Chemistry Nanoscale vol. 11 (30), 14339-14353.  
  • Li G and Jiang X (2019). Effects of electrical parameters on the performance of a plasma swirler. Iop Publishing Physica Scripta vol. 94 (9), 095601-095601.  
  • Barr M, Volpe R and Kandiyoti R (2019). Influence of reactor design on product distributions from biomass pyrolysis. American Chemical Society (Acs) Acs Sustainable Chemistry & Engineering 
  • Gliozzi AS, Miniaci M, Krushynska AO, Morvan B, Scalerandi M, Pugno NM and Bosia F (2019). Proof of concept of a frequency-preserving and time-invariant metamaterial-based nonlinear acoustic diode. Springer Nature Scientific Reports vol. 9 (1) 
  • Wei HL, Bhadeshia HKDH, David SA and DebRoy T (2019). Harnessing the scientific synergy of welding and additive manufacturing. Sage Publications Science and Technology of Welding & Joining vol. 24 (5), 361-366.  
  • Escrivà-Cerdán C, Ooi SW, Joshi GR, Morana R, Bhadeshia HKDH and Akid R (2019). Effect of tempering heat treatment on the CO2 corrosion resistance of quench-hardened Cr-Mo low-alloy steels for oil and gas applications. Elsevier Corrosion Science vol. 154, 36-48.  
  • Bhadeshia HKDH, Chintha AR and Lenka S (2019). Critical Assessment 34: Are χ (Hägg), η and ϵ carbides transition-phases relative to cementite in steels? Sage Publications Materials Science and Technology vol. 35 (11), 1301-1305.  
  • Majasan JO, Iacoviello F, Cho JIS, Maier M, Lu X, Neville TP, Dedigama I, Shearing PR and Brett DJL (2019). Correlative study of microstructure and performance for porous transport layers in polymer electrolyte membrane water electrolysers by X-ray computed tomography and electrochemical characterization. Elsevier International Journal of Hydrogen Energy vol. 44 (36), 19519-19532.  
  • Lu X, Fernández MP, Bradley RS, Rawson SD, O'Brien M, Hornberger B, Leibowitz M, Tozzi G and Withers PJ (2019). Anisotropic crack propagation and deformation in dentin observed by four-dimensional X-ray nano-computed tomography. Elsevier Acta Biomaterialia vol. 96, 400-411.  
  • Consonni V, Briscoe J, Kärber E, Li X and Cossuet T (2019). ZnO nanowires for solar cells: a comprehensive review. Nanotechnology vol. 30 (36), 362001-362001.  
  • Lu T, Tian Y, Studer A, Narayanan N, Li Q, Withers R, Jin L, Mendez-González Y, Peláiz-Barranco A, Yu D, McIntyre GJ, Xu Z, Wei X, Yan H and Liu Y (2019). Symmetry-mode analysis for intuitive observation of structure–property relationships in the lead-free antiferroelectric (1−x)AgNbO3–xLiTaO3. International Union of Crystallography (Iucr) Iucrj vol. 6 (Pt 4), 740-750.  
  • Yang L, Yang J, Boek E, Sakai M and Pain C (2019). Image-based simulations of absolute permeability with massively parallel pseudo-compressible stabilised finite element solver. Springer Science and Business Media Llc Computational Geosciences 
  • Tang F, Zhu T, Fu W-Y, Oehler F, Zhang S, Griffiths JT, Humphreys C, Martin TL, Bagot PAJ, Moody MP, Patra SK, Schulz S, Dawson P, Church S, Jacobs J and Oliver RA (2019). Insight into the impact of atomic- and nano-scale indium distributions on the optical properties of InGaN/GaN quantum well structures grown on m-plane freestanding GaN substrates. Aip Publishing Journal of Applied Physics vol. 125 (22) 
  • Berardo A, Costagliola G, Ghio S, Boscardin M, Bosia F and Pugno NM (2019). An experimental-numerical study of the adhesive static and dynamic friction of micro-patterned soft polymer surfaces. Materials and Design vol. 181 
  • Buchan AG, Dargaville S and Pain CC (2019). A combined immersed body and adaptive mesh method for simulating neutron transport within complex structures. Elsevier Bv Annals of Nuclear Energy vol. 134, 88-100.  
  • Li Z, Qi W, Cao J, Li Y, Viola G, Jia C and Yan H (2019). Multiferroic properties of single phase Bi 3 NbTiO 9 based textured ceramics. Journal of Alloys and Compounds vol. 788, 701-704.  
  • Alizadeh R, Karimi N and Nourbakhsh A (2019). Effects of radiation and magnetic field on mixed convection stagnation-point flow over a cylinder in a porous medium under local thermal non-equilibrium. Springer Nature Journal of Thermal Analysis and Calorimetry vol. 140 (3), 1371-1391.  
  • Dragoman M, Ciobanu V, Shree S, Dragoman D, Braniste T, Raevschi S, Dinescu A, Sarua A, Mishra YK, Pugno N, Adelung R and Tiginyanu I (2019). Sensing up to 40 atm Using Pressure-Sensitive Aero-GaN. Physica Status Solidi - Rapid Research Letters vol. 13 (6) 
  • Crespo M, Santagiuliana G, Picot O, Portale G, Bilotti E and Gautrot JE (2019). Photo‐Responsive Graphene: A Photoaddressable Liquid Crystalline Phase Transition in Graphene Oxide Nanocomposites (Adv. Funct. Mater. 24/2019). Wiley Advanced Functional Materials vol. 29 (24) 
  • Poulopoulou N, Pipertzis A, Kasmi N, Bikiaris DN, Papageorgiou DG, Floudas G and Papageorgiou GZ (2019). Green polymeric materials: On the dynamic homogeneity and miscibility of furan-based polyester blends. Elsevier Polymer vol. 174, 187-199.  
  • Guthrie DGP, Torabi M and Karimi N (2019). Combined heat and mass transfer analyses in catalytic microreactors partially filled with porous material - The influences of nanofluid and different porous-fluid interface models. Elsevier International Journal of Thermal Sciences vol. 140, 96-113.  
  • Seel AG, Holzmann N, Imberti S, Bernasconi L, Edwards PP, Cullen PL, Howard CA and Skipper NT (2019). Solvation of Na– in the Sodide Solution, LiNa·10MeNH2. American Chemical Society (Acs) The Journal of Physical Chemistry B vol. 123 (25), 5337-5342.  
  • Gomari SR, Alizadeh R, Alizadeh A and Karimi N (2019). Generation of entropy during forced convection of heat in nanofluid stagnation-point flows over a cylinder embedded in porous media. Taylor & Francis Numerical Heat Transfer Part a Applications vol. 75 (10), 647-673.  
  • Kundanati L, D'Incau M, Bernardi M, Scardi P and Pugno NM (2019). A comparative study of the mechanical properties of a dinosaur and crocodile fossil teeth. J Mech Behav Biomed Mater vol. 97, 365-374.  
  • Torabi M, Karimi N, Ghiaasiaan M and Wongwises S (2019). Non-Equilibrium Thermodynamics of Micro Technologies. Mdpi Entropy vol. 21 (5) 
  • Isotta E, Fanciulli C, Pugno NM and Scardi P (2019). Effect of the order-disorder transition on the seebeck coefficient of nanostructured thermoelectric Cu2ZnSnS4. Nanomaterials vol. 9 (5) 
  • Chen C and JIANG X (2019). Transport property prediction and inhomogeneity analysis of supercritical n-Dodecane by molecular dynamics simulation. Elsevier Fuel vol. 244, 48-60.  
  • Lin Y, Tu W, Verpaalen RCP, Zhang H, Bastiaansen CWM and Peijs T (2019). Transparent, Lightweight, and High Strength Polyethylene Films by a Scalable Continuous Extrusion and Solid-State Drawing Process. Macromolecular Materials and Engineering 
  • Hales A and Jiang X (2019). Optimisation of low energy cooling through phase variation between adjacent piezoelectric fan blades. Elsevier International Journal of Heat and Mass Transfer vol. 139, 362-372.  
  • Carrasco-Pena A, Jordan R, Dieguez J, Coronado-Rodríguez A, Ozdemir VB, Kwok K, Orlovskaya N, Vazquez-Molina DA, Uribe-Romo FJ, Bolon A, Radovic M, Grasso S and Reece MJ (2019). Design and development of ring-on-ring jig for biaxial strength testing of brittle ceramic composite materials: ZrB2-30wt-%SiB6. Sage Publications Advances in Applied Ceramics vol. 118 (4), 159-168.  
  • Feng Z, Li Y, Xin C, Tang D, Xiong W and Zhang H (2019). Fabrication of Graphene-Reinforced Nanocomposites with Improved Fracture Toughness in Net Shape for Complex 3D Structures via Digital Light Processing. Mdpi C – Journal of Carbon Research vol. 5 (2) 
  • Terzopoulou Z, Tarani E, Kasmi N, Papadopoulos L, Chrissafis K, Papageorgiou DG, Papageorgiou GZ and Bikiaris DN (2019). Thermal Decomposition Kinetics and Mechanism of In-Situ Prepared Bio-based Poly(propylene 2,5-furan dicarboxylate)/Graphene Nanocomposites. Mdpi Molecules vol. 24 (9) 
  • Papageorgiou DG, Liu M, Li Z, Vallés C, Young RJ and Kinloch IA (2019). Hybrid poly(ether ether ketone) composites reinforced with a combination of carbon fibres and graphene nanoplatelets. Elsevier Composites Science and Technology vol. 175, 60-68.  
  • Biesuz M, Sedlák R, Saunders T, Kovalčíková A, Dusza J, Reece M, Zhu D, Hu C and Grasso S (2019). Flash spark plasma sintering of 3YSZ. Elsevier Journal of The European Ceramic Society vol. 39 (5), 1932-1937.  
  • Zhang Z, Fu S, Aversano F, Bortolotti M, Zhang H, Hu C and Grasso S (2019). Arc melting: a novel method to prepare homogeneous solid solutions of transition metal carbides (Zr, Ta, Hf). Elsevier Ceramics International vol. 45 (7), 9316-9319.  
  • Zhang H, Jayaseelan DD, Bogomol I, Reece MJ, Hu C, Grasso S and Lee WE (2019). A novel microstructural design to improve the oxidation resistance of ZrB2-SiC ultra-high temperature ceramics (UHTCs). Elsevier Journal of Alloys and Compounds vol. 785, 958-964.  
  • Gan Y, Li H, Jiang Z, Chen X, Luo Y, Tong Y, Shi Y and Jiang X (2019). An experimental investigation on the electrospray characteristics in a meso-scale system at different modes. Elsevier Experimental Thermal and Fluid Science vol. 106, 130-137.  
  • Christian GM, Schulz S, Hammersley S, Kappers MJ, Frentrup M, Humphreys CJ, Oliver RA and Dawson P (2019). Optical properties of c-Plane InGaN/GaN single quantum wells as a function of total electric field strength. Japanese Journal of Applied Physics vol. 58 
  • Massabuau FC-P, Horton MK, Pearce E, Hammersley S, Chen P, Zielinski MS, Weatherley TFK, Divitini G, Edwards PR, Kappers MJ, McAleese C, Moram MA, Humphreys CJ, Dawson P and Oliver RA (2019). Optical and structural properties of dislocations in InGaN. Aip Publishing Journal of Applied Physics vol. 125 (16) 
  • Shui H, Shi Q, Pugno NM, Chen Q and Li Z (2019). Effect of mechanical stimulation on the degradation of poly(lactic acid) scaffolds with different designed structures. Elsevier Journal of The Mechanical Behavior of Biomedical Materials vol. 96, 324-333.  
  • Signetti S, Chen X, Ke C and Pugno NM (2019). A numerical-experimental approach towards picomechanics and picotribology: The case study of defective carbon nanotubes bundles. Iop Publishing Journal of Physics D: Applied Physics vol. 52 (25) 
  • Valentini L, Bittolo Bon S, Tripathi M, Dalton A and Pugno NM (2019). Regenerated silk and carbon nanotubes dough as masterbatch for high content filled nanocomposites. Frontiers Media Frontiers in Materials vol. 6 
  • Isotta E, Pugno NM and Scardi P (2019). Nanostructured kesterite (Cu2ZnSnS4) for applications in thermoelectric devices. Cambridge University Press (Cup) Powder Diffraction vol. 34 (S1), S42-S47.  
  • FENWICK OJ, Cacialli F and Mauthoor S (2019). Mapping sub-surface structure of thin films in three dimensions with an optical near-field. Advanced Theory and Simulations 
  • Crespo M, Santagiuliana G, Picot O, Portale G, Bilotti E and Gautrot JE (2019). A Photoaddressable Liquid Crystalline Phase Transition in Graphene Oxide Nanocomposites. Wiley Advanced Functional Materials vol. 29 (24) 
  • Speller EM, Clarke AJ, Aristidou N, Wyatt MF, Francàs L, Fish G, Cha H, Lee HKH, Luke J, Wadsworth A, Evans AD, McCulloch I, Kim JS, Haque SA, Durrant JR, Dimitrov SD, Tsoi WC and Li Z (2019). Toward improved environmental stability of polymer: Fullerene and polymer:Nonfullerene organic solar cells: A common energetic origin of light- A nd oxygen-induced degradation. American Chemical Society Acs Energy Letters vol. 4 (4), 846-852.  
  • Watts MC, Picco L, Russell-Pavier FS, Cullen PL, Miller TS, Bartuś SP, Payton OD, Skipper NT, Tileli V and Howard CA (2019). Production of phosphorene nanoribbons. Nature Research Nature vol. 568 (7751), 216-220.  
  • Greco G, Pantano MF, Mazzolai B and Pugno NM (2019). Imaging and mechanical characterization of different junctions in spider orb webs. Sci Rep vol. 9 (1), 5776-5776.  
  • Weng Z, Song C, Xiong Z, Xue H, Sun W, Zhang Y, Yang B, Reece MJ and Yan H (2019). Microstructure and broadband dielectric properties of Zn 2 SiO 4 ceramics with nano-sized TiO 2 addition. Ceramics International 
  • Chintha AR, Valtonen K, Kuokkala V-T, Kundu S, Peet MJ and Bhadeshia HKDH (2019). Role of fracture toughness in impact-abrasion wear. Elsevier Wear vol. 428, 430-437.  
  • Wang Y, Daboczi M, Mesa CA, Ratnasingham SR, Kim JS, Durrant JR, Dunn S, Yan H and Briscoe J (2019). Bi 2 Fe 4 O 9 thin films as novel visible-light-active photoanodes for solar water splitting. Journal of Materials Chemistry A vol. 7 (16), 9537-9541.  
  • Shi Z, Gao F, Xu J, Zhu J, Zhang Y, Gao T, Qin M, Reece M and Yan H (2019). Two–step processing of thermoelectric (Ca 0.9 Ag 0.1 ) 3 Co 4 O 9 /nano–sized Ag composites with high ZT. Journal of The European Ceramic Society 
  • Yan Z, Zhang D, Zhou X, Qi H, Luo H, Zhou K, Abrahams I and Yan H (2019). Silver niobate based lead-free ceramics with high energy storage density. Journal of Materials Chemistry A vol. 7 (17), 10702-10711.  
  • Li T, Heenan TMM, Rabuni MF, Wang B, Farandos NM, Kelsall GH, Matras D, Tan C, Lu X, Jacques SDM, Brett DJL, Shearing PR, Di Michiel M, Beale AM, Vamvakeros A and Li K (2019). Design of next-generation ceramic fuel cells and real-time characterization with synchrotron X-ray diffraction computed tomography. Nature Research Nature Communications vol. 10 (1) 
  • Li Z, Qi W, Cao J, Li Y, Viola G and Yan H (2019). Spark plasma sintering of grain-oriented Sr2Bi4Ti5O18 aurivillius phase ceramics. Elsevier Journal of Alloys and Compounds vol. 782, 6-9.  
  • Viola G, D’Isanto F, Koval V, Cempura G, Yan H, Smeacetto F and Salvo M (2019). Orthoenstatite to forsterite phase transformation in magnesium germanate ceramics. Elsevier Ceramics International vol. 45 (6), 7878-7884.  
  • Demirskyi D, Suzuki TS, Grasso S and Vasylkiv O (2019). Microstructure and flexural strength of hafnium diboride via flash and conventional spark plasma sintering. Elsevier Journal of The European Ceramic Society vol. 39 (4), 898-906.  
  • Csanádi T, Wehrs J, Grasso S, Reece M, Michler J and Dusza J (2019). Anomalous slip of ZrB2 ceramic grains during in-situ micropillar compression up to 500 °C. Elsevier International Journal of Refractory Metals and Hard Materials vol. 80, 270-276.  
  • Biesuz M, Fu S, Dong J, Jiang A, Ke D, Xu Q, Zhu D, Bortolotti M, Reece MJ, Hu C and Grasso S (2019). High entropy Sr((Zr0.94Y0.06)0.2Sn0.2Ti0.2Hf0.2Mn0.2)O3−x perovskite synthesis by reactive spark plasma sintering. Taylor & Francis Journal of Asian Ceramic Societies vol. 7 (2), 127-132.  
  • Cholakova D, Denkov N, Tcholakova S, Valkova Z and Smoukov SK (2019). Multilayer Formation in Self-Shaping Emulsion Droplets. American Chemical Society Langmuir 
  • Dreyer JAH, Slavchov RI, Rees EJ, Akroyd J, Salamanca M, Mosbach S and Kraft M (2019). Improved methodology for performing the inverse Abel transform of flame images for color ratio pyrometry. Optical Society of America Applied Optics vol. 58 (10), 2662-2670.  
  • Pantano MF, Iacob E, Picciotto A, Margesin B, Centeno A, Zurutuza A, Galiotis C, Pugno NM and Speranza G (2019). Investigation of charges-driven interaction between graphene and different SiO 2 surfaces. Carbon vol. 148, 336-343.  
  • JORGE SOBRIDO AB, Jervis R, Flox C, Vázquez-Galván J and Morante JR (2019). High-power nitrided TiO2 carbon felt as the negative electrode for all-vanadium redox flow batteries. Elsevier Carbon 
  • HALES A and JIANG X (2019). Geometric optimisation of piezoelectric fan arrays for low energy cooling. Elsevier International Journal of Heat and Mass Transfer vol. 137, 52-63.  
  • Poulopoulou N, Kasmi N, Siampani M, Terzopoulou ZN, Bikiaris DN, Achilias DS, Papageorgiou DG and Papageorgiou GZ (2019). Exploring Next-Generation Engineering Bioplastics: Poly(alkylene furanoate)/Poly(alkylene terephthalate) (PAF/PAT) Blends. Mdpi Polymers (Basel) vol. 11 (3) 
  • SMOUKOV S (2019). Rational Approach to Guest Confinement inside MOF Cavities for Low-Temperature Catalysis. Nature Research Nature Communications 
  • PU JH, SHENG Q, Sun J, WANG W and WANG H (2019). Dependence of nano-confined surface condensation on tangentially external force field. Elsevier Journal of Molecular Liquids 
  • LIN Y, Patel R, CAO J, TU W, ZHANG H, BILOTTI E, BASTIAANSEN C and PEIJS AA (2019). Glass-like transparent high strength polyethylene films by tuning drawing temperature. Elsevier Polymer vol. 171, 180-191.  
  • Eisner FD, Azzouzi M, Fei Z, HOU X, Anthopoulos TD, DENNIS TJS, Heeney M and Nelson J (2019). Hybridization of Local Exciton and Charge-Transfer States Reduces Non-Radiative Voltage Losses in Organic Solar Cells. American Chemical Society Journal of The American Chemical Society 
  • Collaborators GN, Feigin VL, Nichols E, Alam T, Bannick MS, Beghi E, Blake N, Culpepper WJ, Dorsey ER, Elbaz A, Ellenbogen RG, Fisher JL, Fitzmaurice C, Giussani G, Glennie L, James SL, Johnson CO, Kassebaum NJ, Logroscino G, Marin B, Mountjoy-Venning WC, Nguyen M, Ofori-Asenso R, Patel AP, Piccininni M, Roth GA, Steiner TJ, Stovner LJ, Szoeke CEI and Theadom A (2019). Global, regional, and national burden of neurological disorders, 1990–2016: a systematic analysis for the Global Burden of Disease Study 2016. Elsevier The Lancet Neurology vol. 18 (5), 459-480.  
  • Xu M, Pradhan S, Agostinacchio F, Pal RK, Greco G, Mazzolai B, Pugno NM, Motta A and Yadavalli VK (2019). Easy, Scalable, Robust, Micropatterned Silk Fibroin Cell Substrates. Advanced Materials Interfaces vol. 6 (8) 
  • Miniaci M, Mazzotti M, Radzieński M, Kudela P, Kherraz N, Bosia F, Pugno NM and Ostachowicz W (2019). Application of a laser-based time reversal algorithm for impact localization in a stiffened aluminum plate. Frontiers in Materials vol. 6 
  • Collaborators GS, Johnson CO, Nguyen M, Roth GA, Nichols E, Alam T, Abate D, Abd-Allah F, Abdelalim A, Abraha HN, Abu-Rmeileh NM, Adebayo OM, Adeoye AM, Agarwal G, Agrawal S, Aichour AN, Aichour I, Aichour MTE, Alahdab F, Ali R, Alvis-Guzman N, Anber NH, Anjomshoa M, Arabloo J, Arauz A, Ärnlöv J, Arora A, Awasthi A, Banach M and Barboza MA (2019). Global, regional, and national burden of stroke, 1990–2016: a systematic analysis for the Global Burden of Disease Study 2016. Elsevier The Lancet Neurology vol. 18 (5), 439-458.  
  • BUCHAN AG (2019). An angular reduced order model for radiative transfer in non grey media. Elsevier Journal of Quantitative Spectroscopy and Radiative Transfer 
  • Kang Y, Chaoli W, Youbei Q, Junwei G, ZHANG H, Ton P, Jie K, Guangchang Z and Xuetao S (2019). Tissue-Engineered Trachea Consisting of Electrospun Patterned sc-PLA/GO-g-IL Fibrous Membranes with Antibacterial Property and 3D-Printed Skeletons with Elasticity. American Chemical Society Biomacromolecules 
  • Crow DJG, Balcombe P, Brandon N and Hawkes AD (2019). Assessing the impact of future greenhouse gas emissions from natural gas production. Elsevier Science of The Total Environment vol. 668, 1242-1258.  
  • Masters RC, Stehling N, Abrams KJ, Kumar V, Azzolini M, Pugno NM, Dapor M, Huber A, Schäfer P, Lidzey DG and Rodenburg C (2019). Mapping Polymer Molecular Order in the SEM with Secondary Electron Hyperspectral Imaging. Advanced Science vol. 6 (5) 
  • Mehanna YA, Upton RL and Crick CR (2019). Highly rough surface coatings via the ambient temperature deposition of thermosetting polymers. Royal Society of Chemistry Journal of Materials Chemistry A vol. 7 (13), 7333-7337.  
  • Alizadeh R, Karimi N, Mehdizadeh A and Nourbakhsh A (2019). Analysis of transport from cylindrical surfaces subject to catalytic reactions and non-uniform impinging flows in porous media. Springer Nature Journal of Thermal Analysis and Calorimetry vol. 138 (1), 659-678.  
  • Biesuz M, Dong J, Fu S, Liu Y, Zhang H, Zhu D, Hu C and Grasso S (2019). Thermally-insulated flash sintering. Elsevier Scripta Materialia vol. 162, 99-102.  
  • Kasmi N, Poulopoulou N, Terzopoulou Z, Papageorgiou DG, Bikiaris DN and Papageorgiou GZ (2019). Sustainable thermoplastics from renewable resources: Thermal behavior of poly(1,4-cyclohexane dimethylene 2,5-furandicarboxylate). Elsevier European Polymer Journal vol. 112, 1-14.  
  • Guarino R, Goffredo S, Falini G and Pugno NM (2019). Mechanical properties of Chamelea gallina shells at different latitudes. J Mech Behav Biomed Mater vol. 94, 155-163.  
  • Ren X, Meng N, Yan H, Bilotti E and Reece MJ (2019). Remarkably enhanced polarisability and breakdown strength in PVDF-based interactive polymer blends for advanced energy storage applications. Polymer vol. 168, 246-254.  
  • Cui Y, Sun H, Briscoe J, Wilson R, Tarakina N, Dunn S and Pu Y (2019). Influence of ferroelectric dipole on the photocatalytic activity of heterostructured BaTiO3/α-Fe2O3. Nanotechnology 
  • Sultan Z, Graça I, Li Y, Lima S, Peeva LG, Kim D, Ebrahim MA, Rinaldi R and Livingston AG (2019). Membrane Fractionation of Liquors from Lignin‐First Biorefining. Wiley Chemsuschem vol. 12 (6), 1203-1212.  
  • Hunt G, Karimi N, Yadollahi B and Torabi M (2019). The effects of exothermic catalytic reactions upon combined transport of heat and mass in porous microreactors. Elsevier International Journal of Heat and Mass Transfer vol. 134, 1227-1249.  
  • Balcombe P, Brierley J, Lewis C, Skatvedt L, Speirs J, Hawkes A and Staffell I (2019). How to decarbonise international shipping: Options for fuels, technologies and policies. Energy Conversion and Management vol. 182, 72-88.  
  • Gucci F, D’Isanto F, Zhang R, Reece MJ, Smeacetto F and Salvo M (2019). Oxidation Protective Hybrid Coating for Thermoelectric Materials. Mdpi Materials vol. 12 (4) 
  • Li G, Jiang X, Zhu J, Yang J, Liu C, Mu Y and Xu G (2019). Combustion control using a lobed swirl injector and a plasma swirler. Applied Thermal Engineering vol. 152, 92-102.  
  • Azzolini M, Angelucci M, Cimino R, Larciprete R, Pugno NM, Taioli S and Dapor M (2019). Secondary electron emission and yield spectra of metals from Monte Carlo simulations and experiments. J Phys Condens Matter vol. 31 (5), 055901-055901.  
  • Staffell I, Scamman D, Velazquez Abad A, Balcombe P, Dodds PE, Ekins P, Shah N and Ward KR (2019). The role of hydrogen and fuel cells in the global energy system. Energy and Environmental Science vol. 12 (2), 463-491.  
  • Fallah GMAME and Bhadeshia HKDH (2019). Tensile behaviour of thermally-stable nanocrystalline bainitic-steels. Elsevier Materials Science and Engineering A vol. 746, 145-153.  
  • Shi O, Xu L, Jiang A, Xu Q, Xiao Y, Zhu D, Grasso S and Hu C (2019). Synthesis and oxidation resistance of MoAlB single crystals. Elsevier Ceramics International vol. 45 (2), 2446-2450.  
  • Kazemian Y, Rashidi S, Esfahani JA and Karimi N (2019). Simulation of conjugate radiation–forced convection heat transfer in a porous medium using the lattice Boltzmann method. Springer Nature Meccanica vol. 54 (3), 505-524.  
  • Sutardi T, Paul MC and Karimi N (2019). Investigation of coal particle gasification processes with application leading to underground coal gasification. Elsevier Fuel vol. 237, 1186-1202.  
  • Wu Y, Cho JIS, Lu X, Rasha L, Neville TP, Millichamp J, Ziesche R, Kardjilov N, Markötter H, Shearing P and Brett DJL (2019). Effect of compression on the water management of polymer electrolyte fuel cells: An in-operando neutron radiography study. Elsevier Journal of Power Sources vol. 412, 597-605.  
  • Baláž P, Hegedüs M, Reece M, Zhang R-Z, Su T, Škorvánek I, Briančin J, Baláž M, Mihálik M, Tešínsky M and Achimovičová M (2019). Mechanochemistry for Thermoelectrics: Nanobulk Cu6Fe2SnS8/Cu2FeSnS4 Composite Synthesized in an Industrial Mill. Springer Nature Journal of Electronic Materials vol. 48 (4), 1846-1856.  
  • Tan Y, Viola G, Koval V, Yu C, Mahajan A, Zhang J, Zhang H, Zhou X, Tarakina NV and Yan H (2019). On the origin of grain size effects in Ba(Ti0.96Sn0.04)O3 perovskite ceramics. Journal of The European Ceramic Society 
  • Wang L, Karimi N, Sutardi T and Paul MC (2019). Combustion Characteristics and Pollutant Emissions in Transient Oxy-Combustion of a Single Biomass Particle: A Numerical Study. American Chemical Society (Acs) Energy & Fuels vol. 33 (2), 1556-1569.  
  • PUGNO N and Valentini (2019). Bionicomposites. Royal Society of Chemistry Nanoscale vol. 11, 3102-3111.  
  • Schlee P, Herou S, Jervis R, Shearing PR, Brett DJL, Baker D, Hosseinaei O, Tomani P, Murshed MM, Li Y, Mostazo-López MJ, Cazorla-Amorós D, Jorge Sobrido AB and Titirici MM (2019). Free-standing supercapacitors from Kraft lignin nanofibers with remarkable volumetric energy density. Chemical Science vol. 10 (10), 2980-2988.  
  • Papangelo A, Guarino R, Pugno N and Ciavarella M (2019). On unified crack propagation laws. Engineering Fracture Mechanics vol. 207, 269-276.  
  • Bhadeshia HKDH (2019). Cementite. Sage Publications International Materials Reviews vol. 65 (1), 1-27.  
  • Minkov IL, Arabadzhieva D, Salama IE, Mileva E and Slavchov RI (2019). Barrier kinetics of adsorption-desorption of alcohol monolayers on water under constant surface tension. Soft Matter vol. 15 (8), 1730-1746.  
  • Dong R, Liu R, Gaffney PRJ, Schaepertoens M, Marchetti P, Williams CM, Chen R and Livingston AG (2019). Author Correction: Sequence-defined multifunctional polyethers via liquid-phase synthesis with molecular sieving. Springer Nature Nature Chemistry vol. 11 (2), 184-184.  
  • Kareem MM, Hodgkinson T, Salmeron Sanchez M, Dalby MJ and TANNER KE (2019). Hybrid Core-Shell Scaffolds for Bone Tissue Engineering. Iop Publishing Biomedical Materials vol. 14 
  • Qadir A, Sun YW, Liu W, Oppenheimer PG, Xu Y, Humphreys CJ and Dunstan DJ (2019). Effect of humidity on the interlayer interaction of bilayer graphene. Physical Review B vol. 99 (4) 
  • Zhao X, Papageorgiou DG, Zhu L, Ding F and Young RJ (2019). The strength of mechanically-exfoliated monolayer graphene deformed on a rigid polymer substrate. Royal Society of Chemistry (Rsc) Nanoscale vol. 11 (30), 14339-14353.  
  • Zhang R-Z and Reece MJ (2019). Review of high entropy ceramics: design, synthesis, structure and properties. Royal Society of Chemistry (Rsc) Journal of Materials Chemistry A vol. 7 (39), 22148-22162.  
  • Srinivasan B, Gellé A, Gucci F, Boussard-Pledel C, Fontaine B, Gautier R, Halet J-F, Reece MJ and Bureau B (2019). Realizing a stable high thermoelectric zT ∼ 2 over a broad temperature range in Ge 1−x−y Ga x Sb y Te via band engineering and hybrid flash-SPS processing. Royal Society of Chemistry (Rsc) Inorganic Chemistry Frontiers vol. 6 (1), 63-73.  
  • Tian Y, Jin L, Hu Q, Yu K, Zhuang Y, Viola G, Abrahams I, Xu Z, Wei X and Yan H (2019). Phase transitions in tantalum-modified silver niobate ceramics for high power energy storage. Royal Society of Chemistry (Rsc) Journal of Materials Chemistry A vol. 7 (2), 834-842.  
  • Herou S, Ribadeneyra MC, Madhu R, Araullo-Peters V, Jensen A, Schlee P and Titirici M (2019). Ordered mesoporous carbons from lignin: a new class of biobased electrodes for supercapacitors. Royal Society of Chemistry (Rsc) Green Chemistry vol. 21 (3), 550-559.  
  • Parkinson B, Balcombe P, Speirs JF, Hawkes AD and Hellgardt K (2019). Levelized cost of CO 2 mitigation from hydrogen production routes. Energy and Environmental Science vol. 12 (1), 19-40.  
  • Sun G, Shahid M, Fei Z, Xu S, Eisner FD, Anthopolous TD, McLachlan MA and Heeney M (2019). Highly-efficient semi-transparent organic solar cells utilising non-fullerene acceptors with optimised multilayer MoO 3 /Ag/MoO 3 electrodes. Royal Society of Chemistry (Rsc) Materials Chemistry Frontiers vol. 3 (3), 450-455.  
  • Salvo M, Smeacetto F, D’Isanto F, Viola G, Demitri P, Gucci F and Reece MJ (2019). Glass-ceramic oxidation protection of higher manganese silicide thermoelectrics. Elsevier Journal of The European Ceramic Society vol. 39 (1), 66-71.  
  • Du B, Zhang R, Liu M, Chen K, Zhang H and Reece MJ (2019). Crystal structure and improved thermoelectric performance of iron stabilized cubic Cu 3 SbS 3 compound. Royal Society of Chemistry (Rsc) Journal of Materials Chemistry C vol. 7 (2), 394-404.  
  • Sun G, Shahid M, Fei Z, Xu S, Eisner FD, Anthopoulos TD, McLachlan MA and Heeney M (2019). Correction: Highly-efficient semi-transparent organic solar cells utilising non-fullerene acceptors with optimised multilayer MoO 3 /Ag/MoO 3 electrodes. Royal Society of Chemistry (Rsc) Materials Chemistry Frontiers vol. 3 (5), 955-955.  
  • Minkov IL, Arabadzhieva D, Salama IE, Mileva E and Slavchov RI (2019). Correction: Barrier kinetics of adsorption-desorption of alcohol monolayers on water under constant surface tension (Soft Matter (2019), DOI: 10.1039/c8sm02076k). Soft Matter vol. 15 (8), 1890-1890.  
  • Srivastava D, Norman C, Azough F, Ekren D, Chen K, Reece MJ, Kinloch IA and Freer R (2019). Anisotropy and enhancement of thermoelectric performance of Sr 0.8 La 0.067 Ti 0.8 Nb 0.2 O 3−δ ceramics by graphene additions. Royal Society of Chemistry (Rsc) Journal of Materials Chemistry A vol. 7 (42), 24602-24613.  
  • Yang L, Buchan A, Jones A, Smith P, Sakai M and Pain C (2019). Adaptive Modelling for Multiphase Flow Through Debris Bed With Boiling. Computers, Materials and Continua (Tech Science Press) International Conference On Computational & Experimental Engineering and Sciences vol. 22 (1), 95-95.  
  • Lu W, Wang X, Ma Y, Grasso S and Xu M (2019). A bi-layer buffer system AlN/Al 1−x In x N to enable the growth of high crystal quality Al 0.36 In 0.64 N thin films on Si (111). Royal Society of Chemistry (Rsc) Crystengcomm vol. 21 (35), 5211-5215.  
  • Buchan A, Jewer S and Navon IM (2019). A Reduced Order Model for the Fast Predictions of Reactivity and Neutron Distributions within Reactor Cores. Computers, Materials and Continua (Tech Science Press) International Conference On Computational & Experimental Engineering and Sciences vol. 22 (4), 179-179.  
  • Daemi SR, Lu X, Sykes D, Behnsen J, Tan C, Palacios-Padros A, Cookson J, Petrucco E, Withers PJ, Brett DJL and Shearing PR (2019). 4D visualisation of in situ nano-compression of Li-ion cathode materials to mimic early stage calendering. Royal Society of Chemistry (Rsc) Materials Horizons vol. 6 (3), 612-617.