Centre for Sustainable Engineering


   2021   |   2020   |   2019   |   2018   |   2017   |   2016   |   2015   |   2014   |   2013   |   2012   |   2011   
  • Costagliola G, Bosia F and Pugno NM (2016). Static and dynamic friction of hierarchical surfaces. Physical Review E vol. 94 (6)
  • Zhang H, Liu Y, Huang M, Bilotti E and Peijs T (2016). Dissolvable thermoplastic interleaves for carbon nanotube localization in carbon/epoxy laminates with integrated damage sensing capabilities. Sage Publications Structural Health Monitoring vol. 17 (1), 59-66.
  • CATTELL MJ, Theocharopoulos A, Bushby AJ, P’ng KMY, TANNER KE and wilson RW (2016). Interfacial modulus mapping of layered dental ceramics using nanoindentation., Editors: Kim SH. Journal of Advanced Prosthodontics vol. 8 (6), 479-488.
  • Novikov SV, Staddon CR, Sahonta SL, Oliver RA, Humphreys CJ and Foxon CT (2016). Growth of free-standing bulk wurtzite AlxGa1−xN layers by molecular beam epitaxy using a highly efficient RF plasma source. Journal of Crystal Growth vol. 456, 151-154.
  • VOLPE R, Volpe M, Fiori L and Messineo A (2016). Upgrading of Olive Tree Trimmings Residue as Biofuel by Hydrothermal Carbonization and Torrefaction: a Comparative Study. Italian Association of Chemical Engineering - Aidic Chemical Engineering Transactions vol. 50, 13-13.
  • Papageorgiou DG, Kinloch IA and Young RJ (2016). Hybrid multifunctional graphene/glass-fibre polypropylene composites. Composites Science and Technology vol. 137, 44-51.
  • Yu M, Grasso S, Mckinnon R, Saunders T and Reece MJ (2016). Review of flash sintering: materials, mechanisms and modelling. Taylor & Francis Advances in Applied Ceramics vol. 116 (1), 24-60.
  • Chen K, Du B, Bonini N, Weber C, Yan H and Reece MJ (2016). Theory-Guided Synthesis of an Eco-Friendly and Low-Cost Copper Based Sulfide Thermoelectric Material. Journal of Physical Chemistry C vol. 120 (48), 27135-27140.
  • Zhu T, Gachet D, Tang F, Fu WY, Oehler F, Kappers MJ, Dawson P, Humphreys CJ and Oliver RA (2016). Local carrier recombination and associated dynamics in m-plane InGaN/GaN quantum wells probed by picosecond cathodoluminescence. Applied Physics Letters vol. 109 (23)
  • Bhadeshia HKDH (2016). Some difficulties in the theory of diffusion-controlled growth in substitutionally alloyed steels. Current Opinion in Solid State and Materials Science vol. 20 (6), 396-400.
  • Silva R, Singh R, Sarker B, Papageorgiou DG, Juhasz JA, Roether JA, Cicha I, Kaschta J, Schubert DW, Chrissafis K, Detsch R and Boccaccini AR (2016). Soft-matrices based on silk fibroin and alginate for tissue engineering. International Journal of Biological Macromolecules vol. 93, 1420-1431.
  • Solano-Alvarez W, Pickering EJ, Peet MJ, Moore KL, Jaiswal J, Bevan A and Bhadeshia HKDH (2016). Soft novel form of white-etching matter and ductile failure of carbide-free bainitic steels under rolling contact stresses. Acta Materialia vol. 121, 215-226.
  • Tatarko P, Casalegno V, Hu C, Salvo M, Ferraris M and Reece MJ (2016). Joining of CVD-SiC coated and uncoated fibre reinforced ceramic matrix composites with pre-sintered Ti3SiC2 MAX phase using Spark Plasma Sintering. Journal of The European Ceramic Society vol. 36 (16), 3957-3967.
  • Cedillos-Barraza O, Manara D, Boboridis K, Watkins T, Grasso S, Jayaseelan DD, Konings RJM, Reece MJ and Lee WE (2016). Investigating the highest melting temperature materials: A laser melting study of the TaC-HfC system. Sci Rep vol. 6, 37962-37962.
  • Hibberd MT, Frey V, Spencer BF, Mitchell PW, Dawson P, Kappers MJ, Oliver RA, Humphreys CJ and Graham DM (2016). Dielectric response of wurtzite gallium nitride in the terahertz frequency range. Solid State Communications vol. 247, 68-71.
  • Kim D, Pugno NM and Ryu S (2016). Wetting theory for small droplets on textured solid surfaces. Macmillan Publishers Limited, Part of Springer Nature Sci Rep vol. 6, 37813-37813.
  • Aman A, Jordan R, Chen Y, Stadelmann R, Lugovy M, Orlovskaya N, Payzant EA, dela Cruz C, Reece MJ, Graule T and Kuebler J (2016). Non-congruence of high-temperature mechanical and structural behaviors of LaCoO3 based perovskites. Journal of The European Ceramic Society vol. 37 (4), 1563-1576.
  • Tatarko P, Chlup Z, Mahajan A, Casalegno V, Saunders TG, Dlouhý I and Reece MJ (2016). High temperature properties of the monolithic CVD β-SiC materials joined with a pre-sintered MAX phase Ti3SiC2 interlayer via solid-state diffusion bonding. Journal of The European Ceramic Society vol. 37 (4), 1205-1216.
  • Schulz S, Tanner DSP, O'Reilly EP, Caro MA, Tang F, Griffiths JT, Oehler F, Kappers MJ, Oliver RA, Humphreys CJ, Sutherland D, Davies MJ and Dawson P (2016). Theoretical and experimental analysis of the photoluminescence and photoluminescence excitation spectroscopy spectra of m -plane InGaN/GaN quantum wells. Applied Physics Letters vol. 109 (22)
  • Broseghini M, D’Incau M, Gelisio L, Pugno NM and Scardi P (2016). Homogeneity of ball milled ceramic powders: Effect of jar shape and milling conditions. Data in Brief vol. 10, 186-191.
  • Albaaji AJ, CASTLE E, Reece MJ, Hall JP and Evans SL (2016). Mechanical and magnetic properties of spark plasma sintered soft magnetic FeCo alloy reinforced by carbon nanotubes. Cambridge University Press (Cup): Stm Journals Journal of Materials Research
  • Misseroni D, Afferrante L, Carbone G and Pugno NM (2016). Non-linear double-peeling: Experimental vs. theoretical predictions. Journal of Adhesion, 1-12.
  • Chen Q, Gorb S, Kovalev A, Li Z and Pugno N (2016). An analytical hierarchical model explaining the robustness and flaw-tolerance of the interlocking barb-barbule structure of bird feathers. Epl vol. 116 (2)
  • Nakayama Y, Slavchov RI, Bavi N and Martinac B (2016). Energy of Liposome Patch Adhesion to the Pipet Glass Determined by Confocal Fluorescence Microscopy. Journal of Physical Chemistry Letters vol. 7 (22), 4530-4534.
  • Fu TR, Tian JB and WANG HS (2016). Apparent emissivity of combustion soot aggregate coating at high temperature. American Society of Mechanical Engineers (Asme) Journal of Heat Transfer: Transactions of The Asme
  • Kundys D, Sutherland D, Davies MJ, Oehler F, Griffiths J, Dawson P, Kappers MJ, Humphreys CJ, Schulz S, Tang F and Oliver RA (2016). A study of the optical and polarisation properties of InGaN/GaN multiple quantum wells grown on a-plane and m-plane GaN substrates. Sci Technol Adv Mater vol. 17 (1), 736-743.
  • Barbieri E, Ongaro F and Pugno NM (2016). A J-integral-based arc-length solver for brittle and ductile crack propagation in finite deformation-finite strain hyperelastic solids with an application to graphene kirigami. Computer Methods in Applied Mechanics and Engineering
  • JORGE SOBRIDO AB, Mansor N, Miller TS, Dedigama I, Jingjin J, Brazdova V, Mattevi C, Gibbs C, Hodgson D, Shearing PR, Howard CA, Cora F, Shaffer M, Brett DJL and McMillan PF (2016). Graphitic Carbon Nitride as a Catalyst Support in Fuel Cells and Electrolyzers. Electrochimica Acta
  • Torabi M, Dickson C and Karimi N (2016). Theoretical investigation of entropy generation and heat transfer by forced convection of copper-water nanofluid in a porous channel - Local thermal non-equilibrium and partial filling effects. Powder Technology vol. 301, 234-254.
  • Patterson BM, Cordes NL, Henderson K, Mertens JCE, Clarke AJ, Hornberger B, Merkle A, Etchin S, Tkachuk A, Leibowitz M, Trapp D, Qiu W, Zhang B, Bale H, Lu X, Hartwell R, Withers PJ and Bradley RS (2016). In Situ Laboratory-Based Transmission X-Ray Microscopy and Tomography of Material Deformation at the Nanoscale. Experimental Mechanics vol. 56 (9), 1585-1597.
  • Formia A, Irico S, Bertola F, Canonico F, Antonaci P, Pugno NM and Tulliani JM (2016). Experimental analysis of self-healing cement-based materials incorporating extruded cementitious hollow tubes. Journal of Intelligent Material Systems and Structures vol. 27 (19), 2633-2652.
  • Stadelmann R, Lugovy M, Orlovskaya N, Mchaffey P, Radovic M, Sglavo VM, Grasso S and Reece MJ (2016). Erratum: Corrigendum to “Mechanical properties and residual stresses in ZrB2–SiC spark plasma sintered ceramic composites” (J. Eur. Ceram. Soc. (2016) 36(7) (1527–1537)). Journal of The European Ceramic Society vol. 36 (14), 3545-3545.
  • Fraldi M, Cugno A, Carotenuto AR, Cutolo A, Pugno NM and Deseri L (2016). Small-on-Large Fractional Derivative–Based Single-Cell Model Incorporating Cytoskeleton Prestretch. Journal of Engineering Mechanics, D4016001-D4016001.
  • Griffiths JT, Zhang S, Lhuillier J, Zhu D, Fu WY, Howkins A, Boyd I, Stowe D, Wallis DJ, Humphreys CJ and Oliver RA (2016). Nano-cathodoluminescence reveals the effect of electron damage on the optical properties of nitride optoelectronics and the damage threshold. Journal of Applied Physics vol. 120 (16)
  • De Marchis M, Milici B, Volpe R and Messineo A (2016). Energy Saving in Water Distribution Network through Pump as Turbine Generators: Economic and Environmental Analysis. Energies vol. 9 (11), 877-877.
  • Shah SM, Crawshaw JP and Boek ES (2016). Three-dimensional imaging of porous media using confocal laser scanning microscopy. Wiley Journal of Microscopy vol. 265 (2), 261-271.
  • Gray F, Cen J and Boek ES (2016). Simulation of dissolution in porous media in three dimensions with lattice Boltzmann, finite-volume, and surface-rescaling methods. Phys Rev E vol. 94 (4-1), 043320-043320.
  • Krushynska AO, Miniaci M, Bosia F and Pugno NM (2016). Coupling local resonance with Bragg band gaps in single-phase mechanical metamaterials. Extreme Mechanics Letters vol. 12, 30-36.
  • Luo Y, Gan Y and Jiang X (2016). Investigation of the effect of DC electric field on a small ethanol diffusion flame. Fuel vol. 188, 621-627.
  • Pedrielli A, Taioli S, Garberoglio G and Pugno NM (2016). Designing graphene based nanofoams with nonlinear auxetic and anisotropic mechanical properties under tension or compression. Carbon vol. 111, 796-806.
  • Peeva L, Burgal JDS, Heckenast Z, Brazy F, Cazenave F and Livingston A (2016). Continuous Consecutive Reactions with Inter-Reaction Solvent Exchange by Membrane Separation. Wiley Angewandte Chemie International Edition vol. 55 (43), 13576-13579.
  • Ross PD, Guy J, Selfridge J, Kamal B, Bahey N, Tanner KE, Gillingwater TH, Jones RA, Loughrey CM, McCarroll CS, Bailey MES, Bird A and Cobb S (2016). Exclusive expression of MeCP2 in the nervous system distinguishes between brain and peripheral Rett syndrome-like phenotypes. Human Molecular Genetics vol. 25 (20), 4389-4404.
  • Jiang Q, Yang J, Xin J, Zhou Z, Zhang D and Yan H (2016). Carriers concentration tailoring and phonon scattering from n-type zinc oxide (ZnO) nanoinclusion in p- and n-type bismuth telluride (Bi2Te3): Leading to ultra low thermal conductivity and excellent thermoelectric properties. Journal of Alloys and Compounds vol. 694, 864-868.
  • Sun J and WANG HS (2016). On the early and developed stages of surface condensation: competition mechanism between interfacial and condensate bulk thermal resistances. Nature Publishing Group: Open Access Journals - Option C Scientific Reports vol. 6
  • Briscoe J and Dunn S (2016). The Future of Using Earth-Abundant Elements in Counter Electrodes for Dye-Sensitized Solar Cells. Adv Mater vol. 28 (20), 3802-3813.
  • Spagni A, Berardo A, Marchetto D, Gualtieri E, Pugno NM and Valeri S (2016). Friction of rough surfaces on ice: Experiments and modeling. Wear vol. 368-369, 258-266.
  • Papageorgiou GZ, Papageorgiou DG, Terzopoulou Z and Bikiaris DN (2016). Production of bio-based 2,5-furan dicarboxylate polyesters: Recent progress and critical aspects in their synthesis and thermal properties. European Polymer Journal vol. 83, 202-229.
  • Favata A, Micheletti A, Podio-Guidugli P and Pugno NM (2016). Geometry and Self-stress of Single-Wall Carbon Nanotubes and Graphene via a Discrete Model Based on a 2nd-Generation REBO Potential. Journal of Elasticity vol. 125 (1), 1-37.
  • Tanner KE, Svensson I, Samuelsson F and Flivik G (2016). Finite element study of the acetabulum in cemented hip arthroplasty investigating retention or removal of the subchondral bone plate. Biomedizinische Technik vol. 61 (5), 525-536.
  • Tian T, Blanco E, Smoukov SK, Velev OD and Velikov KP (2016). Dissolution behaviour of ferric pyrophosphate and its mixtures with soluble pyrophosphates: Potential strategy for increasing iron bioavailability. Food Chemistry vol. 208, 97-102.
  • Li S, Zheng Y, Mira D, Zhu M and Jiang X (2016). A Large-Eddy Simulation–Linear-Eddy Model Study of Preferential Diffusion Processes in a Partially Premixed Swirling Combustor With Synthesis Gases. Journal of Engineering For Gas Turbines and Power vol. 139 (3), 031501-031501.
  • Kundanati L, Singh SK, Mandal BB, Murthy TG, Gundiah N and Pugno NM (2016). Fabrication and mechanical characterization of hydrogel infused network silk scaffolds. International Journal of Molecular Sciences vol. 17 (10)
  • Hu R, Crawshaw JP, Trusler JPM and Boek ES (2016). Rheology and Phase Behavior of Carbon Dioxide and Crude Oil Mixtures. American Chemical Society Energy and Fuels vol. 31 (6), 5776-5784.
  • Eshraghi I, Jalali SK and Pugno NM (2016). Imperfection sensitivity of nonlinear vibration of curved single-walled carbon nanotubes based on nonlocal timoshenko beam theory. Materials vol. 9 (9)
  • Eshraghi I, Jalali S and Pugno NM (2016). Imperfection Sensitivity of Nonlinear Vibration of Curved Single-Walled Carbon Nanotubes Based on Nonlocal Timoshenko Beam Theory. Mdpi Materials
  • Li Y, Zhang H, Crespo M, Porwal H, Picot O, Santagiuliana G, Huang Z, Barbieri E, Pugno NM, Peijs T and Bilotti E (2016). In Situ Exfoliation of Graphene in Epoxy Resins: A Facile Strategy to Efficient and Large Scale Graphene Nanocomposites. Acs Appl Mater Interfaces vol. 8 (36), 24112-24122.
  • Li Z, Ma J, Gao Z, Viola G, Koval V, Mahajan A, Li X, Jia C, Nan C and Yan H (2016). Room temperature magnetoelectric coupling in intrinsic multiferroic Aurivillius phase textured ceramics. Royal Society of Chemistry Dalton Transactions vol. 45 (36), 14049-14052.
  • Ongaro F, BARBIERI E and Pugno N (2016). The in-plane elastic properties of hierarchical composite cellular materials: synergy of hierarchy, material heterogeneity and cell topologies at different levels. Elsevier Mechanics of Materials
  • Peshkova TV, Minkov IL, Tsekov R and Slavchov RI (2016). Adsorption of Ions at Uncharged Insoluble Monolayers. Langmuir vol. 32 (35), 8858-8871.
  • Messineo A, Bonasera D, Volpe R, Messineo S and Marvuglia A (2016). Technical and Economical Assessment of Biomass Potential for Power Production: A Study in the South of Italy. Journal of Environmental Accounting and Management vol. 4 (3), 287-299.
  • Shah SM, Gray F, Crawshaw JP and Boek ES (2016). Micro-computed tomography pore-scale study of flow in porous media: Effect of voxel resolution. Advances in Water Resources vol. 95, 276-287.
  • Wang C, Wu D, Grasso S, Saunders T, Castle E, Yan H and Reece MJ (2016). Growth of SiC platelets using contactless flash technique. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of The Ceramic Society of Japan vol. 124 (9), 845-847.
  • Karimi N, McGrath S, Brown P, Weinkauff J and Dreizler A (2016). Generation of Adverse Pressure Gradient in the Circumferential Flashback of a Premixed Flame. Flow, Turbulence and Combustion vol. 97 (2), 663-687.
  • Meyer Q, Ashton S, Boillat P, Cochet M, Engebretsen E, Finegan DP, Lu X, Bailey JJ, Mansor N, Abdulaziz R, Taiwo OO, Jervis R, Torija S, Benson P, Foster S, Adcock P, Shearing PR and Brett DJL (2016). Effect of gas diffusion layer properties on water distribution across air-cooled, open-cathode polymer electrolyte fuel cells: A combined ex-situ X-ray tomography and in-operando neutron imaging study. Electrochimica Acta vol. 211, 478-487.
  • Cholakova D, Denkov N, Tcholakova S, Lesov I and Smoukov SK (2016). Control of drop shape transformations in cooled emulsions. Advances in Colloid and Interface Science vol. 235, 90-107.
  • Signetti S, Bosia F and Pugno NM (2016). Computational modeling of the mechanics of hierarchical materials. Mrs Bulletin vol. 41 (9), 694-699.
  • Ananthakumar S, Li X, Anderson A-L, Yilmaz P, Dunn S, Babu SM and Briscoe J (2016). Photo-enhanced catalytic activity of spray-coated Cu2SnSe3 nanoparticle counter electrode for dye-sensitised solar cells. Physica Status Solidi-Rapid Research Letters vol. 10 (10), 739-744.
  • Anagnostopoulos G, Pappas PN, Li Z, Kinloch IA, Young RJ, Novoselov KS, Lu CY, Pugno N, Parthenios J, Galiotis C and Papagelis K (2016). Mechanical Stability of Flexible Graphene-Based Displays. Acs Applied Materials and Interfaces vol. 8 (34), 22605-22614.
  • Colquhoun R, Gadegaard N, Healy DM and Tanner KE (2016). Characterisation of CorGlaes(®) Pure 107 fibres for biomedical applications. J Mater Sci Mater Med vol. 27 (10), 149-149.
  • Hocker M, Maier P, Jerg L, Tischer I, Neusser G, Kranz C, Pristovsek M, Humphreys CJ, Leute RAR, Heinz D, Rettig O, Scholz F and Thonke K (2016). Determination of axial and lateral exciton diffusion length in GaN by electron energy dependent cathodoluminescence. Journal of Applied Physics vol. 120 (8)
  • Gray F, Cen J, Shah SM, Crawshaw JP and Boek ES (2016). Simulating dispersion in porous media and the influence of segmentation on stagnancy in carbonates. Elsevier Advances in Water Resources vol. 97, 1-10.
  • Miniaci M, Krushynska A, Bosia F and Pugno NM (2016). Large scale mechanical metamaterials as seismic shields. New Journal of Physics vol. 18 (8)
  • Wang T, Farajollahi M, Henke S, Zhu T, Bajpe SR, Sun S, Barnard JS, Lee JS, Madden JDW, Cheetham AK and Smoukov SK (2016). Functional conductive nanomaterials: Via polymerisation in nano-channels: PEDOT in a MOF. Materials Horizons vol. 4 (1), 64-71.
  • Tian Y, Jin L, Zhang H, Xu Z, Wei X, Politova ED, Stefanovich SY, Tarakina NV, Abrahams I and Yan H (2016). High energy density in silver niobate ceramics. Journal of Materials Chemistry A vol. 4 (44), 17279-17287.
  • Valentini L, Bon SB and Pugno NM (2016). Microorganism Nutrition Processes as a General Route for the Preparation of Bionic Nanocomposites Based on Intractable Polymers. Acs Appl Mater Interfaces vol. 8 (34), 22714-22720.
  • Miniaci M, Krushynska A, Movchan AB, Bosia F and Pugno NM (2016). Spider web-inspired acoustic metamaterials. Aip Publishing Applied Physics Letters vol. 109 (7), 109-109.
  • Wu X, Mahalingam S, Amir A, Porwal H, Reece MJ, Naglieri V, Colombo P and Edirisinghe M (2016). Novel Preparation, Microstructure, and Properties of Polyacrylonitrile-Based Carbon Nanofiber-Graphene Nanoplatelet Materials. Acs Omega vol. 1 (2), 202-211.
  • Denkov N, Cholakova D, Tcholakova S and Smoukov SK (2016). On the Mechanism of Drop Self-Shaping in Cooled Emulsions. Langmuir vol. 32 (31), 7985-7991.
  • Giosia MD, Polishchuk I, Weber E, Fermani S, Pasquini L, Pugno NM, Zerbetto F, Montalti M, Calvaresi M, Falini G and Pokroy B (2016). Bioinspired Nanocomposites: Ordered 2D Materials Within a 3D Lattice. Advanced Functional Materials vol. 26 (30), 5569-5575.
  • Favata A, Micheletti A, Podio-Guidugli P and Pugno NM (2016). How graphene flexes and stretches under concomitant bending couples and tractions. Meccanica, 1-24.
  • Wang T, Farajollahi M, Choi YS, Lin IT, Marshall JE, Thompson NM, Kar-Narayan S, Madden JDW and Smoukov SK (2016). Electroactive polymers for sensing. Interface Focus vol. 6 (4)
  • Valentini L, Bittolo Bon S and Pugno NM (2016). Severe graphene nanoplatelets aggregation as building block for the preparation of negative temperature coefficient and healable silicone rubber composites. Composites Science and Technology vol. 134, 125-131.
  • MENG N, Mao R, Tu W, Zhu X, Wilson R, Bilotti E and Reece M (2016). Processing and Characterization of Free Standing Highly Oriented Ferroelectric Polymer Films with Remarkably Low Coercive Field and High Remnant Polarization. Polymer vol. 100, 69-76.
  • Torabi M, Karimi N, Zhang K and Peterson GP (2016). Generation of entropy and forced convection of heat in a conduit partially filled with porous media – Local thermal non-equilibrium and exothermicity effects. Applied Thermal Engineering vol. 106, 518-536.
  • Palermo V, Kinloch IA, Ligi S and Pugno NM (2016). Nanoscale Mechanics of Graphene and Graphene Oxide in Composites: A Scientific and Technological Perspective. Advanced Materials vol. 28 (29), 6232-6238.
  • Sheng Q, Sun J, Wang Q, Wang W and Wang HS (2016). On the onset of surface condensation: Formation and transition mechanisms of condensation mode. Nature Publishing Group: Open Access Journals - Option C Scientific Reports
  • Albaaji AJ, Castle EG, Reece MJ, Hall JP and Evans SL (2016). Synthesis and properties of graphene and graphene/carbon nanotube-reinforced soft magnetic FeCo alloy composites by spark plasma sintering. Journal of Materials Science vol. 51 (16), 7624-7635.
  • Broseghini M, Gelisio L, D'Incau M, Azanza Ricardo CL, Pugno NM and Scardi P (2016). Modeling of the planetary ball-milling process: The case study of ceramic powders. Journal of The European Ceramic Society vol. 36 (9), 2205-2212.
  • Zhou J, Lu X and Boek ES (2016). Changes in the interlayer structure and thermodynamics of hydrated montmorillonite under basin conditions: Molecular simulation approaches. Clay Minerals Society Clays and Clay Minerals vol. 64 (4), 503-511.
  • Torabi M, Peterson GP and Karimi N (2016). A thermodynamic analysis of forced convection through porous media using pore scale modeling. International Journal of Heat and Mass Transfer vol. 99, 303-316.
  • Awaja F, Zhang S, Tripathi M, Nikiforov A and Pugno N (2016). Cracks, microcracks and fracture in polymer structures: Formation, detection, autonomic repair. Progress in Materials Science vol. 83, 536-573.
  • Fu TR, Zong AZ, Zhang YR and WANG HS (2016). A method to measure heat flux in convection using Gardon gauge. Elsevier Applied Thermal Engineering vol. 108, 1357-1361.
  • Bhadeshia HKDH (2016). Recent developments in bearing steels. Materials Science and Technology (United Kingdom) vol. 32 (11), 1059-1061.
  • Crick CR, Noimark S, Peveler WJ, Bear JC, Ivanov AP, Edel JB and Parkin IP (2016). Advanced compositional analysis of Nanoparticle-polymer composites using direct fluorescence imaging. Journal of Visualized Experiments vol. 2016 (113)
  • Muhammed MM, Roldan MA, Yamashita Y, Sahonta SL, Ajia IA, Iizuka K, Kuramata A, Humphreys CJ and Roqan IS (2016). High-quality III-nitride films on conductive, transparent (201)-oriented β-Ga2O3 using a GaN buffer layer. Scientific Reports vol. 6
  • Pristovsek M, Han Y, Zhu T, Oehler F, Tang F, Oliver RA, Humphreys CJ, Tytko D, Choi PP, Raabe D, Brunner F and Weyers M (2016). Structural and optical properties of (1122) InGaN quantum wells compared to (0001) and (1120). Semiconductor Science and Technology vol. 31 (8)
  • Ning H, Reece MJ, Smeacetto F and Salvo M (2016). Oxidation protective glass–ceramic coating for higher manganese silicide thermoelectrics. Springer Verlag (Germany) Journal of Materials Science vol. 51 (20), 9484-9489.
  • Broseghini M, D'Incau M, Gelisio L, Pugno NM and Scardi P (2016). Effect of jar shape on high-energy planetary ball milling efficiency: Simulations and experiments. Materials and Design vol. 110, 365-374.
  • Jorge AB and Hazael R (2016). Use of Shewanella oneidensis for Energy Conversion in Microbial Fuel Cells. Macromolecular Chemistry and Physics vol. 217 (13), 1431-1438.
  • Jimenez-Solomon MF, Song Q, Jelfs KE, Munoz-Ibanez M and Livingston AG (2016). Polymer nanofilms with enhanced microporosity by interfacial polymerization. Nature Materials vol. 15 (7), 760-767.
  • Presa S, Maaskant PP, Kappers MJ, Humphreys CJ and Corbett B (2016). Combined electrical and resonant optical excitation characterization of multi-quantum well InGaN-based light-emitting diodes. Aip Advances vol. 6 (7)
  • Favata A, Micheletti A, Ryu S and Pugno NM (2016). An analytical benchmark and a Mathematica program for MD codes: Testing LAMMPS on the 2nd generation Brenner potential. Computer Physics Communications vol. 207, 426-431.
  • Fischer M and Jiang X (2016). The chemical effects of addition to methane on aromatic chemistry. Fuel vol. 183, 386-395.
  • Xue X, Tang Y, Lei X, Chen Y, Wu J and Wang H (2016). Numerical investigation of three types of active magnetic regenerator for room temperature. Sichuan Daxue Xuebao (Gongcheng Kexue Ban)/Journal of Sichuan University (Engineering Science Edition) vol. 48, 200-206.
  • García G, Preda I, Díaz-Híjar M, Tormo-Márquez V, Peña-Rodríguez O, Olivares J, Bosia F, Pugno NM, Picollo F, Giuntini L, Sordini A, Olivero P, López-Mir L and Ocal C (2016). Micro and nano-patterning of single-crystal diamond by swift heavy ion irradiation. Diamond and Related Materials vol. 69, 1-7.
  • Ferrero GA, Preuss K, Marinovic A, Jorge AB, Mansor N, Brett DJ, Fuertes AB, Sevilla M and Titirici MM (2016). Fe-N-Doped Carbon Capsules with Outstanding Electrochemical Performance and Stability for the Oxygen Reduction Reaction in Both Acid and Alkaline Conditions. Acs Nano vol. 10 (6), 5922-5932.
  • Chai L, Xia GD and Wang HS (2016). Laminar flow and heat transfer characteristics of interrupted microchannel heat sink with ribs in the transverse microchambers. International Journal of Thermal Sciences vol. 110, 1-11.
  • Dickson C, Torabi M and Karimi N (2016). First and second law analyses of nanofluid forced convection in a partially-filled porous channel - The effects of local thermal non-equilibrium and internal heat sources. Applied Thermal Engineering vol. 103, 459-480.
  • Polydorou E, Zeniou A, Tsikritzis D, Soultati A, Sakellis I, Gardelis S, Papadopoulos TA, Briscoe J, Palilis LC, Kennou S, Gogolides E, Argitis P, Davazoglou D and Vasilopoulou M (2016). Surface passivation effect by fluorine plasma treatment on ZnO for efficiency and lifetime improvement of inverted polymer solar cells. Journal of Materials Chemistry A vol. 4 (30), 11844-11858.
  • Battiato A, Lorusso M, Bernardi E, Picollo F, Bosia F, Ugues D, Zelferino A, Damin A, Baima J, Pugno NM, Ambrosio EP and Olivero P (2016). Softening the ultra-stiff: Controlled variation of Young's modulus in single-crystal diamond by ion implantation. Acta Materialia vol. 116, 95-103.
  • Volpe R, Messineo A and Millan M (2016). Carbon reactivity in biomass thermal breakdown. Fuel vol. 183, 139-144.
  • Bhadeshia HKDH (2016). Advanced metallic alloys for the fossil fuel industries. Materials Science and Technology (United Kingdom) vol. 32 (7), 662-663.
  • Bhadeshia HKDH (2016). Additive manufacturing. Materials Science and Technology (United Kingdom) vol. 32 (7), 615-616.
  • Lee HKH, Li Z, Durrant JR and Tsoi WC (2016). Is organic photovoltaics promising for indoor applications? Aip Publishing Applied Physics Letters vol. 108 (25)
  • Davies MJ, Dawson P, Hammersley S, Zhu T, Kappers MJ, Humphreys CJ and Oliver RA (2016). Comparative studies of efficiency droop in polar and non-polar InGaN quantum wells. Applied Physics Letters vol. 108 (25)
  • Le Goupil F, McKinnon R, Koval V, Viola G, Dunn S, Berenov A, Yan H and Alford NM (2016). Tuning the electrocaloric enhancement near the morphotropic phase boundary in lead-free ceramics. Sci Rep vol. 6, 28251-28251.
  • Freedman KJ, Crick CR, Albella P, Barik A, Ivanov AP, Maier SA, Oh SH and Edel JB (2016). On-Demand Surface-And Tip-Enhanced Raman Spectroscopy Using Dielectrophoretic Trapping and Nanopore Sensing. Acs Photonics vol. 3 (6), 1036-1044.
  • Valentini L, Bon SB, Signetti S, Tripathi M, Iacob E and Pugno NM (2016). Fermentation based carbon nanotube multifunctional bionic composites. Sci Rep vol. 6, 27031-27031.
  • Saunders T, Grasso S and Reece MJ (2016). Ultrafast-Contactless Flash Sintering using Plasma Electrodes. Scientific Reports vol. 6
  • Li Y, Bushby AJ and Dunstan DJ (2016). The Hall-Petch effect as a manifestation of the general size effect. Royal Society Proc Royal Soc A
  • Fenwick O, Coutiño-Gonzalez E, Grandjean D, Baekelant W, Richard F, Bonacchi S, De Vos D, Lievens P, Roeffaers M, Hofkens J and Samorì P (2016). Tuning the energetics and tailoring the optical properties of silver clusters confined in zeolites. Nature Materials
  • Chai L, Xia GD and Wang HS (2016). Parametric study on thermal and hydraulic characteristics of laminar flow in microchannel heat sink with fan-shaped ribs on sidewalls – Part 2: pressure drop. Elsevier International Journal of Heat and Mass Transfer
  • Chai L, Xia GD and Wang HS (2016). Parametric study on thermal and hydraulic characteristics of laminar flow in microchannel heat sink with fan-shaped ribs on sidewalls – Part 1: heat transfer. Elsevier International Journal of Heat and Mass Transfer
  • Ongaro F, De Falco P, Barbieri E and Pugno NM (2016). Mechanics of filled cellular materials. Mechanics of Materials vol. 97, 26-47.
  • Torabi M, Zhang K, Karimi N and Peterson GP (2016). Entropy generation in thermal systems with solid structures - A concise review. International Journal of Heat and Mass Transfer vol. 97, 917-931.
  • Darwish MSA, Nguyen NHA, Ševců A, Stibor I and Smoukov SK (2016). Dual-modality self-heating and antibacterial polymer-coated nanoparticles for magnetic hyperthermia. Materials Science and Engineering C vol. 63, 88-95.
  • González M, Crespo M, Baselga J and Pozuelo J (2016). Carbon nanotube scaffolds with controlled porosity as electromagnetic absorbing materials in the gigahertz range. Nanoscale vol. 8 (20), 10724-10730.
  • Lugovy M, Slyunyayev V, Orlovskaya N, Reece M, Graule T and Kuebler J (2016). Cyclic fatigue effect in particulate ceramic composites. Elsevier Journal of The European Ceramic Society vol. 36 (14), 3257-3266.
  • Spencer BF, Smith WF, Hibberd MT, Dawson P, Beck M, Bartels A, Guiney I, Humphreys CJ and Graham DM (2016). Terahertz cyclotron resonance spectroscopy of an AlGaN/GaN heterostructure using a high-field pulsed magnet and an asynchronous optical sampling technique. Applied Physics Letters vol. 108 (21)
  • Zhong J and Jiang X (2016). A study of using cosmic-ray muon radiography to detect CO2 leakage from a primary storage into geological formations. Environmental Earth Sciences vol. 75 (10)
  • Ding T, Valev VK, Salmon AR, Forman CJ, Smoukov SK, Scherman OA, Frenkel D and Baumberg JJ (2016). Light-induced actuating nanotransducers. National Academy of Sciences Proceedings of The National Academy of Sciences vol. 113 (20), 5503-5507.
  • Dawson P, Schulz S, Oliver RA, Kappers MJ and Humphreys CJ (2016). The nature of carrier localisation in polar and nonpolar InGaN/GaN quantum wells. Journal of Applied Physics vol. 119 (18)
  • Qian H, Lee KB, Vajargah SH, Novikov SV, Guiney I, Zhang S, Zaidi ZH, Jiang S, Wallis DJ, Foxon CT, Humphreys CJ and Houston PA (2016). Characterization of p-GaN1-xAsx/n-GaN PN junction diodes. Semiconductor Science and Technology vol. 31 (6)
  • Papageorgiou DG, Guigo N, Tsanaktsis V, Exarhopoulos S, Bikiaris DN, Sbirrazzuoli N and Papageorgiou GZ (2016). Fast Crystallization and Melting Behavior of a Long-Spaced Aliphatic Furandicarboxylate Biobased Polyester, Poly(dodecylene 2,5-furanoate). Industrial and Engineering Chemistry Research vol. 55 (18), 5315-5326.
  • Lepore E, Isaia M, Mammola S and Pugno N (2016). The effect of ageing on the mechanical properties of the silk of the bridge spider Larinioides cornutus (Clerck, 1757). Sci Rep vol. 6, 24699-24699.
  • Griffiths JT, Oehler F, Tang F, Zhang S, Fu WY, Zhu T, Findlay SD, Zheng C, Etheridge J, Martin TL, Bagot PAJ, Moody MP, Sutherland D, Dawson P, Kappers MJ, Humphreys CJ and Oliver RA (2016). The microstructure of non-polar a-plane (11 2 0) InGaN quantum wells. Journal of Applied Physics vol. 119 (17)
  • Zhou X, Jiang X and Mira Martinez D (2016). The effects of chemical kinetic mechanisms on large eddy simulation (LES) of a nonpremixed hydrogen jet flame. International Journal of Hydrogen Energy vol. 41 (26), 11427-11440.
  • Han Y, Caliebe M, Hage F, Ramasse Q, Pristovsek M, Zhu T, Scholz F and Humphreys C (2016). Toward defect-free semi-polar GaN templates on pre-structured sapphire. Physica Status Solidi (B) Basic Research vol. 253 (5), 834-839.
  • Waller WM, Uren MJ, Lee KB, Houston PA, Wallis DJ, Guiney I, Humphreys CJ, Pandey S, Sonsky J and Kuball M (2016). Subthreshold mobility in AlGaN/GaN HEMTs. Ieee Transactions On Electron Devices vol. 63 (5), 1861-1865.
  • Grasso S, Saunders T, Porwal H, Milsom B, Tudball A, Reece M and Chen IW (2016). Flash Spark Plasma Sintering (FSPS) of α and β SiC. Journal of The American Ceramic Society vol. 99 (5), 1534-1543.
  • Porwal H, Saggar R, Tatarko P, Grasso S, Saunders T, Dlouhý I and Reece MJ (2016). Effect of lateral size of graphene nano-sheets on the mechanical properties and machinability of alumina nano-composites. Elsevier Ceramics International vol. 42 (6), 7533-7542.
  • Macdonald TJ, Tune DD, Dewi MR, Bear JC, McNaughter PD, Mayes AG, Skinner WM, Parkin IP, Shapter JG and Nann T (2016). SWCNT photocathodes sensitised with InP/ZnS core-shell nanocrystals. Journal of Materials Chemistry C vol. 4 (16), 3379-3384.
  • Rouet-Leduc B, Barros K, Lookman T and Humphreys CJ (2016). Optimisation of GaN LEDs and the reduction of efficiency droop using active machine learning. Scientific Reports vol. 6
  • Gao J, Uribe-Romo FJ, Saathoff JD, Arslan H, Crick CR, Hein SJ, Itin B, Clancy P, Dichtel WR and Loo YL (2016). Ambipolar Transport in Solution-Synthesized Graphene Nanoribbons. American Chemical Society Acs Nano vol. 10 (4), 4847-4856.
  • Kamran MS, Ali H, Farhan M, Tang YB, Chen YG and Wang HS (2016). Performance optimisation of room temperature magnetic refrigerator with layered/multi-material microchannel regenerators. International Journal of Refrigeration vol. 68, 94-106.
  • Chen X, Zheng M, Wei Q, Signetti S, Pugno NM and Ke C (2016). Deformation of nanotubes in peeling contact with flat substrate: An in situ electron microscopy nanomechanical study. Journal of Applied Physics vol. 119 (15)
  • Amir A, Mahalingam S, Wu X, Porwal H, Colombo P, Reece MJ and Edirisinghe M (2016). Graphene nanoplatelets loaded polyurethane and phenolic resin fibres by combination of pressure and gyration. Elsevier Composites Science and Technology vol. 129, 173-182.
  • Caliebe M, Tandukar S, Cheng Z, Hocker M, Han Y, Meisch T, Heinz D, Huber F, Bauer S, Plettl A, Humphreys C, Thonke K and Scholz F (2016). Influence of trench period and depth on MOVPE grown (1122) GaN on patterned r-plane sapphire substrates. Journal of Crystal Growth vol. 440, 69-75.
  • Ikhe AB, Kale AB, Jeong J, Reece MJ, Choi S-H and Pyo M (2016). Perfluorinated polysiloxane hybridized with graphene oxide for corrosion inhibition of AZ31 magnesium alloy. Corrosion Science vol. 109, 238-245.
  • Zambon A, Vetralla M, Urbani L, Pantano MF, Ferrentino G, Pozzobon M, Pugno N, De Coppi P, Elvassore N and Spilimbergo S (2016). Dry acellular oesophageal matrix prepared by supercritical carbon dioxide. Journal of Supercritical Fluids vol. 115, 33-41.
  • Le Boulbar ED, Edwards PR, Vajargah SH, Griffiths I, Gîrgel I, Coulon PM, Cherns D, Martin RW, Humphreys CJ, Bowen CR, Allsopp DWE and Shields PA (2016). Structural and Optical Emission Uniformity of m-Plane InGaN Single Quantum Wells in Core-Shell Nanorods. Crystal Growth and Design vol. 16 (4), 1907-1916.
  • Tatti R, Aversa L, Verucchi R, Cavaliere E, Garberoglio G, Pugno NM, Speranza G and Taioli S (2016). Synthesis of single layer graphene on Cu(111) by C60 supersonic molecular beam epitaxy. Rsc Advances vol. 6 (44), 37982-37993.
  • Hosseinalipour SM, Fattahi A and Karimi N (2016). Analytical investigation of non-adiabatic effects on the dynamics of sound reflection and transmission in a combustor. Applied Thermal Engineering vol. 98, 553-567.
  • Sun Y, Li Z, Zhang H, Yu C, Viola G, Fu S, Koval V and Yan H (2016). Lead free Bi3TaTiO9 ferroelectric ceramics with high Curie point. Elsevier Materials Letters vol. 175, 79-81.
  • Asare E, Basir A, Tu W, Porwal H, Zhang H, Liu Y, Evans J, Newton M, Peijs T and Bilotti E (2016). Effect of mixed fillers on positive temperature coefficient of conductive polymer composites. Nanocomposites vol. 2 (2), 58-64.
  • chai L, Xia GD and Wang HS (2016). Parametric study on thermal and hydraulic characteristics of laminar flow in microchannel heat sink with fan-shaped ribs on sidewalls – Part 3: performance evaluation. Elsevier International Journal of Heat and Mass Transfer
  • Elliott A, Torabi M, Karimi N and Cunningham S (2016). On the effects of internal heat sources upon forced convection in porous channels with asymmetric thick walls. International Communications in Heat and Mass Transfer vol. 73, 100-110.
  • Zacharoudiou I and Boek ES (2016). Capillary filling and Haines jump dynamics using free energy Lattice Boltzmann simulations. Advances in Water Resources vol. 92, 43-56.
  • Chen Q, Shi Q, Signetti S, Sun F, Li Z, Zhu F, He S and Pugno NM (2016). Plastic collapse of cylindrical shell-plate periodic honeycombs under uniaxial compression: Experimental and numerical analyses. International Journal of Mechanical Sciences vol. 111-112, 125-133.
  • Valentini L, Bittolo Bon S, Signetti S and Pugno NM (2016). Graphene-Based Bionic Composites with Multifunctional and Repairing Properties. Acs Applied Materials and Interfaces vol. 8 (12), 7607-7612.
  • Tripathi M, Awaja F, Paolicelli G, Bartali R, Iacob E, Valeri S, Ryu S, Signetti S, Speranza G and Pugno NM (2016). Tribological characteristics of few-layer graphene over Ni grain and interface boundaries. Nanoscale vol. 8 (12), 6646-6658.
  • Xia W, Ruiz L, Pugno NM and Keten S (2016). Critical length scales and strain localization govern the mechanical performance of multi-layer graphene assemblies. Nanoscale vol. 8 (12), 6456-6462.
  • Guerrero-Martínez FJ, Younger PL and Karimi N (2016). Three-dimensional numerical modeling of free convection in sloping porous enclosures. Elsevier International Journal of Heat and Mass Transfer vol. 98, 257-267.
  • Bizzarri C, Fléchon C, FENWICK OJ, Cacialli F, Polo F, Galvez-Lopez MD, Yang C-H, Scintilla S, Sun Y, Frohlich R and De Cola L (2016). Luminescent Neutral Cu(I) Complexes: Synthesis, Characterization and Application in Solution-Processed OLED. Ecs Ecs Journal of Solid State Science and Technology vol. 5 (6), R83-R90.
  • Valentini L, Bittolo Bon S, Lopez-Manchado MA, Verdejo R, Pappalardo L, Bolognini A, Alvino A, Borsini S, Berardo A and Pugno NM (2016). Synergistic effect of graphene nanoplatelets and carbon black in multifunctional EPDM nanocomposites. Composites Science and Technology vol. 128, 123-130.
  • Kamran MS, Sun J, Tang YB, Chen YG, Wu JH and Wang HS (2016). Numerical investigation of room temperature magnetic refrigerator using microchannel regenerators. Elsevier Applied Thermal Engineering vol. 102, 1126-1140.
  • Huang M, Tunnicliffe LB, Zhuang J, Ren W, Yan H and Busfield JJC (2016). Strain-Dependent Dielectric Behavior of Carbon Black Reinforced Natural Rubber. Macromolecules vol. 49 (6), 2339-2347.
  • Dimitrova IM, Slavchov RI, Ivanov T and Mosbach S (2016). A spherical cavity model for quadrupolar dielectrics. Journal of Chemical Physics vol. 144 (11)
  • Greco A and Jiang X (2016). A coupled thermal and electrochemical study of lithium-ion battery cooled by paraffin/porous-graphite-matrix composite. Journal of Power Sources vol. 315, 127-139.
  • Zhong J and Jiang X (2016). A case study of using cosmic ray muons to monitor supercritical CO2 migration in geological formations. Applied Energy vol. 185, 1450-1458.
  • Rhode SL, Horton MK, Sahonta SL, Kappers MJ, Haigh SJ, Pennycook TJ, McAleese C, Humphreys CJ, Dusane RO and Moram MA (2016). Dislocation core structures in (0001) InGaN. Journal of Applied Physics vol. 119 (10)
  • Gao H, Wen D, Tarakina NV, Liang J, Bushby AJ and Sukhorukov GB (2016). Bifunctional ultraviolet/ultrasound responsive composite TiO2/polyelectrolyte microcapsules. Nanoscale vol. 8 (9), 5170-5180.
  • Taioli S, Gabbrielli R, Simonucci S, Pugno NM and Iorio A (2016). Lobachevsky crystallography made real through carbon pseudospheres. Journal of Physics Condensed Matter vol. 28 (13)
  • Fischer M and Jiang X (2016). A chemical kinetic modelling study of the combustion of CH4–CO–H2–CO2 fuel mixtures. Combustion and Flame vol. 167, 274-293.
  • Jalali SK, Pugno NM and Jomehzadeh E (2016). Influence of out-of-plane defects on vibration analysis of graphene sheets: Molecular and continuum approaches. Superlattices and Microstructures vol. 91, 331-344.
  • Zhou J, Lu X and Boek ES (2016). Confined water in tunnel nanopores of sepiolite: Insights from molecular simulations. American Mineralogist vol. 101 (3), 713-718.
  • Soavi G, Tempra I, Pantano MF, Cattoni A, Collin S, Biagioni P, Pugno NM and Cerullo G (2016). Ultrasensitive Characterization of Mechanical Oscillations and Plasmon Energy Shift in Gold Nanorods. Acs Nano vol. 10 (2), 2251-2258.
  • Mahmood H, Tripathi M, Pugno N and Pegoretti A (2016). Enhancement of interfacial adhesion in glass fiber/epoxy composites by electrophoretic deposition of graphene oxide on glass fibers. Composites Science and Technology vol. 126, 149-157.
  • Grasso S, Kim E-Y, Saunders T, Yu M, Tudball A, Choi S-H and Reece M (2016). Ultra-Rapid Crystal Growth of Textured SiC Using Flash Spark Plasma Sintering Route. American Chemical Society Crystal Growth and Design vol. 16 (4), 2317-2321.
  • Fielding LCD, Jones NG, Walsh J, Van Boxel S, Blackmur MS, Lee PD, Withers PJ, Stone HJ and Bhadeshia HKDH (2016). Synchrotron analysis of toughness anomalies in nanostructured bainite. Acta Materialia vol. 105, 52-58.
  • Roberts JW, Chalker PR, Lee KB, Houston PA, Cho SJ, Thayne IG, Guiney I, Wallis D and Humphreys CJ (2016). Control of threshold voltage in E-mode and D-mode GaN-on-Si metal-insulator-semiconductor heterostructure field effect transistors by in-situ fluorine doping of atomic layer deposition Al2O3 gate dielectrics. Applied Physics Letters vol. 108 (7)
  • Cedillos-Barraza O, Grasso S, Nasiri NA, Jayaseelan DD, Reece MJ and Lee WE (2016). Sintering behaviour, solid solution formation and characterisation of TaC, HfC and TaC-HfC fabricated by spark plasma sintering. Journal of The European Ceramic Society vol. 36 (7), 1539-1548.
  • Pantano MF, Berardo A and Pugno NM (2016). Tightening slip knots in raw and degummed silk to increase toughness without losing strength. Sci Rep vol. 6, 18222-18222.
  • Bosia F, Lepore E, Alvarez NT, Miller P, Shanov V and Pugno NM (2016). Knotted synthetic polymer or carbon nanotube microfibres with enhanced toughness, up to 1400 J/g. Carbon vol. 102, 116-125.
  • Ghio S, Paternoster G, Bartali R, Belluti P, Boscardin M and M. Pugno N (2016). Fast and large area fabrication of hierarchical bioinspired superhydrophobic silicon surfaces. Elsevier Journal of The European Ceramic Society vol. 36 (9), 2363-2369.
  • Davies MJ, Hammersley S, Massabuau FCP, Dawson P, Oliver RA, Kappers MJ and Humphreys CJ (2016). A comparison of the optical properties of InGaN/GaN multiple quantum well structures grown with and without Si-doped InGaN prelayers. Journal of Applied Physics vol. 119 (5)
  • Zhu T, Ding T, Tang F, Han Y, Ali M, Badcock T, Kappers MJ, Shields AJ, Smoukov SK and Oliver RA (2016). Self-assembled Multilayers of Silica Nanospheres for Defect Reduction in Non- and Semipolar Gallium Nitride Epitaxial Layers. Crystal Growth and Design vol. 16 (2), 1010-1016.
  • Horlait D, Grasso S, Al Nasiri N, Burr PA and Lee WE (2016). Synthesis and Oxidation Testing of MAX Phase Composites in the Cr-Ti-Al-C Quaternary System. Journal of The American Ceramic Society vol. 99 (2), 682-690.
  • Csanádi T, Szommer P, Chinh NQ, Grasso S, Dusza J and Reece M (2016). Plasticity in ZrB2 micropillars induced by anomalous slip activation. Journal of The European Ceramic Society vol. 36 (3), 389-394.
  • Chen C, Gao Z, Yan H and Reece MJ (2016). Crystallographic Structure and Ferroelectricity of (AxLa1-x)2Ti2O7 (A = Sm and Eu) Solid Solutions with High Tc. Journal of The American Ceramic Society vol. 99 (2), 523-530.
  • Wang L, Loh KJ, Brely L, Bosia F and Pugno NM (2016). An experimental and numerical study on the mechanical properties of carbon nanotube-latex thin films. Journal of The European Ceramic Society vol. 36 (9), 2255-2262.
  • Stadelmann R, Lugovy M, Orlovskaya N, Mchaffey P, Radovic M, Sglavo VM, Grasso S and Reece MJ (2016). Mechanical properties and residual stresses in ZrB2–SiC spark plasma sintered ceramic composites. Journal of The European Ceramic Society vol. 36 (7), 1527-1537.
  • Hosseinalipour SM, Fattahi A and Karimi N (2016). Investigation of the transmitted noise of a combustor exit nozzle caused by burned hydrogen-hydrocarbon gases. International Journal of Hydrogen Energy vol. 41 (3), 2075-2086.
  • Turek VA, Francescato Y, Cadinu P, Crick CR, Elliott L, Chen Y, Urland V, Ivanov AP, Velleman L, Hong M, Vilar R, Maier SA, Giannini V and Edel JB (2016). Self-Assembled Spherical Supercluster Metamaterials from Nanoscale Building Blocks. Acs Photonics vol. 3 (1), 35-42.
  • Han Y, Zhu D, Zhu T, Humphreys CJ and Wallis DJ (2016). Origins of hillock defects on GaN templates grown on Si(111). Journal of Crystal Growth vol. 434, 123-127.
  • Du B, Chen K, Yan H and Reece MJ (2016). Efficacy of lone-pair electrons to engender ultralow thermal conductivity. Scripta Materialia vol. 111, 49-53.
  • Rogal L, Solano-Alvarez W, Szklarz Z and Bhadeshia HKDH (2016). Feasibility study for thixoforming nanostructured bainitic steels. Materials Science and Engineering: A vol. 651, 708-719.
  • Chai L, Xia GD and Wang HS (2016). Numerical study of laminar flow and heat transfer in microchannel heat sink with offset ribs on sidewalls. Applied Thermal Engineering vol. 92, 32-41.
  • Jonckheere D, Coutino-Gonzalez E, Baekelant W, Bueken B, Reinsch H, Stassen I, Fenwick O, Richard F, Samorì P, Ameloot R, Hofkens J, Roeffaers MBJ and De Vos DE (2016). Silver-induced reconstruction of an adeninate-based metal-organic framework for encapsulation of luminescent adenine-stabilized silver clusters. Journal of Materials Chemistry C vol. 4 (19), 4259-4268.
  • Bhadeshia HKDH (2016). Prevention of hydrogen embrittlement in steels. Isij International vol. 56 (1), 24-36.
  • Elmas S, Beelders W, Nash J, Macdonald TJ, Jasieniak M, Griesser HJ and Nann T (2016). Photo-doping of plasma-deposited polyaniline (PAni). Rsc Advances vol. 6 (74), 70691-70699.
  • Blanco E, Smoukov SK, Velev OD and Velikov KP (2016). Organic-inorganic patchy particles as a versatile platform for fluid-in-fluid dispersion stabilisation. Faraday Discussions vol. 191, 73-88.
  • Pristovsek M, Frentrup M, Han Y and Humphreys CJ (2016). Optimizing GaN (1122) hetero-epitaxial templates grown on (1010) sapphire. Physica Status Solidi (B) Basic Research vol. 253 (1), 61-66.
  • Li Y, Zhang H, Bilotti E and Peijs T (2016). Optimization of Three-Roll Mill Parameters for In-Situ Exfoliation of Graphene. Mrs Advances vol. 1 (19), 1389-1394.
  • Csanádi T, Grasso S, Kovalčíková A, Dusza J and Reece M (2016). Nanohardness and elastic anisotropy of ZrB2 crystals. Journal of The European Ceramic Society vol. 36 (1), 239-242.
  • Kakanakova-Georgieva A, Sahonta SL, Nilsson D, Trinh XT, Son NT, Janzén E and Humphreys CJ (2016). N-Type conductivity bound by the growth temperature: The case of Al0.72Ga0.28N highly doped by silicon. Journal of Materials Chemistry C vol. 4 (35), 8291-8296.
  • Torabi M, Karimi N and Mahmud S (2016). Mathematical Methods for Heat Transfer and Thermodynamic Analysis of Conductive, Convective, and Radiative Media. Mathematical Problems in Engineering vol. 2016
  • Caliebe M, Han Y, Hocker M, Meisch T, Humphreys C, Thonke K and Scholz F (2016). Growth and coalescence studies of (1122) oriented GaN on pre-structured sapphire substrates using marker layers. Physica Status Solidi (B) Basic Research vol. 253 (1), 46-53.
  • Li Y, Zhang H, Peijs T and Bilotti E (2016). Graphene Delivery Systems for Hierarchical Fiber Reinforced Composites. Mrs Advances vol. 1 (19), 1339-1344.
  • Cain MG, Weaver PM and Reece MJ (2016). Ferroelectric materials for fusion energy applications. Journal of Materials Chemistry A vol. 4 (27), 10394-10402.
  • Gray F and Boek E (2016). Enhancing computational precision for lattice Boltzmann schemes in porous media flows. Computation vol. 4 (1)
  • Li Y, Porwal H, Huang Z, Zhang H, Bilotti E and Peijs T (2016). Enhanced Thermal and Electrical Properties of Polystyrene-Graphene Nanofibers via Electrospinning. Journal of Nanomaterials vol. 2016
  • Ruzié C, Karpinska J, Laurent A, Sanguinet L, Hunter S, Anthopoulos TD, Lemaur V, Cornil J, Kennedy AR, Fenwick O, Samorì P, Schweicher G, Chattopadhyay B and Geerts YH (2016). Design, synthesis, chemical stability, packing, cyclic voltammetry, ionisation potential, and charge transport of [1]benzothieno[3,2-: B] [1]benzothiophene derivatives. Journal of Materials Chemistry C vol. 4 (22), 4863-4879.
  • Ozkan E, Crick CC, Taylor A, Allan E and Parkin IP (2016). Copper-based water repellent and antibacterial coatings by aerosol assisted chemical vapour deposition. Chemical Science vol. 7 (8), 5126-5131.
  • Christodoulou L, Kabiraj L, Saurabh A and Karimi N (2016). Characterizing the signature of flame flashback precursor through recurrence analysis. Chaos vol. 26 (1)
  • Terzopoulou Z, Tsanaktsis V, Bikiaris DN, Exarhopoulos S, Papageorgiou DG and Papageorgiou GZ (2016). Biobased poly(ethylene furanoate-: Co -ethylene succinate) copolyesters: Solid state structure, melting point depression and biodegradability. Rsc Advances vol. 6 (87), 84003-84015.
  • Horlait D, Grasso S, Chroneos A and Lee WE (2016). Attempts to synthesise quaternary MAX phases (Zr,m)2ALC and Zr2(AL,A)C as a way to approach Zr2ALC. Materials Research Letters vol. 4 (3), 137-144.
  • Bhadeshia HKDH (2016). Atomic scale structure characterization. Materials Science and Technology (United Kingdom) vol. 32 (3), 201-202.
  • Li K, Zhou X, Tu R, Xie Q, Yi J and Jiang X (2016). An experimental investigation of supercritical CO2 accidental release from a pressurized pipeline. Journal of Supercritical Fluids vol. 107, 298-306.
  • Alvim RS, Lima FCDA, Sánchez VM, Headen TF, Boek ES and Miranda CR (2016). Adsorption of asphaltenes on the calcite (10.4) surface by first-principles calculations. Rsc Advances vol. 6 (97), 95328-95336.
  • Alfotawi R, Ayoub AF, Tanner KE, Dalby MJ, Naudi KB and McMahon J (2016). A novel surgical approach for the reconstruction of critical-size mandibular defects using calcium sulphate/hydroxyapatite cement, BMP-7 and mesenchymal stem cells-histological assessment. Journal of Biomaterials and Tissue Engineering vol. 6 (1), 1-11.