Dr Salvatore Grasso
PhD, MSc, FHEA, MIMMM
All Publications
Page 4 of 5
2014
- Porwal H, Grasso S, Cordero-Arias L, Li C, Boccaccini AR and Reece MJ (2014). Processing and bioactivity of 45S5 Bioglass®-graphene nanoplatelets composites. Journal of Materials Science: Materials in Medicine vol. 25 (6), 1403-1413.
01-06-2014 - Jiang Q, Yan H, Khaliq J, Ning H, Grasso S, Simpson K and Reece MJ (2014). Large ZT enhancement in hot forged nanostructured p-type Bi 0.5Sb1.5Te3 bulk alloys. Journal of Materials Chemistry A vol. 2 (16), 5785-5790.
28-04-2014 - Rizzo S, Grasso S, Salvo M, Casalegno V, Reece MJ and Ferraris M (2014). Joining of C/SiC composites by spark plasma sintering technique. Journal of The European Ceramic Society vol. 34 (4), 903-913.
01-04-2014 - Tatarko P, Grasso S, Porwal H, Chlup Z, Saggar R, Dlouhý I and Reece MJ (2014). Boron nitride nanotubes as a reinforcement for brittle matrices. Journal of The European Ceramic Society
01-01-2014 - Grasso S, Saunders T, Porwal H, Cedillos-Barraza O, Jayaseelan DD, Lee WE and Reece MJ (2014). Flash Spark Plasma Sintering (FSPS) of Pure ZrB2. Journal of The American Ceramic Society
01-01-2014 - Porwal H, Grasso S, Mani MK and Reece MJ (2014). In situ reduction of graphene oxide nanoplatelet during spark plasma sintering of a silica matrix composite. Journal of The European Ceramic Society
01-01-2014 - Grasso S, Tatarko P, Rizzo S, Porwal H, Hu C, Katoh Y, Salvo M, Reece MJ and Ferraris M (2014). Joining of β-SiC by spark plasma sintering. Journal of The European Ceramic Society
01-01-2014 - Bernardo E, Ponsot I, Colombo P, Grasso S, Porwal H and Reece MJ (2014). Polymer-derived SiC ceramics from polycarbosilane/boron mixtures densified by SPS. Ceramics International
01-01-2014 - Wang Q, Hu C, Huang Q, Cai S, Sakka Y and Grasso S (2014). Synthesis of high-purity Ti3SiC2 by microwave sintering. International Journal of Applied Ceramic Technology vol. 11 (5), 911-918.
01-01-2014 - Badica P, Grasso S, Borodianska H, Xie SS, Li P, Tatarko P, Reece MJ, Sakka Y and Vasylkiv O (2014). Tough and dense boron carbide obtained by high-pressure (300 MPa) and low-temperature (1600°C) spark plasma sintering. Journal of The Ceramic Society of Japan vol. 122 (1424), 271-275.
01-01-2014 - Tatarko P, Grasso S, Chlup Z, Porwal H, Kašiarová M, Dlouhý I and Reece MJ (2014). Toughening effect of multi-walled boron nitride nanotubes and their influence on the sintering behaviour of 3Y-TZP zirconia ceramics. Journal of The European Ceramic Society
01-01-2014 - Porwal H, Tatarko P, Saggar R, Grasso S, Kumar Mani M, Dlouhý I, Dusza J and Reece MJ (2014). Tribological properties of silica-graphene nano-platelet composites. Ceramics International
01-01-2014
2013
- Porwal H, Tatarko P, Grasso S, Khaliq J, Dlouhý I and Reece MJ (2013). Graphene reinforced alumina nano-composites. Carbon vol. 64, 359-369.
01-11-2013 - Porwal H, Grasso S and Reece MJ (2013). Review of graphene-ceramic matrix composites. Advances in Applied Ceramics vol. 112 (8), 443-454.
01-11-2013 - Porwal H, Tatarko P, Grasso S, Hu C, Boccaccini AR, Dlouhý I and Reece MJ (2013). Toughened and machinable glass matrix composites reinforced with graphene and graphene-oxide nano platelets. Science and Technology of Advanced Materials vol. 14 (5)
01-10-2013 - Grasso S, Poetschke J, Richter V, Maizza G, Sakka Y and Reece MJ (2013). Low-temperature spark plasma sintering of pure nano WC powder. Journal of The American Ceramic Society vol. 96 (6), 1702-1705.
01-06-2013 - Wang Q, Grasso S, Hu C, Zhang H, Cai S, Sakka Y and Huang Q (2013). Spark plasma sintering of damage tolerant and machinable YAM ceramics. Journal of Advanced Ceramics, Tsinghua University Press vol. 2 (2), 193-200.
01-06-2013 - Grasso S, Yoshida H, Porwal H, Sakka Y and Reece M (2013). Highly transparent α-alumina obtained by low cost high pressure SPS. Ceramics International vol. 39 (3), 3243-3248.
01-04-2013 - Grasso S, Tsujii N, Jiang Q, Khaliq J, Maruyama S, Miranda M, Simpson K, Mori T and Reece MJ (2013). Ultra low thermal conductivity of disordered layered p-type bismuth telluride. Journal of Materials Chemistry C vol. 1 (12), 2362-2367.
28-03-2013 - Wei X, Yan H, Wang T, Hu Q, Viola G, Grasso S, Jiang Q, Jin L, Xu Z and Reece MJ (2013). Reverse boundary layer capacitor model in glass/ceramic composites for energy storage applications. Journal of Applied Physics vol. 113 (2)
14-01-2013 - Grasso S, Chinnam RK, Porwal H, Boccaccini AR and Reece MJ (2013). Low temperature spark plasma sintering of 45S5 Bioglass®. Journal of Non-Crystalline Solids vol. 362 (1), 25-29.
07-01-2013 - Grasso S and Sakka Y (2013). Electric field in SPS: geometry and pulsed current effects. Journal of The Ceramic Society of Japan vol. 121 (1414), 524-526.
01-01-2013 - Porwal H, Tatarko P, Grasso S, Khaliq J, Dlouhý I and Reece MJ (2013). Graphene reinforced alumina nano-composites. Carbon
01-01-2013 - Rizzo S, Grasso S, Salvo M, Casalegno V, Reece MJ and Ferraris M (2013). Joining of C/SiC composites by spark plasma sintering technique. Journal of The European Ceramic Society
01-01-2013 - Grasso S, Poetschke J, Richter V, Maizza G, Sakka Y and Reece MJ (2013). Low-temperature spark plasma sintering of pure nano wc powder. Journal of The American Ceramic Society
01-01-2013 - Wang Q, Hu C, Cai S, Sakka Y, Grasso S and Huang Q (2013). Synthesis of High-Purity Ti3SiC2 by Microwave Sintering. International Journal of Applied Ceramic Technology
01-01-2013
2012
- Rendtorff NM, Grasso S, Hu C, Suarez G, Aglietti EF and Sakka Y (2012). Dense zircon (ZrSiO 4) ceramics by high energy ball milling and spark plasma sintering. Ceramics International vol. 38 (3), 1793-1799.
01-01-2012 - Bogomol I, Grasso S, Nishimura T, Sakka Y, Loboda P and Vasylkiv O (2012). Hard polycrystalline eutectic composite prepared by spark plasma sintering. Ceramics International vol. 38 (5), 3947-3953.
01-01-2012 - Vasylkiv O, Borodianska H, Badica P, Grasso S, Sakka Y, Tok A, Su LT, Bosman M and Jan Ma (2012). High hardness B aC b-(B xO y/BN) composites with 3D mesh-like fine grain-boundary structure by reactive spark plasma sintering. Journal of Nanoscience and Nanotechnology vol. 12 (2), 959-965.
01-01-2012 - Kim BN, Hiraga K, Grasso S, Morita K, Yoshida H, Zhang H and Sakka Y (2012). High-pressure spark plasma sintering of MgO-doped transparent alumina. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of The Ceramic Society of Japan vol. 120 (1399), 116-118.
01-01-2012 - Grasso S, Yoshida H, Porwal H, Sakka Y and Reece M (2012). Highly transparent α-alumina obtained by low cost high pressure SPS. Ceramics International
01-01-2012 - Hu C, Sakka Y, Gao J, Tanaka H and Grasso S (2012). Microstructure characterization of ZrB 2-SiC composite fabricated by spark plasma sintering with TaSi 2 additive. Journal of The European Ceramic Society vol. 32 (7), 1441-1446.
01-01-2012 - Hu CF, Sakka Y, Grasso S, Tanaka H and Nishimura T (2012). Spark plasma sintering (SPS), or pulse discharge sintering (PDS) of max phases. In Max Phases: Microstructure, Properties and Applications, Nova Science Publishers, Inc. 1-28.
01-01-2012 - Grasso S, Hu C, Maizza G and Sakka Y (2012). Spark plasma sintering of diamond binderless WC composites. Journal of The American Ceramic Society vol. 95 (8), 2423-2428.
01-01-2012 - Rendtorff NM, Grasso S, Hu C, Suarez G, Aglietti EF and Sakka Y (2012). Zircon-zirconia (ZrSiO 4-ZrO 2) dense ceramic composites by spark plasma sintering. Journal of The European Ceramic Society vol. 32 (4), 787-793.
01-01-2012
2011
- Grasso S, Hu C, Maizza G, Kim BN and Sakka Y (2011). Effects of pressure application method on transparency of spark plasma sintered alumina. Journal of The American Ceramic Society vol. 94 (5), 1405-1409.
01-01-2011 - Hu C, Sakka Y, Tanaka H, Nishimura T and Grasso S (2011). Fabrication of textured Nb4AlC3 ceramic by slip casting in a strong magnetic field and spark plasma sintering. Journal of The American Ceramic Society vol. 94 (2), 410-415.
01-01-2011 - Grasso S, Hu C, Vasylkiv O, Suzuki TS, Guo S, Nishimura T and Sakka Y (2011). High-hardness B4C textured by a strong magnetic field technique. Scripta Materialia vol. 64 (3), 256-259.
01-01-2011 - Demirskyi D, Borodianska H, Grasso S, Sakka Y and Vasylkiv O (2011). Microstructure evolution during field-assisted sintering of zirconia spheres. Scripta Materialia, Elsevier/Science Direct vol. 65 (8), 683-686.
01-01-2011 - Grasso S, Sakka Y, Rendtorff N, Hu C, Maizza G, Borodianska H and Vasylkiv O (2011). Modeling of the temperature distribution of fla shsintered zirconia. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of The Ceramic Society of Japan vol. 119 (1386), 144-146.
01-01-2011 - Hu C, Sakka Y, Nishimura T, Guo S, Grasso S and Tanaka H (2011). Physical and mechanical properties of highly textured polycrystalline Nb4AlC3 ceramic. Science and Technology of Advanced Materials vol. 12 (4)
01-01-2011 - Hu C, Sakka Y, Grasso S, Nishimura T, Guo S and Tanaka H (2011). Shell-like nanolayered Nb4AlC3 ceramic with high strength and toughness. Scripta Materialia vol. 64 (8), 765-768.
01-01-2011 - Hu C, Sakka Y, Grasso S, Suzuki T and Tanaka H (2011). Tailoring Ti3SiC2 ceramic via a strong magnetic field alignment method followed by spark plasma sintering. Journal of The American Ceramic Society vol. 94 (3), 742-748.
01-01-2011
2010
- Grasso S, Kim BN, Hu C, Maizza G and Sakka Y (2010). Highly transparent pure alumina fabricated by high-pressure spark plasma sintering. Journal of The American Ceramic Society vol. 93 (9), 2460-2462.
01-01-2010 - Hu C, Sakka Y, Jang B, Tanaka H, Nishimura T, Guo S and Grasso S (2010). Microstructure and properties of ZrB2-SiC and HfB2-SiC composites fabricated by spark plasma sintering (SPS) using TaSi2 as sintering aid. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of The Ceramic Society of Japan vol. 118 (1383), 997-1001.
01-01-2010 - Hu C, Sakka Y, Tanaka H, Nishimura T, Guo S and Grasso S (2010). Microstructure and properties of ZrB2-SiC composites prepared by spark plasma sintering using TaSi2 as sintering additive. Journal of The European Ceramic Society vol. 30 (12), 2625-2631.
01-01-2010 - Hu C, Sakka Y, Tanaka H, Nishimura T and Grasso S (2010). Synthesis, microstructure and mechanical properties of (Zr,Ti)B2-(Zr,Ti)N composites prepared by spark plasma sintering. Journal of Alloys and Compounds vol. 494 (1-2), 266-270.
01-01-2010
2009
- Grasso S, Sakka Y and Maizza G (2009). Electric current activated/assisted sintering (ECAS): A review of patents 1906-2008. Science and Technology of Advanced Materials vol. 10 (5)
01-01-2009 - Hu C, Sakka Y, Tanaka H, Nishimura T and Grasso S (2009). Low temperature thermal expansion, high temperature electrical conductivity, and mechanical properties of Nb4AlC3 ceramic synthesized by spark plasma sintering. Journal of Alloys and Compounds vol. 487 (1-2), 675-681.
01-01-2009 - Maizza G, Grasso S and Sakka Y (2009). Moving finite-element mesh model for aiding spark plasma sintering in current control mode of pure ultrafine WC powder. Journal of Materials Science vol. 44 (5), 1219-1236.
01-01-2009