Dr Salvatore Grasso
PhD, MSc, FHEA, MIMMM
All Publications
Page 3 of 5
2018
- Biesuz M, Pinter L, Saunders T, Reece M, Binner J, Sglavo VM and Grasso S (2018). Investigation of Electrochemical, Optical and Thermal Effects during Flash Sintering of 8YSZ. Materials, Mdpi vol. 11 (7)
14-07-2018 - Pinter L, Biesuz M, Sglavo VM, Saunders T, Binner J, Reece M and Grasso S (2018). DC-electro softening in soda lime silicate glass: An electro-thermal analysis. Scripta Materialia, Elsevier vol. 151, 14-18.
01-07-2018 - CASTLE E, Csanádi T, GRASSO S, Dusza J and REECE M (2018). Processing and Properties of High Entropy Ultra-High Temperature Carbides. Scientific Reports, Nature Publishing Group vol. 8, 8609-8609.
05-06-2018
2017
- Zhou J, Zhu D, Zhang H, Bogomol I, Grasso S and Hu C (2017). Microstructure and indentation damage resistance of ZrB2‐20 vol.%SiC ipo‐eutectic composites. International Journal of Applied Ceramic Technology, Wiley vol. 15 (3), 619-624.
21-12-2017 - Yu M, Saunders T, Grasso S, Mahajan A, Zhang H and Reece MJ (2017). Magnéli phase titanium suboxides by Flash Spark Plasma Sintering. Scripta Materialia vol. 146, 241-245.
08-12-2017 - Tatarko P, Grasso S, Saunders TG, Casalegno V, Ferraris M and Reece MJ (2017). Flash joining of CVD-SiC coated Cf/SiC composites with a Ti interlayer. Journal of The European Ceramic Society, Elsevier vol. 37 (13), 3841-3848.
01-10-2017 - Lerdprom W, Bhowmik A, Grasso S, Zapata-Solvas E, Jayaseelan DD, Reece MJ and Lee WE (2017). Impact of spark plasma sintering (SPS) on mullite formation in porcelains. Journal of The American Ceramic Society vol. 101 (2), 525-535.
20-09-2017 - CASTLE E, Sheridan R, Zhou W, Grasso S, Walton A and Reece MJ (2017). High coercivity, anisotropic, heavy rare earth-free Nd-Fe-B by Flash Spark Plasma Sintering., Editors: Li S. Scientific Reports, Nature Publishing Group
11-09-2017 - Zoli L, Vinci A, Silvestroni L, Sciti D, Reece M and Grasso S (2017). Rapid spark plasma sintering to produce dense UHTCs reinforced with undamaged carbon fibres. Materials & Design, Elsevier vol. 130, 1-7.
01-09-2017 - Xu L, Zhu D, Grasso S, Suzuki TS, Kasahara A, Tosa M, Kim B-N, Sakka Y, Zhu M and Hu C (2017). Effect of texture microstructure on tribological properties of tailored Ti3AlC2 ceramic. Journal of Advanced Ceramics, Tsinghua University Press vol. 6 (2), 120-128.
01-06-2017 - Maizza G, Mastrorillo GD, Grasso S, Ning H and Reece MJ (2017). Peltier effect during spark plasma sintering (SPS) of thermoelectric materials. Journal of Materials Science, Springer Nature vol. 52 (17), 10341-10352.
23-05-2017 - Lerdprom W, Grasso S, Jayaseelan DD, Reece MJ and Lee WE (2017). Densification behaviour and physico-mechanical properties of porcelains prepared using spark plasma sintering. Advances in Applied Ceramics vol. 116 (6), 307-315.
05-04-2017 - McKinnon R, Grasso S, Tudball A and Reece MJ (2017). Flash spark plasma sintering of cold-Pressed TiB2-hBN. Journal of The European Ceramic Society vol. 37 (8), 2787-2794.
03-03-2017 - Du B, Gucci F, Porwal H, Grasso S, Mahajan A and Reece MJ (2017). Flash spark plasma sintering of magnesium silicide stannide with improved thermoelectric properties. Journal of Materials Chemistry C vol. 5 (6), 1514-1521.
19-01-2017 - Ghanizadeh S, Grasso S, Ramanujam P, Vaidhyanathan B, Binner J, Brown P and Goldwasser J (2017). Improved transparency and hardness in α-alumina ceramics fabricated by high-pressure SPS of nanopowders. Ceramics International, Elsevier vol. 43 (1), 275-281.
01-01-2017
2016
- Yu M, Grasso S, Mckinnon R, Saunders T and Reece MJ (2016). Review of flash sintering: materials, mechanisms and modelling. Advances in Applied Ceramics, Taylor & Francis vol. 116 (1), 24-60.
09-12-2016 - Cedillos-Barraza O, Manara D, Boboridis K, Watkins T, Grasso S, Jayaseelan DD, Konings RJM, Reece MJ and Lee WE (2016). Investigating the highest melting temperature materials: A laser melting study of the TaC-HfC system. Sci Rep vol. 6, 37962-37962.
01-12-2016 - Stadelmann R, Lugovy M, Orlovskaya N, Mchaffey P, Radovic M, Sglavo VM, Grasso S and Reece MJ (2016). Erratum: Corrigendum to “Mechanical properties and residual stresses in ZrB2–SiC spark plasma sintered ceramic composites” (J. Eur. Ceram. Soc. (2016) 36(7) (1527–1537)). Journal of The European Ceramic Society vol. 36 (14), 3545-3545.
01-11-2016 - Wang C, Wu D, Grasso S, Saunders T, Castle E, Yan H and Reece MJ (2016). Growth of SiC platelets using contactless flash technique. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of The Ceramic Society of Japan vol. 124 (9), 845-847.
01-09-2016 - Grasso S, Saunders T, McKinnon R, Castle E, Tatarko P, Du B, Gucci F, Yu M, Porwal H, Milsom B and Reece M (2016). Spark plasma sintering in a flash. American Ceramic Society Bulletin vol. 95 (7), 32-34.
01-09-2016 - Saunders T, Grasso S and Reece MJ (2016). Ultrafast-Contactless Flash Sintering using Plasma Electrodes. Scientific Reports vol. 6
08-06-2016 - CASTLE E, Grasso S, Reece MJ, Sheridan R and Walton A (2016). Rapid Sintering of Anisotropic, Nanograined Nd-Fe-B by Flash-Spark Plasma Sintering. Journal of Magnetism and Magnetic Materials
26-05-2016 - Porwal H, Saggar R, Tatarko P, Grasso S, Saunders T, Dlouhý I and Reece MJ (2016). Effect of lateral size of graphene nano-sheets on the mechanical properties and machinability of alumina nano-composites. Ceramics International, Elsevier vol. 42 (6), 7533-7542.
01-05-2016 - Grasso S, Saunders T, Porwal H, Milsom B, Tudball A and Reece M (2016). Flash Spark Plasma Sintering (FSPS) of α and β SiC. Journal of The American Ceramic Society, Wiley vol. 99 (5), 1534-1543.
28-02-2016 - Grasso S, Kim E-Y, Saunders T, Yu M, Tudball A, Choi S-H and Reece M (2016). Ultra-Rapid Crystal Growth of Textured SiC Using Flash Spark Plasma Sintering Route. Crystal Growth and Design, American Chemical Society vol. 16 (4), 2317-2321.
16-02-2016 - Cedillos-Barraza O, Grasso S, Nasiri NA, Jayaseelan DD, Reece MJ and Lee WE (2016). Sintering behaviour, solid solution formation and characterisation of TaC, HfC and TaC-HfC fabricated by spark plasma sintering. Journal of The European Ceramic Society vol. 36 (7), 1539-1548.
13-02-2016 - Horlait D, Grasso S, Chroneos A and Lee WE (2016). Attempts to synthesise quaternary MAX phases (Zr,M)2AlC and Zr2(Al,A)C as a way to approach Zr2AlC. Materials Research Letters, Taylor & Francis vol. 4 (3), 137-144.
09-02-2016 - Csanádi T, Szommer P, Chinh NQ, Grasso S, Dusza J and Reece M (2016). Plasticity in ZrB2 micropillars induced by anomalous slip activation. Journal of The European Ceramic Society, Elsevier vol. 36 (3), 389-394.
01-02-2016 - Stadelmann R, Lugovy M, Orlovskaya N, Mchaffey P, Radovic M, Sglavo VM, Grasso S and Reece MJ (2016). Mechanical properties and residual stresses in ZrB2–SiC spark plasma sintered ceramic composites. Journal of The European Ceramic Society vol. 36 (7), 1527-1537.
22-01-2016 - Csanádi T, Grasso S, Kovalčíková A, Dusza J and Reece M (2016). Nanohardness and elastic anisotropy of ZrB2 crystals. Journal of The European Ceramic Society, Elsevier vol. 36 (1), 239-242.
01-01-2016
2015
- Stadelmann R, Hughes B, Orlovskaya N, Grasso S and Reece MJ (2015). 2D Raman mapping and thermal residual stresses in SiC grains of ZrB2–SiC ceramic composites. Ceramics International, Elsevier vol. 41 (10), 13630-13637.
01-12-2015 - Saunders T, Grasso S and Reece MJ (2015). Limiting oxidation of ZrB2 by application of an electric field across its oxide scale. Journal of Alloys and Compounds, Elsevier vol. 653, 629-635.
01-12-2015 - Horlait D, Grasso S, Al Nasiri N, Burr PA and Lee WE (2015). Synthesis and Oxidation Testing of MAX Phase Composites in the Cr–Ti–Al–C Quaternary System. Journal of The American Ceramic Society, Wiley vol. 99 (2), 682-690.
19-10-2015 - Porwal H, Kasiarova M, Tatarko P, Grasso S, Dusza J and Reece MJ (2015). Scratch behaviour of graphene alumina nanocomposites. Advances in Applied Ceramics, Sage Publications vol. 114 (1_suppl), 34-41.
14-08-2015 - Hu CF, Kim BN, Park YJ, Morita K, Yoshida H, Grasso S, Zhang HB, Guo SQ and Sakka Y (2015). Microstructure and mechanical properties of nano ZrO2-10 vol.% tin composite fabricated by spark plasma sintering. Journal of Ceramic Processing Research vol. 16 (3), 281-286.
24-07-2015 - Mansour FA, Karpukhina N, Grasso S, Wilson RM, Reece MJ and Cattell MJ (2015). The effect of spark plasma sintering on lithium disilicate glass-ceramics. Dental Materials, Elsevier vol. 31 (10), e226-e235.
23-07-2015 - Porwal H, Estili M, Grünewald A, Grasso S, Detsch R, Hu C, Sakka Y, Boccaccini AR and Reece MJ (2015). 45S5 Bioglass®–MWCNT composite: processing and bioactivity. Journal of Materials Science: Materials in Medicine, Springer Nature vol. 26 (6)
01-06-2015 - Gao Z, Suzuki TS, Grasso S, Sakka Y and Reece MJ (2015). Highly anisotropic single crystal-like La2Ti2O7 ceramic produced by combined magnetic field alignment and templated grain growth. Journal of The European Ceramic Society, Elsevier vol. 35 (6), 1771-1776.
01-06-2015 - Mani MK, Viola G, Hall JP, Grasso S and Reece MJ (2015). Observation of Curie transition during spark plasma sintering of ferromagnetic materials. Journal of Magnetism and Magnetic Materials, Elsevier vol. 382, 202-205.
01-05-2015 - Saunders T, Grasso S and Reece MJ (2015). Plasma formation during electric discharge (50V) through conductive powder compacts. Journal of The European Ceramic Society, Elsevier vol. 35 (3), 871-877.
01-03-2015 - Ning H, Mastrorillo GD, Grasso S, Du B, Mori T, Hu C, Xu Y, Simpson K, Maizza G and Reece MJ (2015). Enhanced thermoelectric performance of porous magnesium tin silicide prepared using pressure-less spark plasma sintering. Journal of Materials Chemistry A, Royal Society of Chemistry (Rsc) vol. 3 (33), 17426-17432.
01-01-2015 - HU C-F, KIM B-N, PARK Y-J, ESTILI M, GRASSO S, MORITA K, YOSHIDA H, NISHIMURA T, GUO S-Q and SAKKA Y (2015). Nano ZrO2–TiN composites with high strength and conductivity. Journal of The Ceramic Society of Japan, Ceramic Society of Japan vol. 123 (1434)
01-01-2015 - Zhang HB, Hu CF, Sato K, Grasso S, Estili M, Guo SQ, Morita K, Yoshida H, Nishimura T, Suzuki TS, Barsoum MW, Kim BN and Sakka Y (2015). Tailoring Ti3AlC2 ceramic with high anisotropic physical and mechanical properties. Journal of The European Ceramic Society, Elsevier vol. 35 (1), 393-397.
01-01-2015 - Zhang HB, Hu CF, Sato K, Grasso S, Estili M, Guo SQ, Morita K, Yoshida H, Nishimura T, Suzuki TS, Barsoum MW, Kim BN and Sakka Y (2015). Tailoring Ti3AlC2 ceramic with high anisotropic physical and mechanical properties. Journal of The European Ceramic Society vol. 35 (1), 393-397.
01-01-2015 - Zhang HB, Hu CF, Sato K, Grasso S, Estili M, Guo SQ, Morita K, Yoshida H, Nishimura T, Suzuki TS, Barsoum MW, Kim BN and Sakka Y (2015). Tailoring Ti3AlC2 ceramic with high anisotropic physical and mechanical properties. Journal of The European Ceramic Society vol. 35 (1), 393-397.
01-01-2015
2014
- Zhang H, Hu C, Lv J, Grasso S, Mishra M, Estili M, Yamauchi Y, Kim B and Sakka Y (2014). Microstructure and adsorption property of nanocarbide-derived carbon (CDC) synthesized at ambient temperature. Materials Letters vol. 130, 188-191.
01-09-2014 - Maizza G, Grasso S and Sakka Y (2014). Systematic study on densification of alumina fine powder during milliwave sintering at 28GHz. Journal of Asian Ceramic Societies, Taylor & Francis vol. 2 (3), 215-222.
01-09-2014 - GRASSO S (2014). Ultra-high temperature spark plasma sintering of α-SiC. Ceramics International, Elsevier
23-08-2014 - Tatarko P, Grasso S, Chlup Z, Porwal H, Kašiarová M, Dlouhý I and Reece MJ (2014). Toughening effect of multi-walled boron nitride nanotubes and their influence on the sintering behaviour of 3Y-TZP zirconia ceramics. Journal of The European Ceramic Society vol. 34 (7), 1829-1843.
01-07-2014 - Porwal H, Grasso S, Cordero-Arias L, Li C, Boccaccini AR and Reece MJ (2014). Processing and bioactivity of 45S5 Bioglass(®)-graphene nanoplatelets composites. J Mater Sci Mater Med vol. 25 (6), 1403-1413.
01-06-2014