Prof James Busfield
FREng, MA, PhD, CEng, FIMMM, FHEA
All Publications
Page 4 of 4
2008
- Multifunctional elastomer nanocomposites based on EPDM and carbon nanotubes
Ciselli P, Lu L, Busfield JJC, Peijs T
Materials Research Society Symposium Proceedings vol. 1137, 61-72.
01-12-2008 - Rate transitions in the fatigue crack growth of elastomers
Papadopoulos IC, Thomas AG, Busfield JJC
Journal of Applied Polymer Science vol. 109 (3), 1900-1910.
05-08-2008 - Criteria for crack initiation during rubber abrasion
Fukahori Y, Liang H, Busfield JJC
Wear vol. 265 (3-4), 387-395.
31-07-2008 - Modeling of the effect of rigid fillers on the stiffness of rubbers
Jha V, Hon AA, Thomas AG, Busfield JJC
Journal of Applied Polymer Science vol. 107 (4), 2572-2577.
15-02-2008 - Multifunctional Elastomer Nanocomposites based on EPDM and Carbon Nanotubes
Ciselli P, Lu L, Busfield JJC, Peijs T
Mrs Advances, Springer Nature vol. 1143 (1)
01-01-2008 - Multifunctional elastomer nanocomposites based on EPDM and carbon nanotubes
Ciselli P, Lu L, Busfield JJC, Peijs T
Materials Research Society Symposium Proceedings vol. 1143, 31-42.
01-01-2008
2007
- Volume changes under strain resulting from the incorporation of rubber granulates into a rubber matrix
Kumar P, Fukahori Y, Thomas AG, Busfield JJC
Journal of Polymer Science Part B Polymer Physics vol. 45 (23), 3169-3180.
01-12-2007 - Recycled rubber: The rubber granulate - Virgin rubber interface
Kumar P, Fukahori Y, Thomas AG, Busfield JJC
Rubber Chemistry and Technology vol. 80 (1), 24-39.
01-01-2007
2006
- Selection of elastomers for a synthetic heart valve
Baxter S, Busfield JJC, Peijs T
, 171-177.
30-10-2006 - Using FEA techniques to predict fatigue failure in elastomers
Busfield JJC, Ng WH
, 179-193.
30-10-2006 - Appendix: Contact Details for Authors
Abraham F, Albihn P, Alshuth T, Azura AR, Busfield J, Campion R, Clotet M, Cook P et al.
In Elastomers and Components, Elsevier 227-230.
01-01-2006 - Chapter 12 Selection of Elastomers for a Synthetic Heart Valve
Baxter S, Busfield JJC, Peijs T
In Elastomers and Components, Elsevier 171-177.
01-01-2006 - Chapter 13 Using FEA Techniques to Predict Fatigue Failure in Elastomers
Busfield JJC, Ng WH
In Elastomers and Components, Elsevier 179-193.
01-01-2006 - The Rubber in Engineering Series IOM3
Boast D, Busfield JJC, Coveney VA, Hepburn C, Muhr AH, Whear R
In Elastomers and Components, Elsevier
01-01-2006
2005
- Prediction of fatigue crack growth using finite element analysis techniques applied to three-dimensional elastomeric components
Busfield JJC, Jha V, Liang H, Papadopoulos IC, Thomas AG
Plastics Rubber and Composites vol. 34 (8), 349-356.
15-12-2005 - Investigation of interfacial slippage on filler reinforcement in carbon-black filled elastomers
Busfield JJC, Jha V, Hon AA, Thomas AG
Constitutive Models For Rubber Iv Proceedings of The 4th European Conference For Constitutive Models For Rubber Eccmr 2005, 459-464.
01-12-2005 - Modelling the abrasion process in elastomer materials
Busfield JJC, Liang H, Fukahori Y, Thomas AG
Constitutive Models For Rubber Iv Proceedings of The 4th European Conference For Constitutive Models For Rubber Eccmr 2005, 139-143.
01-12-2005 - Transitions in tear and fatigue crack growth in elastomers
Busfield JJC, Papadopoulos IC, Thomas AG
Constitutive Models For Rubber Iv Proceedings of The 4th European Conference For Constitutive Models For Rubber Eccmr 2005, 145-151.
01-12-2005 - Electrical and mechanical behavior of filled rubber. III. Dynamic loading and the rate of recovery
Busfield JJC, Thomas AG, Yamaguchi K
Journal of Polymer Science Part B Polymer Physics vol. 43 (13), 1649-1661.
01-07-2005
2004
- Electrical and mechanical behavior of filled elastomers 2: The effect of swelling and temperature
Busfield JJC, Thomas AG, Yamaguchi K
Journal of Polymer Science Part B Polymer Physics vol. 42 (11 SPEC. ISS.), 2161-2167.
01-06-2004
2003
- Electrical and mechanical behavior of filled elastome. I. The effect of strain
Yamaguchi K, Busfield JJC, Thomas AG
Journal of Polymer Science Part B Polymer Physics vol. 41 (17), 2079-2089.
01-09-2003 - Constitutive models for rubber III : proceedings of the Third European Conference on Constitutive Models for Rubber, 15-17 September 2003, London, UK
BUSFIELD JJC, Muhr AH
Balkema
01-01-2003
2002
- Contributions of time dependent and cyclic crack growth to the crack growth behavior of non strain-crystallizing elastomers
Busfield JJC, Tsunoda K, Davies CKL, Thomas AG
Rubber Chemistry and Technology vol. 75 (4), 643-656.
01-01-2002
2001
- Stiffness of simple bonded elastomer bushes Part 1 - Initial behaviour
Busfield JJC, Davies CKL
Plast Rubber Compos vol. 30 (5), 243-257.
01-01-2001
2000
- Effect of materials variables on the tear behaviour of a non-crystallising elastomer
Tsunoda K, Busfield JJC, Davies CKL, Thomas AG
J Mater Sci vol. 35 (20), 5187-5198.
01-10-2000 - The effect of liquids on the dynamic properties of carbon black filled natural rubber as a function of pre-strain
Busfield JJC, Deeprasertkul C, Thomas AG
Polymer vol. 41 (26), 9219-9225.
14-09-2000 - Microstructure of ceramic foams
Peng HX, Fan Z, Evans JRG, Busfield JJC
Journal of The European Ceramic Society vol. 20 (7), 807-813.
01-06-2000
1999
- Indentation tests on elastomer blocks
Busfield JJC, Thomas AG
Rubber Chemistry and Technology vol. 72 (5), 876-893.
01-01-1999
1998
- Finite-element-assisted modelling of a thermoplastic pultrusion process for powder-impregnated yarn
Haffner SM, Friedrich K, Hogg PJ, Busfield JJC
Composites Science and Technology vol. 58 (8), 1371-1380.
01-08-1998 - Finite Element Assisted Modelling of the Microscopic Impregnation Process in Thermoplastic Preforms
Haffner SM, Friedrich K, Hogg PJ, Busfield JJC
Applied Composite Materials vol. 5 (4), 237-255.
01-01-1998
1996
- Aspects of Fracture in Rubber Components
Busfield JJC, Davies CKL, Thomas AG
Progress in Rubber Plastics and Recycling Technology, Sage Publications vol. 12 (3), 191-207.
01-08-1996