Dr Chinnapat Panwisawas
BSc, PhD, CEng, FIMMM, FInstP, FIMechE
Key Publications
- Zhang K, Chen Y, Marussi S, Fan X, Fitzpatrick M, Bhagavath S, Majkut M, Lukic B, Jakata K, Rack A, Jones MA, Shinjo J, Panwisawas C, Leung CLA and Lee PD (2024). Pore evolution mechanisms during directed energy deposition additive manufacturing. Springer Nature: Nature Communications vol. 15 (1), 1715-1715.
24-02-2024 - Ren N, Li J, Zhang R, Panwisawas C, Xia M and Dong H (2023). Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing. Springer Nature: Nature Communications vol. 14 (1), 7990-7990.
02-12-2023 - Shinjo J and Panwisawas C (2022). Chemical species mixing during direct energy deposition of bimetallic systems using titanium and dissimilar refractory metals for repair and biomedical applications. Elsevier: Additive Manufacturing vol. 51
01-03-2022 - Shinjo J and Panwisawas C (2021). Digital materials design by thermal-fluid science for multi-metal additive manufacturing. Elsevier: Acta Materialia vol. 210
01-05-2021 - Panwisawas C, Tang YT and Reed RC (2020). Metal 3D printing as a disruptive technology for superalloys. Springer Nature: Nature Communications vol. 11 (1)
11-05-2020
All Publications
Page 1 of 2
2024
- Zhang K, Chen Y, Marussi S, Fan X, Fitzpatrick M, Bhagavath S, Majkut M, Lukic B, Jakata K, Rack A, Jones MA, Shinjo J, Panwisawas C, Leung CLA and Lee PD (2024). Pore evolution mechanisms during directed energy deposition additive manufacturing. Nature Communications, Springer Nature vol. 15 (1), 1715-1715.
24-02-2024 - Shinjo J, Kutsukake A, Wakabayashi H, Arakawa K, Ogawara A, Uchida H, Panwisawas C and Reed RC (2024). In-process monitoring and direct simulation of Argon shielding gas and vapour dynamics to control laser-matter interaction in laser powder bed fusion additive manufacturing. Additive Manufacturing, Elsevier vol. 80, 103953-103953.
04-01-2024
2023
- Ren N, Li J, Zhang R, Panwisawas C, Xia M and Dong H (2023). Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing. Nature Communications, Springer Nature vol. 14 (1), 7990-7990.
02-12-2023 - Hajra RN, Panwisawas C, Park JW, Choo W, Han BJ and Kim JH (2023). High-temperature phase stability and phase transformation of NbCr2 Laves phase: Experimental and first-principles calculation studies. Materials and Design, Elsevier, 112483-112483.
01-11-2023 - Yang L, Ren N, Panwisawas C, Li J, Xia M and Dong H (2023). Melt Flow-Induced Mechanical Deformation and Fracture Behaviour of Dendrites in Alloy Solidification. Metallurgical and Materials Transactions A, Springer Nature
12-10-2023 - Win TT, Panwisawas C, Jongvivatsakul P, Pansuk W and Prasittisopin L (2023). Effects of Fly Ash Composition to Mitigate Conversion of Calcium Aluminate Cement Composites. Buildings, Mdpi vol. 13 (10), 2453-2453.
27-09-2023 - Zhang G, Chen G, Panwisawas C, Teng X, Ma Y, An R, Huang Y, Cao J and Leng X (2023). First-principles study of oxygen segregation and its effect on the embrittlement of molybdenum symmetrical tilt grain boundaries. Acta Materialia, Elsevier vol. 261, 119387-119387.
25-09-2023 - Guoqing D, Xue M, Guo Y, Chang H, Sun Z, Lu J, Li W, Panwisawas C and Alexandrov IV (2023). Gradient microstructure and strength-ductility synergy improvement of 2319 aluminum alloys by hybrid additive manufacturing. Journal of Alloys and Compounds, Elsevier vol. 968, 171781-171781.
18-08-2023 - Yang L, Ren N, Panwisawas C, Li J, Xia M and Dong H (2023). Melt flow-induced mechanical deformation of dendrites in alloy solidification: A coupled thermal fluid - solid mechanics approach. Journal of Materials Research and Technology, Elsevier vol. 25, 4094-4109.
07-07-2023 - Lu Z, Ren N, Xu X, Li J, Panwisawas C, Xia M, Dong H and Tsang E (2023). Real-time prediction and adaptive adjustment of continuous casting based on deep learning. Communications Engineering, Springer Nature vol. 2 (1)
07-06-2023 - Ren N, Li J, Panwisawas C, Xia M and Dong H (2023). Simulation of the solute transport and microstructure evolution during the selective laser melting process. Iop Conference Series Materials Science and Engineering, Iop Publishing vol. 1281 (1)
01-05-2023 - Dai G, Sun Z, Li Y, Jain J, Bhowmik A, Shinjo J, Lu J and Panwisawas C (2023). Grain refinement and columnar-to-equiaxed transition of Ti6Al4V during additive manufacturing via different laser oscillations. International Journal of Machine Tools and Manufacture, Elsevier, 104031-104031.
29-04-2023 - Sereewatthanawut I, Panwisawas C, Ngamkhanong C and Prasittisopin L (2023). Effects of extended mixing processes on fresh, hardened and durable properties of cement systems incorporating fly ash. Scientific Reports, Springer Nature vol. 13, 6091-6091.
13-04-2023 - Abdu Aliyu AA, Panwisawas C, Shinjo J, Puncreobutr C, Reed RC, Poungsiri K and Lohwongwatana B (2023). Laser-based Additive Manufacturing of Bulk Metallic Glasses: Recent Advances and Future Perspectives for Biomedical Applications. Journal of Materials Research and Technology, Elsevier vol. 23, 2956-2990.
02-02-2023 - Aliyu AAA, Poungsiri K, Shinjo J, Panwisawas C, Reed RC, Puncreobutr C, Tumkanon K, Kuimalee S and Lohwongwatana B (2023). Additive manufacturing of tantalum scaffolds: Processing, microstructure and process-induced defects. International Journal of Refractory Metals and Hard Materials, Elsevier Bv, 106132-106132.
26-01-2023 - Shinjo J, Kutsukake A, Arote AS, Tang YT, McCartney DG, Reed RC and Panwisawas C (2023). Physics-based thermal-chemical-fluid-microstructure modelling of in-situ alloying using additive manufacturing: Composition-microstructure control. Additive Manufacturing, Elsevier Bv, 103428-103428.
25-01-2023 - Rui WANG, Jiang WANG, Tingwei CAO, Ruixin ZHAO, Lu X, Wei GUAN, Tao HU, SHUAI S, Songzhe XU, Weidong XUAN, PANWISAWAS C, Chaoyue CHEN and Zhongming REN (2023). Microstructure characteristics of a René N5 Ni-based single-crystal superalloy prepared by laser-directed energy deposition. Additive Manufacturing, Elsevier, 103363-103363.
14-01-2023 - Tang YT, Panwisawas C, Jenkins BM, Liu J, Shen Z, Salvati E, Gong Y, Ghoussoub JN, Michalik S, Roebuck B, Bagot PAJ, Lozano-Perez S, Grovenor CRM, Moody MP, Korsunsky AM, Collins DM and Reed RC (2023). Multi-length-scale study on the heat treatment response to supersaturated nickel-based superalloys: Precipitation reactions and incipient recrystallisation. Additive Manufacturing, Elsevier, 103389-103389.
07-01-2023
2022
- Fuyang C, Gong J, Wang X, Panwisawas C and Chen B (2022). A physics-based life prediction model of HP40Nb heat-resistant alloy in a coupled creep-carburisation environment. Materials Science and Engineering: A, Elsevier vol. 860, 144260-144260.
15-11-2022 - Zhang RY, Qin HL, Bi ZN, Tang YT, de Oliveira JA, Lee TL, Panwisawas C, Zhang SY, Zhang J, Li J and Dong HB (2022). γ″ variant-sensitive deformation behaviour of Inconel 718 superalloy. Journal of Material Science and Technology, Elsevier vol. 126, 169-181.
01-11-2022 - Jamshidi P, Panwisawas C, Langi E, Cox SC, Feng J, Zhao L and Attallah MM (2022). Development, characterisation, and modelling of processability of nitinol stents using laser powder bed fusion. Journal of Alloys and Compounds, Elsevier vol. 909
01-07-2022 - Aliyu AAA, Udomlertpreecha S, Medhisuwakul M, Panwisawas C, Reed R, Puncreobutr C, Khamwannah J, Kuimalee S, Yipyintum C and Lohwongwatana B (2022). A new toxic-free Ti40Zr10Co36Pd14 metallic glass with good biocompatibility and surface behaviour comparable to Ti-6Al-4V. Materials & Design, Elsevier vol. 218
01-06-2022 - Ren N, Li J, Panwisawas C, Xia M and Dong H (2022). Insight into the sensitivities of freckles in the directional solidification of single-crystal turbine blades. Journal of Manufacturing Processes, Elsevier vol. 77, 219-228.
01-05-2022 - Nenchev B, Panwisawas C, Yang X, Fu J, Dong Z, Tao Q, Gebelin JC, Dunsmore A, Dong H, Li M, Tao B, Li F, Ru J and Wang F (2022). Metallurgical Data Science for Steel Industry: A Case Study on Basic Oxygen Furnace. Steel Research International vol. 93 (12)
28-04-2022 - Nenchev B, Tao Q, Dong Z, Panwisawas C, Li H, Tao B and Dong H (2022). Evaluating data-driven algorithms for predicting mechanical properties with small datasets: A case study on gear steel hardenability. International Journal of Minerals, Metallurgy and Materials, Springer Nature vol. 29 (4), 836-847.
01-04-2022 - Daungwilailuk T, Yenchai C, Rungjaroenkiti W, Pheinsusom P, Panwisawas C and Pansuk W (2022). Use of barite concrete for radiation shielding against gamma-rays and neutrons. Construction and Building Materials, Elsevier vol. 326
01-04-2022 - Shinjo J and Panwisawas C (2022). Chemical species mixing during direct energy deposition of bimetallic systems using titanium and dissimilar refractory metals for repair and biomedical applications. Additive Manufacturing, Elsevier vol. 51
01-03-2022 - 淳史 新 and Panwisawas C (2022). その場合金化金属積層造形における溶融・混合・蒸発・凝固のプロセス最適化に向けた流動特性の数値解析. The Proceedings of The Fluids Engineering Conference, Japan Society of Mechanical Engineers vol. 2022, os11-os08.
01-01-2022
2021
- Panwisawas C, Gong Y, Tang YT, Reed RC and Shinjo J (2021). Additive manufacturability of superalloys: Process-induced porosity, cooling rate and metal vapour. Additive Manufacturing, Elsevier vol. 47
01-11-2021 - Ren N, Panwisawas C, Li J, Xia M and Dong H (2021). Solute enrichment induced dendritic fragmentation in directional solidification of nickel-based superalloys. Acta Materialia, Elsevier vol. 215
01-08-2021 - Shinjo J and Panwisawas C (2021). Digital materials design by thermal-fluid science for multi-metal additive manufacturing. Acta Materialia, Elsevier vol. 210
01-05-2021 - Suwanpreecha C, Alabort E, Tang YT, Panwisawas C, Reed RC and Manonukul A (2021). A novel low-modulus titanium alloy for biomedical applications: A comparison between selective laser melting and metal injection moulding. Materials Science and Engineering A, Elsevier vol. 812
01-04-2021 - Ren N, Li J, Panwisawas C, Xia M and Dong H (2021). Thermal-solutal-fluid flow of channel segregation during directional solidification of single-crystal nickel-based superalloys. Acta Materialia, Elsevier vol. 206
01-03-2021 - Luo D, Xiao Y, Hardwick L, Snell R, Way M, Morell XS, Livera F, Ludford N, Panwisawas C, Dong H and Goodall R (2021). High entropy alloys as filler metals for joining. Entropy, Mdpi vol. 23 (1), 1-23.
07-01-2021 - Tang YT, Panwisawas C, Ghoussoub JN, Gong Y, Clark JWG, Németh AAN, McCartney DG and Reed RC (2021). Alloys-by-design: Application to new superalloys for additive manufacturing. Acta Materialia, Elsevier vol. 202, 417-436.
01-01-2021 - Tang YT, D’Souza N, Roebuck B, Karamched P, Panwisawas C and Collins DM (2021). Ultra-high temperature deformation in a single crystal superalloy: Mesoscale process simulation and micromechanisms. Acta Materialia, Elsevier vol. 203
01-01-2021
2020
- Strickland J, Nenchev B, Perry S, Tassenberg K, Gill S, Panwisawas C, Dong H, D'Souza N and Irwin S (2020). On the nature of hexagonality within the solidification structure of single crystal alloys: Mechanisms and applications. Acta Materialia, Elsevier vol. 200, 417-431.
01-11-2020 - Collins DM, D’Souza N, Panwisawas C, Papadaki C, West GD, Kostka A and Kontis P (2020). Spinodal decomposition versus classical γ′ nucleation in a nickel-base superalloy powder: An in-situ neutron diffraction and atomic-scale analysis. Acta Materialia, Elsevier vol. 200, 959-970.
01-11-2020 - Panwisawas C, Tang YT and Reed RC (2020). Metal 3D printing as a disruptive technology for superalloys. Nature Communications, Springer Nature vol. 11 (1)
11-05-2020 - D'Souza N, Roebuck B, Collins DM, West GD and Panwisawas C (2020). Relating micro-segregation to site specific high temperature deformation in single crystal nickel-base superalloy castings. Materials Science and Engineering A, Elsevier vol. 773
01-01-2020
2018
- Basoalto HC, Panwisawas C, Sovani Y, Anderson MJ, Turner RP, Saunders B and Brooks JW (2018). A computational study on the three-dimensional printability of precipitate-strengthened nickel-based superalloys. Proceedings of The Royal Society A, The Royal Society vol. 474 (2220)
01-12-2018 - Turner RP, Panwisawas C, Lu Y, Dhiman I, Basoalto HC and Brooks JW (2018). Neutron tomography methods applied to a nickel-based superalloy additive manufacture build. Materials Letters, Elsevier vol. 230, 109-112.
01-11-2018 - Anderson MJ, Panwisawas C, Sovani Y, Turner RP, Brooks JW and Basoalto HC (2018). Mean-field modelling of the intermetallic precipitate phases during heat treatment and additive manufacture of Inconel 718. Acta Materialia, Elsevier vol. 156, 432-445.
01-09-2018 - Flint TF, Panwisawas C, Sovani Y, Smith MC and Basoalto HC (2018). Prediction of grain structure evolution during rapid solidification of high energy density beam induced re-melting. Materials & Design, Elsevier vol. 147, 200-210.
01-06-2018 - Panwisawas C, Sovani Y, Turner RP, Brooks JW, Basoalto HC and Choquet I (2018). Modelling of thermal fluid dynamics for fusion welding. Journal of Materials Processing Technology, Elsevier vol. 252, 176-182.
01-02-2018
2017
- Panwisawas C, D’Souza N, Collins DM and Bhowmik A (2017). The contrasting roles of creep and stress relaxation in the time-dependent deformation during in-situ cooling of a nickel-base single crystal superalloy. Scientific Reports, Springer Nature vol. 7 (1)
11-09-2017 - Mathur HN, Panwisawas C, Jones CN, Reed RC and Rae CMF (2017). Nucleation of recrystallisation in castings of single crystal Ni-based superalloys. Acta Materialia, Elsevier vol. 129, 112-123.
01-05-2017 - Collins DM, D’Souza N and Panwisawas C (2017). In-situ neutron diffraction during stress relaxation of a single crystal nickel-base superalloy. Scripta Materialia, Elsevier vol. 131, 103-107.
01-04-2017 - Panwisawas C, Perumal B, Ward RM, Turner N, Turner RP, Brooks JW and Basoalto HC (2017). Keyhole formation and thermal fluid flow-induced porosity during laser fusion welding in titanium alloys: Experimental and modelling. Acta Materialia, Elsevier vol. 126, 251-263.
01-03-2017 - Qiu C, D'Souza N, Kelleher J and Panwisawas C (2017). An experimental investigation into the stress and strain development of a Ni-base single crystal superalloy during cooling from solidification. Materials & Design, Elsevier vol. 114, 475-483.
01-01-2017