Centre for Sustainable Engineering

Publications

   2017   |   2016   |   2015   |   2014   |   2013   |   2012   |   2011   |   2010   |   2009   |   2008   |   2007   
  • Briscoe J, Stewart M, Vopson M, Cain M, Weaver PM and Dunn S (2012). "Nanostructured zinc oxide piezoelectric energy generators based on semiconductor P-N junctions." Materials Research Society Symposium Proceedings vol. 1439, 151-156.
    28-12-2012
  • Butler KT and Harding JH (2012). "Atomistic simulation of doping effects on growth and charge transport in Si/Ag interfaces in high-performance solar cells." Physical Review B - Condensed Matter and Materials Physics vol. 86 (24)
    21-12-2012
  • Hasan HS, Peet MJ and Bhadeshia HKDH (2012). "Severe tempering of bainite generated at low transformation temperatures." International Journal of Materials Research vol. 103 (11), 1319-1324.
    03-12-2012
  • Liu J, Yan H, Reece MJ and Jiang K (2012). "Toughening of zirconia/alumina composites by the addition of graphene platelets." Journal of The European Ceramic Society vol. 32 (16), 4185-4193.
    01-12-2012
  • Milsom B, Viola G, Gao Z, Inam F, Peijs T and Reece MJ (2012). "The effect of carbon nanotubes on the sintering behaviour of zirconia." Journal of The European Ceramic Society vol. 32 (16), 4149-4156.
    01-12-2012
  • Slavchov RI and Novev JK (2012). "Surface tension of concentrated electrolyte solutions." Journal of Colloid and Interface Science vol. 387 (1), 234-243.
    01-12-2012
  • Li C, Wei X, Yan H and Reece MJ (2012). "Microwave dielectric properties of La 3Ti 2TaO 11 ceramics with perovskite-like layered structure." Journal of The European Ceramic Society vol. 32 (16), 4015-4020.
    01-12-2012
  • Gao Z, Viola G, Milsom B, Whitaker I, Yan H and Reece MJ (2012). "Kinetics of Densification and Grain Growth of Pure Tungsten During Spark Plasma Sintering." Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science vol. 43 (6), 1608-1614.
    01-12-2012
  • Pak J, Suh DW and Bhadeshia HKDH (2012). "Displacive phase transformation and surface effects associated with confocal laser scanning microscopy." Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science vol. 43 (12), 4520-4524.
    01-12-2012
  • Shen Z, Yan H, Grüner D, Belova LM, Sakamoto Y, Hu J, Nan CW, Höche T and Reece MJ (2012). "Ferroelectric ceramics with enhanced remnant polarization by ordered coalescence of nano-crystals." Journal of Materials Chemistry vol. 22 (44), 23547-23552.
    28-11-2012
  • Ooi S and Bhadeshia HKDH (2012). "Duplex hardening of steels for aeroengine bearings." Isij International vol. 52 (11), 1927-1934.
    27-11-2012
  • Massabuau FCP, Sahonta SL, Trinh-Xuan L, Rhode S, Puchtler TJ, Kappers MJ, Humphreys CJ and Oliver RA (2012). "Morphological, structural, and emission characterization of trench defects in InGaN/GaN quantum well structures." Applied Physics Letters vol. 101 (21)
    19-11-2012
  • Debroy T, De A, Bhadeshia HKDH, Manvatkar VD and Arora A (2012). "Tool durability maps for friction stir welding of an aluminium alloy." Proceedings of The Royal Society a: Mathematical, Physical and Engineering Sciences vol. 468 (2147), 3552-3570.
    08-11-2012
  • Butler KT, Harding JH, Lamers MPWE and Weeber AW (2012). "Stoichiometrically graded SiNx for improved surface passivation in high performance solar cells." Journal of Applied Physics vol. 112 (9)
    01-11-2012
  • Song EJ, Suh DW and Bhadeshia HKDH (2012). "Oxidation of silicon containing steel." Ironmaking and Steelmaking vol. 39 (8), 599-604.
    01-11-2012
  • Kong KTS, Mariatti M, Rashid AA and Busfield JJC (2012). "Effect of processing methods and functional groups on the properties of multi-walled carbon nanotube filled poly(dimethyl siloxane) composites." Polymer Bulletin vol. 69 (8), 937-953.
    01-11-2012
  • Dinesh KKJR, Jiang X, Kirkpatrick MP and Malalasekera W (2012). "Combustion characteristics of H2/N2 and H2/CO syngas nonpremixed flames." International Journal of Hydrogen Energy vol. 37 (21), 16186-16200.
    01-11-2012
  • Dinesh KKJR, Jiang X, Kirkpatrick MP and Malalasekera W (2012). "Combustion characteristics of H-2/N-2 and H-2/CO syngas nonpremixed flames." International Journal of Hydrogen Energy vol. 37 (21), 16186-16200.
    01-11-2012
  • Joo MS, Suh DW, Bae JH, Sanchez Mouriño N, Petrov R, Kestens LAI and Bhadeshia HKDH (2012). "Experiments to separate the effect of texture on anisotropy of pipeline steel." Materials Science and Engineering A vol. 556, 601-606.
    30-10-2012
  • Hassan WAA and Jiang X (2012). "Upscaling and its application in numerical simulation of long‐term CO2 storage." Greenhouse Gases Science and Technology vol. 2 (6), 408-418.
    26-10-2012
  • Al Halwachi HK, Yakovlev DS and Boek ES (2012). "Systematic optimization of asphaltene molecular structure and molecular weight using the quantitative molecular representation approach." Energy and Fuels vol. 26 (10), 6177-6185.
    18-10-2012
  • Lonardelli I, Bortolotti M, Van Beek W, Girardini L, Zadra M and Bhadeshia HKDH (2012). "Powder metallurgical nanostructured medium carbon bainitic steel: Kinetics, structure, and in situ thermal stability studies." Materials Science and Engineering A vol. 555, 139-147.
    15-10-2012
  • Ding M, Fenwick O, Di Stasio F, Ou JY, Sessions N, Jung Y, Cacialli F and Brambilla G (2012). "Efficient light confinement with nanostructured optical microfiber tips." Optics Communications vol. 285 (23), 4688-4697.
    15-10-2012
  • Choi Y, Suh DW and Bhadeshia HKDH (2012). "Retention of ω-ferrite in aluminium-alloyed TRIP-assisted steels." Proceedings of The Royal Society a: Mathematical, Physical and Engineering Sciences vol. 468 (2146), 2904-2914.
    08-10-2012
  • Giesa T, Pugno NM and Buehler MJ (2012). "Natural stiffening increases flaw tolerance of biological fibers." Physical Review E - Statistical, Nonlinear, and Soft Matter Physics vol. 86 (4)
    08-10-2012
  • Khanduri H, Chandra Dimri M, Kooskora H, Heinmaa I, Viola G, Ning H, Reece MJ, Krustok J and Stern R (2012). "Structural, dielectric, magnetic, and nuclear magnetic resonance studies of multiferroic Y-type hexaferrites." Journal of Applied Physics vol. 112 (7)
    01-10-2012
  • Buchan AG, Pain CC, Goddard AJH, Eaton MD, Gomes JLMA, Gorman GJ, Cooling CM, Tollit BS, Nygaard ET, Glenn DE and Angelo PL (2012). "Simulated transient dynamics and heat transfer characteristics of the water boiler nuclear reactor – SUPO – with cooling coil heat extraction." Annals of Nuclear Energy vol. 48, 68-83.
    01-10-2012
  • Lepore E, Pugno F and Pugno NM (2012). "Optimal angles for maximal adhesion in living tokay geckos." Journal of Adhesion vol. 88 (10), 820-830.
    01-10-2012
  • Briscoe J, Stewart M, Vopson M, Cain M, Weaver PM and Dunn S (2012). "Nanostructured p-n junctions for kinetic-to-electrical energy conversion." Advanced Energy Materials vol. 2 (10), 1261-1268.
    01-10-2012
  • Messineo A, Freni G and Volpe R (2012). "Collection of Thermal Energy Available from a Biogas Plant for Leachate Treatment in an Urban Landfill: A Sicilian Case Study." Energies vol. 5 (10), 3753-3767.
    26-09-2012
  • Papageorgiou DG, Bikiaris DN and Chrissafis K (2012). "Effect of crystalline structure of polypropylene random copolymers on mechanical properties and thermal degradation kinetics." Thermochimica Acta vol. 543, 288-294.
    10-09-2012
  • Pandit AS and Bhadeshia HKDH (2012). "Divorced pearlite in steels." Proceedings of The Royal Society a: Mathematical, Physical and Engineering Sciences vol. 468 (2145), 2767-2778.
    08-09-2012
  • Viola G, Ning H, Reece MJ, Wilson R, Correia TM, Weaver P, Cain MG and Yan H (2012). "Reversibility in electric field-induced transitions and energy storage properties of bismuth-based perovskite ceramics." Journal of Physics D: Applied Physics vol. 45 (35)
    05-09-2012
  • Dunstan DJ, Gallé JU, Hou XD, Png KMY, Bushby AJ, Yang B and Kiener D (2012). "Yield and plastic flow of soft metals in small volumes loaded in tension and flexure." Philosophical Magazine vol. 92 (25-27), 3199-3215.
    01-09-2012
  • Rahideh A, Bajodah AH and Shaheed MH (2012). "Real time adaptive nonlinear model inversion control of a twin rotor MIMO system using neural networks." Engineering Applications of Artificial Intelligence vol. 25 (6), 1289-1297.
    01-09-2012
  • Lonardelli I, Girardini L, Maines L, Menapace C, Molinari A and Bhadeshia HKDH (2012). "Nanostructured bainitic steel obtained by powder metallurgy approach: Structure, transformation kinetics and mechanical properties." Powder Metallurgy vol. 55 (4), 256-259.
    01-09-2012
  • Stukan MR, Ligneul P and Boek ES (2012). "Molecular dynamics simulation of spontaneous imbibition in nanopores and recovery of asphaltenic crude oils using surfactants for EOR applications." Oil and Gas Science and Technology vol. 67 (5), 737-742.
    01-09-2012
  • Baumard TLM, Thomas AG and Busfield JJC (2012). "Fatigue peeling at rubber interfaces." Plastics, Rubber and Composites vol. 41 (7), 296-300.
    01-09-2012
  • Busfield J (2012). "Editorial." Plastics, Rubber and Composites vol. 41 (7), 271-272.
    01-09-2012
  • Mellon SJ and Tanner KE (2012). "Bone and its adaptation to mechanical loading: A review." International Materials Reviews vol. 57 (5), 235-255.
    01-09-2012
  • Dinesh KKJR, Jiang X and van Oijen JA (2012). "Analysis of Impinging Wall Effects on Hydrogen Non-Premixed Flame." Combustion Science and Technology vol. 184 (9), 1244-1268.
    01-09-2012
  • Butler KT and Lewis DW (2012). "Calculation of the 29Si NMR chemical shifts of aqueous silicate species." Journal of Physical Chemistry A vol. 116 (34), 8786-8791.
    30-08-2012
  • Briscoe J, Bilotti E and Dunn S (2012). "Measured efficiency of a ZnO nanostructured diode piezoelectric energy harvesting device." Applied Physics Letters vol. 101 (9)
    27-08-2012
  • Bushby AJ, Feuvrier J, Dong DV and Dunstan DJ (2012). "Testing the limits of small scale plasticity with thin wires in torsion." Materials Research Society Symposium Proceedings vol. 1424, 61-65.
    20-08-2012
  • Hardie CD, Roberts SG and Bushby AJ (2012). "Mechanical behavior of ion-irradiated Fe-Cr alloys investigated by spherical indentation." Materials Research Society Symposium Proceedings vol. 1424, 1-6.
    20-08-2012
  • Shi X, Peng B, Pugno NM and Gao H (2012). "Erratum: Stretch-induced softening of bending rigidity in graphene (Applied Physics Letters (2012) 100 (191913))." Applied Physics Letters vol. 101 (8)
    20-08-2012
  • SHAHEED MH and Tokhi O (2012). "Adaptive closed-loop control of a single-link flexible manipulator." Sage Journal Journal of Vibration and Control
    16-08-2012
  • Suter JL, Sprik M and Boek ES (2012). "Free energies of absorption of alkali ions onto beidellite and montmorillonite surfaces from constrained molecular dynamics simulations." Geochimica Et Cosmochimica Acta vol. 91, 109-119.
    15-08-2012
  • Papageorgiou DG and Bakoglidis K (2012). "Use of nanomaterials for the improvement of various industrial and biomedical applications. A review." Journal of Environmental Protection and Ecology vol. 13 (2), 593-602.

    30-07-2012
  • Pak JH, Bhadeshia HKDH and Karlsson L (2012). "Mechanism of misorientation development within coalesced martensite." Materials Science and Technology (United Kingdom) vol. 28 (8), 918-923.
    25-07-2012
  • Chintapalli RK, Marro FG, Milsom B, Reece M and Anglada M (2012). "Processing and characterization of high-density zirconia-carbon nanotube composites." Materials Science and Engineering A vol. 549, 50-59.
    15-07-2012
  • Crick CR, Bear JC, Kafizas A and Parkin IP (2012). "Superhydrophobic photocatalytic surfaces through direct incorporation of titania nanoparticles into a polymer matrix by aerosol assisted chemical vapor deposition." Advanced Materials vol. 24 (26), 3505-3508.
    10-07-2012
  • Badcock TJ, Hao R, Moram MA, Kappers MJ, Dawson P, Oliver RA and Humphreys CJ (2012). "Recombination mechanisms in heteroepitaxial non-polar InGaN/GaN quantum wells." Journal of Applied Physics vol. 112 (1)
    01-07-2012
  • Baker CMJ, Buchan AG, Pain CC, Tollit B, Eaton MD and Warner P (2012). "Quadratic inner element subgrid scale discretisation of the Boltzmann transport equation." Annals of Nuclear Energy vol. 45, 124-137.
    01-07-2012
  • Chaudhry AA, Yan H, Viola G, Reece MJ, Knowles JC, Gong K, Rehman I and Darr JA (2012). "Phase stability and rapid consolidation of hydroxyapatite-zirconia nano-coprecipitates made using continuous hydrothermal flow synthesis." Journal of Biomaterials Applications vol. 27 (1), 79-90.
    01-07-2012
  • Dunstan DJ, Thomas AJ, De Lavau I, Jardin JJ and Bushby AJ (2012). "New experimental test of strain-gradient plasticity theory: Metal foil sandwich structures in flexure." Philosophical Magazine Letters vol. 92 (7), 308-313.
    01-07-2012
  • Jomehzadeh E, Saidi AR and Pugno NM (2012). "Large amplitude vibration of a bilayer graphene embedded in a nonlinear polymer matrix." Physica E: Low-Dimensional Systems and Nanostructures vol. 44 (10), 1973-1982.
    01-07-2012
  • Wu KM and Bhadeshia HKDH (2012). "Extremely fine pearlite by continuous cooling transformation." Scripta Materialia vol. 67 (1), 53-56.
    01-07-2012
  • Patel B, Favaro G, Inam F, Reece MJ, Angadji A, Bonfield W, Huang J and Edirisinghe M (2012). "Cobalt-based orthopaedic alloys: Relationship between forming route, microstructure and tribological performance." Materials Science and Engineering C vol. 32 (5), 1222-1229.
    01-07-2012
  • Tolk M, Fenwick O, Ahmad S and Cacialli F (2012). "The influence of the substrate thermal conductivity on scanning thermochemical lithography." Journal of Applied Physics vol. 111 (12)
    15-06-2012
  • Buchan AG, Pain CC, Umpleby AP and Smedley‐Stevenson RP (2012). "A sub‐grid scale finite element agglomeration multigrid method with application to the Boltzmann transport equation." International Journal For Numerical Methods in Engineering vol. 92 (3), 318-342.
    12-06-2012
  • Tanner KE (2012). "Small but extremely tough." Science vol. 336 (6086), 1237-1238.
    08-06-2012
  • Al Hamdany A, Al Fattal D, Jabbar TA and Bhadeshia HKDH (2012). "Estimation of fracture toughness of tempered nanostructured bainite." Materials Science and Technology (United Kingdom) vol. 28 (6), 685-689.
    08-06-2012
  • Inam F, Reece MJ and Peijs T (2012). "Shortened carbon nanotubes and their influence on the electrical properties of polymer nanocomposites." Journal of Composite Materials vol. 46 (11), 1313-1322.
    01-06-2012
  • Joo MS, Suh DW, Bae JH and Bhadeshia HKDH (2012). "Role of delamination and crystallography on anisotropy of Charpy toughness in API-X80 steel." Materials Science and Engineering A vol. 546, 314-322.
    01-06-2012
  • Pak J, Suh DW and Bhadeshia HKDH (2012). "Promoting the coalescence of bainite platelets." Scripta Materialia vol. 66 (11), 951-953.
    01-06-2012
  • Heo YU, Song YY, Park SJ, Bhadeshia HKDH and Suh DW (2012). "Influence of silicon in low density Fe-C-Mn-Al steel." Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science vol. 43 (6), 1731-1735.
    01-06-2012
  • Ryu JH, Chun YS, Lee CS, Bhadeshia HKDH and Suh DW (2012). "Effect of deformation on hydrogen trapping and effusion in TRIP-assisted steel." Acta Materialia vol. 60 (10), 4085-4092.
    01-06-2012
  • Milner EM, Skipper NT, Howard CA, Shaffer MSP, Buckley DJ, Rahnejat KA, Cullen PL, Heenan RK, Lindner P and Schweins R (2012). "Structure and morphology of charged graphene platelets in solution by small-angle neutron scattering." J Am Chem Soc vol. 134 (20), 8302-8305.
    23-05-2012
  • Boek ES (2012). "12th international conference on petroleum phase behavior and fouling." Energy and Fuels vol. 26 (5)
    17-05-2012
  • Messineo A, Volpe R and Asdrubali F (2012). "Evaluation of Net Energy Obtainable from Combustion of Stabilised Olive Mill By-Products." Energies vol. 5 (5), 1384-1397.
    11-05-2012
  • Li X, Boek ES, Maitland GC and Trusler JPM (2012). "Interfacial tension of (brines + CO 2): CaCl 2(aq), MgCl 2(aq), and Na 2SO 4(aq) at temperatures between (343 and 423) K, pressures between (2 and 50) MPa, and molalities of (0.5 to 5) mol•kg -1." Journal of Chemical and Engineering Data vol. 57 (5), 1369-1375.
    10-05-2012
  • Shi X, Peng B, Pugno NM and Gao H (2012). "Stretch-induced softening of bending rigidity in graphene." Applied Physics Letters vol. 100 (19)
    07-05-2012
  • Sun J, He YL, Tao WQ, Rose JW and Wang HS (2012). "Multi-scale study of liquid flow in micro/nanochannels: Effects of surface wettability and topology." Microfluidics and Nanofluidics vol. 12 (6), 991-1008.
    01-05-2012
  • Meneghini M, Vaccari S, Trivellin N, Zhu D, Humphreys C, Butendheich R, Leirer C, Hahn B, Meneghesso G and Zanoni E (2012). "Analysis of defect-related localized emission processes in InGaN/GaN-based LEDs." Ieee Transactions On Electron Devices vol. 59 (5), 1416-1422.
    01-05-2012
  • Lawal KA, Crawshaw JP, Boek ES and Vesovic V (2012). "Experimental investigation of asphaltene deposition in capillary flow." Energy and Fuels vol. 26 (4), 2145-2153.
    19-04-2012
  • Hammersley S, Watson-Parris D, Dawson P, Godfrey MJ, Badcock TJ, Kappers MJ, McAleese C, Oliver RA and Humphreys CJ (2012). "The consequences of high injected carrier densities on carrier localization and efficiency droop in InGaN/GaN quantum well structures." Journal of Applied Physics vol. 111 (8)
    15-04-2012
  • Li X, Boek E, Maitland GC and Trusler JPM (2012). "Interfacial tension of (Brines + CO2): (0.864 NaCl + 0.136 KCl) at temperatures between (298 and 448) K, pressures between (2 and 50) MPa, and total molalities of (1 to 5) mol·kg-1." Journal of Chemical and Engineering Data vol. 57 (4), 1078-1088.
    12-04-2012
  • Tan PH, Han WP, Zhao WJ, Wu ZH, Chang K, Wang H, Wang YF, Bonini N, Marzari N, Pugno N, Savini G, Lombardo A and Ferrari AC (2012). "The shear mode of multilayer graphene." Nature Materials vol. 11 (4), 294-300.
    01-04-2012
  • Tunnicliffe LB, Thomas AG and Busfield JJC (2012). "Silica-rubber microstructure visualised in three dimensions by focused ion beam-scanning electron microscopy." Journal of Microscopy vol. 246 (1), 77-82.
    01-04-2012
  • Rahideh A and Shaheed MH (2012). "Constrained output feedback model predictive control for nonlinear systems." Control Engineering Practice vol. 20 (4), 431-443.
    01-04-2012
  • Chen Q and Pugno NM (2012). "Competition between in-plane buckling and bending collapses in nanohoneycombs." Epl vol. 98 (1)
    01-04-2012
  • Rozana MD, Reece MJ, Latif F, Wahid MH, Avshad AN and Sanp MN (2012). "Effect of PTFE and OTS on the ferroelectric properties of PVDF-TRFE thin films." World Applied Sciences Journal vol. 16 (9), 1196-1202.

    29-03-2012
  • Sengupta A, Hammond PS, Frenkel D and Boek ES (2012). "Error analysis and correction for Lattice Boltzmann simulated flow conductance in capillaries of different shapes and alignments." Journal of Computational Physics vol. 231 (6), 2634-2640.
    20-03-2012
  • Rahman G, Gee Kim I and Bhadeshia HKDH (2012). "A first-principles investigation on the effects of magnetism on the Bain transformation of -phase FeNi systems." Journal of Applied Physics vol. 111 (6)
    15-03-2012
  • Cheng Y, Shi X, Pugno NM and Gao H (2012). "Substrate-supported carbon nanoscroll oscillator." Physica E: Low-Dimensional Systems and Nanostructures vol. 44 (6), 955-959.
    01-03-2012
  • Lepore E, Faraldi P, Bongini D, Boarino L and Pugno N (2012). "Plasma and thermoforming treatments to tune the bio-inspired wettability of polystyrene." Composites Part B: Engineering vol. 43 (2), 681-690.
    01-03-2012
  • Dinesh KKJR, Jiang X and van Oijen JA (2012). "Numerical simulation of hydrogen impinging jet flame using flamelet generated manifold reduction." International Journal of Hydrogen Energy vol. 37 (5), 4502-4515.
    01-03-2012
  • Amari H, Kappers MJ, Humphreys CJ, Chèze C and Walther T (2012). "Measurement of the Al content in AlGaN epitaxial layers by combined energy-dispersive X-ray and electron energy-loss spectroscopy in a transmission electron microscope." Physica Status Solidi (C) Current Topics in Solid State Physics vol. 9 (3-4), 1079-1082.
    01-03-2012
  • Raucci MG, Gloria A, De Santis R, Ambrosio L and Tanner E (2012). "Introduction to biomaterials for spinal surgery."
    01-03-2012
  • Yang HS, Jang JH, Bhadeshia HKDH and Suh DW (2012). "Critical assessment: Martensite-start temperature for the γ → ε transformation." Calphad: Computer Coupling of Phase Diagrams and Thermochemistry vol. 36, 16-22.
    01-03-2012
  • Pugno NM and Elliott JA (2012). "Buckling of peapods, fullerenes and nanotubes." Physica E: Low-Dimensional Systems and Nanostructures vol. 44 (6), 944-948.
    01-03-2012
  • Bennett SE, Smeeton TM, Saxey DW, Smith GDW, Hooper SE, Heffernan J, Humphreys CJ and Oliver RA (2012). "Atom probe tomography characterisation of a laser diode structure grown by molecular beam epitaxy." Journal of Applied Physics vol. 111 (5)
    01-03-2012
  • Bosia F, Abdalrahman T and Pugno NM (2012). "Investigating the role of hierarchy on the strength of composite materials: Evidence of a crucial synergy between hierarchy and material mixing." Nanoscale vol. 4 (4), 1200-1207.
    21-02-2012
  • Vickers ME, Hollander JL, McAleese C, Kappers MJ, Moram MA and Humphreys CJ (2012). "Determination of the composition and thickness of semi-polar and non-polar III-nitride films and quantum wells using X-ray scattering." Journal of Applied Physics vol. 111 (4)
    15-02-2012
  • Baumard TLM, Thomas AG, Ding W and Busfield JJC (2012). "Fatigue peeling of rubber." Constitutive Models For Rubber Vii - Proceedings of The 7th European Conference On Constitutive Models For Rubber, Eccmr, 293-297.

    10-02-2012
  • Tunnicliffe LB, Thomas AG and Busfield JJC (2012). "Energy losses at small strains in filled rubbers." Constitutive Models For Rubber Vii - Proceedings of The 7th European Conference On Constitutive Models For Rubber, Eccmr, 63-67.

    10-02-2012
  • Sakulkaew K, Thomas AG and Busfield JJC (2012). "A new approach to characterize the onset tearing in rubber." Constitutive Models For Rubber Vii - Proceedings of The 7th European Conference On Constitutive Models For Rubber, Eccmr, 185-189.

    10-02-2012
  • Lepore E, Marchioro A, Isaia M, Buehler MJ and Pugno NM (2012). "Evidence of the most stretchable egg sac silk stalk, of the European spider of the year Meta menardi." Plos One vol. 7 (2)
    08-02-2012
  • Cranford SW, Tarakanova A, Pugno NM and Buehler MJ (2012). "Nonlinear material behaviour of spider silk yields robust webs." Nature vol. 482 (7383), 72-76.
    02-02-2012
  • Bhadeshia HKDH (2012). "Steels for bearings." Progress in Materials Science vol. 57 (2), 268-435.
    01-02-2012
  • Jung GS, Lee KY, Lee JB, Bhadeshia HKDH and Suh DW (2012). "Spot weldability of TRIP assisted steels with high carbon and aluminium contents." Science and Technology of Welding and Joining vol. 17 (2), 92-98.
    01-02-2012
  • Cui B, Sa R, Jayaseelan DD, Inam F, Reece MJ and Lee WE (2012). "Microstructural evolution during high-temperature oxidation of spark plasma sintered Ti 2AlN ceramics." Acta Materialia vol. 60 (3), 1079-1092.
    01-02-2012
  • Reece M (2012). "From the editor." Advances in Applied Ceramics vol. 111 (1-2)
    01-02-2012
  • Fitzgerald CL, Briggs A, Rose JW and Wang HS (2012). "Effect of vapour velocity on condensate retention between fins during condensation on low-finned tubes." International Journal of Heat and Mass Transfer vol. 55 (4), 1412-1418.
    31-01-2012
  • Elsherif OS, Vernon-Parry KD, Dharmadasa IM, Evans-Freeman JH, Airey RJ, Kappers MJ and Humphreys CJ (2012). "Characterization of defects in Mg doped GaN epitaxial layers using conductance measurements." Thin Solid Films vol. 520 (7), 3064-3070.
    31-01-2012
  • Fenwick O, Oliver K and Cacialli F (2012). "Cross-linking of a poly(3,4-ethylene dioxythiophene):(polystyrene sulfonic acid) hole injection layer with a bis-azide salt and the effect of atmospheric processing conditions on device properties." Applied Physics Letters vol. 100 (5)
    30-01-2012
  • Yang HS, Suh DW and Bhadeshia HKDH (2012). "More complete theory for the calculation of the martensite-start temperature in steels." Isij International vol. 52 (1), 164-166.
    23-01-2012
  • Savalani MM, Hao L, Dickens PM, Zhang Y, Tanner KE and Harris RA (2012). "The effects and interactions of fabrication parameters on the properties of selective laser sintered hydroxyapatite polyamide composite biomaterials." Rapid Prototyping Journal vol. 18 (1), 16-27.
    19-01-2012
  • MacDonald T, Gibson CT, Constantopoulos K, Shapter JG and Ellis AV (2012). "Functionalization of vertically aligned carbon nanotubes with polystyrene via surface initiated reversible addition fragmentation chain transfer polymerization." Applied Surface Science vol. 258 (7), 2836-2843.
    15-01-2012
  • Wojtaś M and Reece MJ (2012). "Dynamics of ferroelectric switching of [H3CNH3] 5[Bi2Br11]." Journal of Applied Physics vol. 111 (2)
    15-01-2012
  • Bushby AJ, Roberts SG and Hardie CD (2012). "Nanoindentation investigation of ion-irradiated Fe-Cr alloys using spherical indenters." Journal of Materials Research vol. 27 (1), 85-90.
    14-01-2012
  • Pugno NM, Bosia F and Abdalrahman T (2012). "Erratum: Publisher's Note: Hierarchical fiber bundle model to investigate the complex architectures of biological materials (Physical Review E - Statistical, Nonlinear, and Soft Matter Physics (2012) 85 (011903))." Physical Review E - Statistical, Nonlinear, and Soft Matter Physics vol. 85 (1)
    11-01-2012
  • Bhadeshia HKDH (2012). "Editorial: Bearing steels." Materials Science and Technology vol. 28 (1), 1-2.
    11-01-2012
  • Sun J, He Y, Tao W, Yin X and Wang H (2012). "Roughness effect on flow and thermal boundaries in microchannel/nanochannel flow using molecular dynamics-continuum hybrid simulation." International Journal For Numerical Methods in Engineering vol. 89 (1), 2-19.
    06-01-2012
  • Pugno NM, Bosia F and Abdalrahman T (2012). "Hierarchical fiber bundle model to investigate the complex architectures of biological materials." Physical Review E - Statistical, Nonlinear, and Soft Matter Physics vol. 85 (1)
    05-01-2012
  • Radtke G, Couillard M, Botton GA, Zhu D and Humphreys CJ (2012). "Structure and chemistry of the Si(111)/AlN interface." Applied Physics Letters vol. 100 (1)
    02-01-2012
  • Rendtorff NM, Grasso S, Hu C, Suarez G, Aglietti EF and Sakka Y (2012). "Zircon-zirconia (ZrSiO 4-ZrO 2) dense ceramic composites by spark plasma sintering." Journal of The European Ceramic Society vol. 32 (4), 787-793.
    01-01-2012
  • Bhadeshia HKDH (2012). "Twinning-induced plasticity steels." Scripta Materialia vol. 66 (12)
    01-01-2012
  • Dunstan DJ and Bushby AJ (2012). "The scaling exponent in the size effect of small scale plastic deformation." International Journal of Plasticity
    01-01-2012
  • Gao Z, Ning H, Chen C, Wilson R, Shi B, Ye H, Yan H and Reece MJ (2012). "The Effect of Barium Substitution on the Ferroelectric Properties of Sr2Nb2O7 Ceramics." Journal of The American Ceramic Society
    01-01-2012
  • Messineo A, Panno D and Volpe R (2012). "Technical and Economical Feasibility of Biomass Use for Power Generation in Sicily." International Journal of Agricultural and Environmental Information Systems vol. 3 (1), 40-50.
    01-01-2012
  • Chintapalli RK, Jimenez-Pique E, Marro FG, Yan H, Reece M and Anglada M (2012). "Spherical instrumented indentation of porous nanocrystalline zirconia." Journal of The European Ceramic Society vol. 32 (1), 123-132.
    01-01-2012
  • Grasso S, Hu C, Maizza G and Sakka Y (2012). "Spark plasma sintering of diamond binderless WC composites." Journal of The American Ceramic Society vol. 95 (8), 2423-2428.
    01-01-2012
  • Gao ZP, Yan HX, Ning HP, Wilson R, Wei XY, Shi B, Ye H and Reece MJ (2012). "Piezoelectric and dielectric properties of Ce substituted La2Ti2O7 ceramics." Journal of The European Ceramic Society
    01-01-2012
  • Jorge AB, Sakatani Y, Boissière C, Laberty-Roberts C, Sauthier G, Fraxedas J, Sanchez C and Fuertes A (2012). "Nanocrystalline N-doped ceria porous thin films as efficient visible-active photocatalysts." Journal of Materials Chemistry vol. 22 (7), 3220-3226.
    01-01-2012
  • Sun J, He YL, Tao WQ, Rose JW and Wang HS (2012). "Multi-scale study of liquid flow in micro/nanochannels: Effects of surface wettability and topology." Microfluidics and Nanofluidics vol. 12 (6), 991-1008.
    01-01-2012
  • Badcock TJ, Kappers MJ, Moram MA, Dawson P and Humphreys CJ (2012). "Modification of carrier localization in basal-plane stacking faults: The effect of Si-doping in a-plane GaN." Physica Status Solidi (B) Basic Research vol. 249 (3), 498-502.
    01-01-2012
  • Li C, Wei X, Yan H, Reece MJ and Ye H (2012). "Microwave dielectric properties of CaO-La2O3-Nb2O5-TiO2 ceramics." Journal of Materials Science: Materials in Electronics, 1-8.

    01-01-2012
  • Hu C, Sakka Y, Gao J, Tanaka H and Grasso S (2012). "Microstructure characterization of ZrB 2-SiC composite fabricated by spark plasma sintering with TaSi 2 additive." Journal of The European Ceramic Society vol. 32 (7), 1441-1446.
    01-01-2012
  • Cui B, Zapata-Solvas E, Reece MJ, Wang C-A and Lee WE (2012). "Microstructure and High-temperature Oxidation Behavior of Ti 3AlC 2/W Composites." Journal of The American Ceramic Society
    01-01-2012
  • Chen Q and Pugno NM (2012). "Mechanics of hierarchical 3-D nanofoams." Epl vol. 97 (2)
    01-01-2012
  • Messineo A, Volpe R and Marvuglia A (2012). "Ligno-cellulosic biomass exploitation for power generation: A case study in sicily." Energy vol. 45 (1), 613-625.
    01-01-2012
  • Chen Q and Pugno NM (2012). "In-plane elastic buckling of hierarchical honeycomb materials." European Journal of Mechanics, a/Solids vol. 34, 120-129.
    01-01-2012
  • Noailly J, Ambrosio L, Tanner KE, Planell JA and Lacroix D (2012). "In silico evaluation of a new composite disc substitute with a L3-L5 lumbar spine finite element model." European Spine Journal vol. 21 (SUPPL. 5)
    01-01-2012
  • Grasso S, Yoshida H, Porwal H, Sakka Y and Reece M (2012). "Highly transparent α-alumina obtained by low cost high pressure SPS." Ceramics International
    01-01-2012
  • Kim BN, Hiraga K, Grasso S, Morita K, Yoshida H, Zhang H and Sakka Y (2012). "High-pressure spark plasma sintering of MgO-doped transparent alumina." Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of The Ceramic Society of Japan vol. 120 (1399), 116-118.
    01-01-2012
  • Zhu D, McAleese C, Häberlen M, Kappers MJ, Hylton N, Dawson P, Radtke G, Couillard M, Botton GA, Sahonta SL and Humphreys CJ (2012). "High-efficiency InGaN/GaN quantum well structures on large area silicon substrates." Physica Status Solidi (a) Applications and Materials Science vol. 209 (1), 13-16.
    01-01-2012
  • Vasylkiv O, Borodianska H, Badica P, Grasso S, Sakka Y, Tok A, Su LT, Bosman M and Jan Ma (2012). "High hardness B aC b-(B xO y/BN) composites with 3D mesh-like fine grain-boundary structure by reactive spark plasma sintering." Journal of Nanoscience and Nanotechnology vol. 12 (2), 959-965.
    01-01-2012
  • Bogomol I, Grasso S, Nishimura T, Sakka Y, Loboda P and Vasylkiv O (2012). "Hard polycrystalline eutectic composite prepared by spark plasma sintering." Ceramics International vol. 38 (5), 3947-3953.
    01-01-2012
  • Knoll SM, Zhang S, Joyce TB, Kappers MJ, Humphreys CJ and Moram MA (2012). "Growth, microstructure and morphology of epitaxial ScGaN films." Physica Status Solidi (a) Applications and Materials Science vol. 209 (1), 33-40.
    01-01-2012
  • Badcock TJ, Kappers MJ, Moram MA, Hao R, Dawson P and Humphreys CJ (2012). "Exciton confinement in narrow non-polar InGaN/GaN quantum wells grown on r-plane sapphire." Physica Status Solidi (B) Basic Research vol. 249 (3), 494-497.
    01-01-2012
  • Kong KTS, Mariatti M, Rashid AA and Busfield JJC (2012). "Effect of processing methods and functional groups on the properties of multi-walled carbon nanotube filled poly(dimethyl siloxane) composites." Polymer Bulletin, 1-17.

    01-01-2012
  • Brydone AS, Morrison DSS, Stormonth-Darling J, Meek RDM, Tanner KE and Gadegaard N (2012). "Design and fabrication of a 3D nanopatterned PEEK implant for cortical bone regeneration in a rabbit model." European Cells and Materials vol. 24 (SUPPL. 1)

    01-01-2012
  • Rendtorff NM, Grasso S, Hu C, Suarez G, Aglietti EF and Sakka Y (2012). "Dense zircon (ZrSiO 4) ceramics by high energy ball milling and spark plasma sintering." Ceramics International vol. 38 (3), 1793-1799.
    01-01-2012
  • Boek ES, Hall C and Tardy PMJ (2012). "Deep Bed Filtration Modelling of Formation Damage Due to Particulate Invasion from Drilling Fluids." Transport in Porous Media vol. 91 (2), 479-508.
    01-01-2012
  • Bushby AJ, Mariggi G, Armer HEJ and Collinson LM (2012). "Correlative Light and Volume Electron Microscopy: Using Focused Ion Beam Scanning Electron Microscopy to Image Transient Events in Model Organisms."
    01-01-2012
  • Crumpton-Taylor M, Grandison S, Png KMY, Bushby AJ and Smith AM (2012). "Control of starch granule numbers in Arabidopsis chloroplasts." Plant Physiology vol. 158 (2), 905-916.
    01-01-2012
  • Ambrosio L and Tanner E (2012). "Biomaterials for Spinal Surgery."
    01-01-2012
  • Lee GCB, Su S, Li J, Sugden K, Roohpour N, Yan H and Ye H (2012). "Analysis of femtosecond laser surface patterning on bulk single-crystalline diamond." Journal of Experimental Nanoscience vol. 7 (6), 662-672.
    01-01-2012