Dr Yiwei Sun
BSc, PhD

 

All Publications

Page 276 of 307

2001

  • Structure of a spread film of a polybutadiene-poly(ethylene oxide) linear diblock copolymer at the air-water interface as determined by neutron reflectometry
    Langmuir vol. 17 (1), 131-139.  
    09-01-2001
  • 1-Methylindole-3-carboxaldehyde oxime derivatives
    Acta Crystallogr C vol. 57, 58-61.  
    01-01-2001
  • 980 nm electroluminescence from ytterbium tris(8-hydroxyquinoline)
    Organic Electronics vol. 2, 45-51.  
    01-01-2001
  • A micromechanical. approach to time-dependent failure in off-axis loaded polymer composites
    Compos Part a-Appl S vol. 32 (12), 1697-1711.  
    01-01-2001
  • A new solid acid catalyst: the first phosphonate and phosphonic acid functionalised microporous polysilsesquioxanes
    Chem Commun (01), 67-68.  
    01-01-2001
  • A quarter century of European Biomaterials Conferences
    Tanner KE
    J Mater Sci-Mater M vol. 12 (10-12), 847-848.  
    01-01-2001
  • A rapid classification protocol for the CATH Domain Database to support structural genomics
    Pearl FM, Martin N, Bray JE, Buchan DW, Harrison AP, Lee D, Reeves GA, Shepherd AJ et al.
    Nucleic Acids Research, Oxford University Press (Oup) vol. 29 (1), 223-227.  
    01-01-2001
  • Approximate solution of heat resistance method for solidification in concentric annulus
    WANG HS, Yu BF, Wu YZ
    Journal of Xi'An Jiaotong University vol. 34 (3), 255-260.  
    01-01-2001
  • Approximate solution of two-dimensional solidification in a square cavity
    WANG HS, Yu BF, Wu YZ
    Journal of Xi'An Jiaotong University vol. 34 (5), 485-489.  
    01-01-2001
  • Assessing the homogeneity of the elastic properties and composition of the pig aortic media.
    Stergiopulos N, Vulliémoz S, Rachev A, Meister JJ
    J Vasc Res vol. 38 (3), 237-246.  
    01-01-2001
  • Assessment of mechanical inhomogeneity in the arterial wall by an artery inversion test
    GREENWALD SE, Meister J-J, Pannatier A, Stergiopulos N
    Cardiovascular Engineering vol. 1, 31-36.  
    01-01-2001
  • Basic structure and functional properties of medical biosensors with special regard to biocompatibility
    VADGAMA PM, Farace G
    Biocybernetics and Biomedical Engineering vol. 21 (4), 11-20.  
    01-01-2001
  • Blends of poly(ethylene terephthalate) and epoxy as matrix material for continuous fibre reinforced composites
    Plast Rubber Compos vol. 30 (5), 213-221.  
    01-01-2001
  • Bone formation induced by calcium phosphate ceramics in soft tissue of dogs: a comparative study between porous alpha-TCP and beta-TCP.
    Yuan H, De Bruijn JD, Li Y, Feng J, Yang Z, De Groot K, Zhang X
    J Mater Sci Mater Med vol. 12 (1), 7-13.  
    01-01-2001
  • Boundary element method for the strain-softening response of quasi-brittle materials in compression
    Carpinteri A, Ciola F
    Computers and Structures vol. 79 (4), 389-401.  
    01-01-2001
  • Cabaret finite-difference schemes for the one-dimensional euler equations
    Goloviznin VM, Hynes TP
    Mathematical Modelling and Analysis vol. 6 (2), 210-220.  
    01-01-2001
  • Chemical mapping of indium rich quantum dots in InGaN/GaN quantum wells
    Sharma N, Cho HK, Lee JY, Humphreys CJ
    Mrs Online Proceedings Library, Springer Nature vol. 667 (1) 
    01-01-2001
  • Coarse resolution large-eddy simulation of turbulent channel flows
    Int J Numer Method H vol. 11 (1), 20-35.  
    01-01-2001
  • Compressive deformation and damage of muscle cell subpopulaltions in a model system
    Bader DL, KNIGHT MM, Lee DA, Bouten CV
    Ann. Biomed. Eng. vol. 29 (2), 153-163.  
    01-01-2001
  • Decrease in coronary vascular volume in systole augments cardiac contraction
    Willemsen MJJMF, Duncker DJ, Krams R, Dijkman MA, Lamberts RR, Sipkema P, Westerhof N
    American Journal of Physiology - Heart and Circulatory Physiology vol. 281 (2 50-2) 
    01-01-2001
  • Design of Ferritic Creep-resistant Steels
    Bhadeshia HKDH
    Isij International, Iron and Steel Institute of Japan vol. 41 (6) 
    01-01-2001
  • Design optimization of structural steelwork using a genetic algorithm, FEM and a system of design rules
    Toropov VV, Mahfouz SY
    Engineering Computations Swansea Wales vol. 18 (3-4), 437-459.  
    01-01-2001
  • Direct measurement of mechanical properties of (Pb,La)TiO3 ferroelectric thin films using nanoindentation techniques
    Algueró M, Bushby AJ, Reece MJ
    Journal of Materials Research vol. 16 (4), 993-1002.  
    01-01-2001
  • Direct measurement of mechanical properties of (Pb,La)TiO3 ferroelectric thin films using nanoindentation techniques
    Algueró M, Bushby AJ, Reece MJ
    Journal of Materials Research vol. 16 (4), 993-1002.  
    01-01-2001
  • Direct numerical simulation of transitional noncircular buoyant reactive jets
    Jiang X
    Theoretical and Computational Fluid Dynamics vol. 15 (3), 183-198.  
    01-01-2001
  • Distribution of oxygen partial pressure in dermal papillae of human finger nailfolds
    WANG W, Michel CC, Winlove CP
    Journal of Vascular Research vol. 38 (4), 398-412.  
    01-01-2001
  • Dynamic mechanical characterization of biodegradable composites of hydroxyapatite and polylactides.
    Nazhat SN, Kellomäki M, Törmälä P, Tanner KE, Bonfield W
    J Biomed Mater Res vol. 58 (4), 335-343.  
    01-01-2001
  • Editorial: A QuaterCentury of European Biomaterials Conference
    TANNER KE
    Journal of Materials Science: Matrials in Medicine vol. 12 (10-12), 847-848.  
    01-01-2001
  • Effect of filler type on the mechanical properties of self-reinforced polylactide-calcium phosphate composites
    Bleach NC, Tanner KE, Kellomaki M, Tormala P
    Journal of Materials Science-Materials in Medicine vol. 12 (10-12), 911-915.  
    01-01-2001
  • Effects of environmental conditions on mechanical and physical properties of flax fibers
    Compos Part a-Appl S vol. 32 (8), 1105-1115.  
    01-01-2001
  • Effects of processing routes on structures and dielectric properties of lead iron niobate-lead magnesium niobate binary system
    Yu Y, Feng C, Li C, Yang Y, Yan H
    Japanese Journal of Applied Physics Part 1 Regular Papers and Short Notes and Review Papers vol. 40 (4 A), 2348-2356.  
    01-01-2001
  • Effects of tube diameter and tubeside fin geometry on the heat transfer performance of air-cooled condensers
    WANG HS, Honda H
    Journal of Enhanced Heat Transfer vol. 8 (5), 315-327.  
    01-01-2001
  • Embryonic stem cells: scientific possibilities, ethical considerations, and regulation in the UK
    Lee DA
    Interdiscipl Sci Rev vol. 26 (2), 112-124.  
    01-01-2001
  • exchange mechanism between microvessels and interstitium in the renal medulla
    WANG W
    Recent Advances in Biomechanics, 248-262.  
    01-01-2001
  • Experimental and numerical investigation into fatigue damage mechanisms in multifibre microcomposites
    Plast Rubber Compos vol. 30 (5), 222-232.  
    01-01-2001
  • Extended active-passive decomposition of chaotic systems with application to the modelling and control of synchronous motors
    Vepa R, Isidori A, LamnabhiLagarrigue F, Respondek W
    Nonlinear Control in The Year 2000, Vol 2 vol. 259, 543-554.  
    01-01-2001
  • Fatigue behaviour of mullite studied by the indentation flexure method
    Hvizdoš P, Reece MJ, Torrecillas R
    Journal of The European Ceramic Society vol. 21 (1), 53-61.  
    01-01-2001
  • Fatigue damage mechanisms in carbon-epoxy multi-fibre model composites
    Adv Compos Lett vol. 10 (1), 21-32.  
    01-01-2001
  • First International Conference on Eco-Composites (ECOCOMP)
    Materials Technology vol. 16 (4), 253-255.  
    01-01-2001
  • Fourier-BEM: Or what to do if no fundamental solution is available ?
    Duddeck FME
    Meccanica vol. 36 (4), 437-448.  
    01-01-2001
  • From polymeric films to nanocapsules
    Möhwald H, Lichtenfeld H, Moya S, Voigt A, Sukhorukov G, Leporatti S, Dähne L, Antipov A et al.
    Studies in Surface Science and Catalysis vol. 132, 485-490.  
    01-01-2001
  • Growth of needle and plate shaped particles: Theory for small supersaturations, maximum velocity hypothesis
    Rivera­Díaz­del­Castillo PEJ
    Materials Science and Technology, Sage Publications vol. 17 (1), 25-29.  
    01-01-2001
  • Heat transfer performance of air-cooled condensers: effects of tube diameter and tubeside fin geometry
    WANG HS, Honda H
    Transactions of The Jsrae vol. 18 (2), 153-161.  
    01-01-2001
  • High temperature creep/fatigue of single or multiphase ceramics with an additional glass/liquid phase
    Davies CKL, Oddy D, Reece MJ, Stevens RN, Williams K, Fantozzi G, Olagnon C, Torrecillas R
    International Journal of Materials and Product Technology (SPEC ISS. VOL.2), 530-537.  
    01-01-2001
  • High-pressure high-temperature studies of structural ordering in GaSb
    Phys Status Solidi B vol. 223 (2), 405-409.  
    01-01-2001
  • Hydroxyapatite/polypropylene composite: A novel bone substitute material
    Bonner M, Ward IM, McGregor W, Tanner KE, Bonfield W
    J Mater Sci Lett vol. 20 (22), 2049-2051.  
    01-01-2001
  • Improved accuracy and reliability of sweepback angle, pitch angle and hand velocity calculations in swimming.
    J Biomech vol. 34 (1), 31-39.  
    01-01-2001
  • Improving the efficiency of the numerical modelling of built environment earth-contact heat transfers
    Davies M, Zoras S, Adjali MH
    Applied Energy, Elsevier vol. 68 (1), 31-42.  
    01-01-2001
  • Influence of boundary-layer thickness on base pressure and vortex shedding frequency
    Rowe A, Fry ALA
    Aiaa Journal, American Institute of Aeronautics and Astronautics (Aiaa) vol. 39, 754-756.  
    01-01-2001
  • Mathematical modeling of membrane-attached biofilms
    Nicolella C, Livingston AG
    Chemical Engineering & Technology vol. 24 (7), 43-46.  
    01-01-2001

« Previous 50  Next 50 »