Dr Pihua Wen
BA MSc(CSU, Hunan) PhD(WIT)

All Publications

2021

• Jiang F, Yu M, Peng X and Wen PH (2021). "Effect of nanoscale amorphization on dislocation emission from a semi-elliptical surface crack tip in nanocrystalline materials." Mathematics and Mechanics of Solids 
  DOI

  10.1177/10812865211045108

  Abstract
  
  09-10-2021
• Yang JJ, Liu JZ, Sladek J, Sladek V and Wen PH (2021). "Stress intensity factors and T-stresses by boundary integral equations: 3D statics." Elsevier  Engineering Fracture Mechanics  vol. 256,
  DOI

  10.1016/j.engfracmech.2021.107917
  
  31-07-2021
• Jiang P, Zheng H, Xiong J and Wen P (2021). "Nonlinear elastic-plastic analysis of reinforced concrete column-steel beam connection by RBF-FD method." Engineering Analysis With Boundary Elements  vol. 128, 188-194.
  DOI

  10.1016/j.enganabound.2021.04.003

  Abstract
  
  01-07-2021
• Huang W, Tang YD, Sladek J, Sladek V and Wen PH (2021). "Meshless analysis for cracked shallow shell." Elsevier  Engineering Analysis With Boundary Elements  vol. 130, 145-160.
  DOI

  10.1016/j.enganabound.2021.05.005
  
  06-06-2021
• Wen PH, Tang YD, Sladek J and Sladek V (2021). "BEM analysis for curved cracks." Engineering Analysis With Boundary Elements  vol. 127, 91-101.
  DOI

  10.1016/j.enganabound.2021.03.014
  
  01-06-2021
• Zheng H, Sladek J, Sladek V, Wang SK and Wen PH (2021). "Fracture analysis of functionally graded material by hybrid meshless displacement discontinuity method." Elsevier  Engineering Fracture Mechanics  vol. 247, 107591-107591.
  DOI

  10.1016/j.engfracmech.2021.107591

  Abstract
  
  25-02-2021
• Pan QX, Zheng CC, Lü ST, Qian GP, Zhang JH, Wen PH, Milkos BC and Zhou HD (2021). "Field measurement of strain response for typical asphalt pavement." Springer Verlag  Journal of Central South University  vol. 28, (2) 618-632.
  DOI

  10.1007/s11771-021-4626-9

  Abstract
  
  18-02-2021

2020

• Zheng H, Sladek J, Sladek V, Wang SK and Wen PH (2020). "Hybrid meshless/displacement discontinuity method for FGM Reissner's plate with cracks." Elsevier  Applied Mathematical Modelling: Simulation and Computation For Engineering and Environmental Systems 
  DOI

  10.1016/j.apm.2020.10.023
  
  28-10-2020
• Zhang J, Ju C, Wen P, Shu X, Lin W and Chi B (2020). "A dual interpolation boundary face method for 3D elasticity." Elsevier  Engineering Analysis With Boundary Elements  vol. 122, 102-116.
  DOI

  10.1016/j.enganabound.2020.10.015
  
  24-10-2020
• Feng H, Pang J, Fang Q, Chen C and Wen P (2020). "Enhanced ductility of nanomaterials through cooperative dislocation emission from cracks and grain boundaries." International Journal of Mechanical Sciences  vol. 179,
  DOI

  10.1016/j.ijmecsci.2020.105652

  Abstract
  
  10-08-2020
• Yu M, Jiang F, Peng X and Wen PH (2020). "A theoretical analysis of dislocation emission from an elliptical blunt crack tip in nanocrystalline solid." Elsevier  Engineering Fracture Mechanics  vol. 236,
  DOI

  10.1016/j.engfracmech.2020.107216
  
  20-07-2020
• Wen P and Aliabadi F (2020). "Special issue on: Computational methods in fracture mechanics." Engineering Analysis With Boundary Elements  vol. 118, 156-156.
  DOI

  10.1016/j.enganabound.2020.05.014
  
  17-06-2020
• Sladek J, Sladek V and Wen PH (2020). "The meshless analysis of scale-dependent problems for coupled fields." Materials  vol. 13, (11)
  DOI

  10.3390/ma13112527
  
  01-06-2020
• Li J, Sladek J, Sladek V and Wen PH (2020). "Hybrid meshless displacement discontinuity method (MDDM) in fracture mechanics: Static and dynamic." Elsevier  European Journal of Mechanics a: Solids  vol. 83,
  DOI

  10.1016/j.euromechsol.2020.104023

  Abstract
  
  01-05-2020
• Aliabad FMH and Wen P (2020). "Editorial – Numerical fracture." Theoretical and Applied Fracture Mechanics  vol. 108,
  DOI

  10.1016/j.tafmec.2020.102655

  Abstract
  
  24-04-2020
• Wei H, Pan QX, Adetoro OB, Avital E, Yuan Y and Wen PH (2020). "Dynamic large deformation analysis of a cantilever beam." Elsevier  Mathematics and Computers in Simulation  vol. 174, 183-204.
  DOI

  10.1016/j.matcom.2020.02.022

  Abstract
  
  02-03-2020
• Zhou J, Wen P and Wang S (2020). "Numerical investigation on the repeated low-velocity impact behavior of composite laminates." Elsevier  Composites Part B: Engineering  vol. 185,
  DOI

  10.1016/j.compositesb.2020.107771

  Abstract
  
  22-01-2020

2019

• Pan QX, Zheng JL and Wen PH (2019). "Bi-modular material fracture analysis by finite element method." Elsevier  Theoretical and Applied Fracture Mechanics  vol. 105,
  DOI

  10.1016/j.tafmec.2019.102424
  
  02-12-2019
• Pan Q, Zheng J and Wen P (2019). "Efficient algorithm for 3D bimodulus structures." Springer (Part of Springer Nature)  Acta Mechanica Sinica 
  DOI

  10.1007/s10409-019-00909-3
  
  27-11-2019
• Pan QX, Zheng JL, Li Q and Wen PH (2019). "Fracture analysis for bi-modular materials." Elsevier  European Journal of Mechanics a: Solids 
  DOI

  10.1016/j.euromechsol.2019.103904

  Abstract
  
  16-11-2019
• Huang T, Yuan Y, Zheng JL, Avital E and Wen PH (2019). "Large deformations of tapered beam with finite integration method." Engineering Analysis With Boundary Elements  vol. 107, 115-123.
  DOI

  10.1016/j.enganabound.2019.06.017

  Abstract
  
  16-07-2019
• Zeng X, Li J, Liu F and Wen P (2019). "Generalized screw dislocations interacting with interfacial secondary crack in magneto-electro-elastic solid." Wiley  Zamm Zeitschrift Fur Angewandte Mathematik Und Mechanik  vol. 99, (8)
  DOI

  10.1002/zamm.201800245

  Abstract
  
  17-06-2019
• Zhou J, Wen P and Wang S (2019). "Finite element analysis of a modified progressive damage model for composite laminates under low-velocity impact." Composite Structures  vol. 225,
  DOI

  10.1016/j.compstruct.2019.111113

  Abstract
  
  10-06-2019
• Zheng H, Xiong JG, Yuan Y and Wen PH (2019). "Mixed-mode dynamic stress intensity factors by variation technique with finite block method." Engineering Analysis With Boundary Elements  vol. 106, 27-33.
  DOI

  10.1016/j.enganabound.2019.04.025

  Abstract
  
  13-05-2019
• Wang Z, Yu T, Wang X, Zhang T, Zhao J and Wen PH (2019). "Grinding temperature field prediction by meshless finite block method with double infinite element." International Journal of Mechanical Sciences  vol. 153-154, 131-142.
  DOI

  10.1016/j.ijmecsci.2019.01.037
  
  29-01-2019
• Pan Q, Zheng J and Wen P (2019). "Theoretical Study on Generalized Elastic Laws of Elastic Theory with Different Modulus." Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences  vol. 46, (1) 93-100.
  DOI

  10.16339/j.cnki.hdxbzkb.2019.01.010

  Abstract
  
  25-01-2019
• Tian Z, Liu X, Wang Y and Wen PH (2019). "The modified matrix splitting iteration method for computing pagerank problem." University of Nis  Filomat  vol. 33, (3) 725-740.
  DOI

  10.2298/FIL1903725T

  Abstract
  
  01-01-2019

2018

• WEN P, Jin J, Huang T and Zheng JL (2018). "Dimension reduction analysis with mapping and direct integration algorithm." Elsevier  Engineering Analysis With Boundary Elements 
  DOI

  10.1016/j.enganabound.2018.09.019
  
  03-12-2018
• WEN P, Li Y and Li J (2018). "Finite and infinite block Petrov-Galerkin method for cracks in functionally graded materials." Elsevier  Applied Mathematical Modelling 
  DOI

  10.1016/j.apm.2018.11.036
  
  26-11-2018
• Tian Z, Fan CM, Deng Y and Wen PH (2018). "New explicit iteration algorithms for solving coupled continuous Markovian jump Lyapunov matrix equations." Journal of The Franklin Institute  vol. 355, (17) 8346-8372.
  DOI

  10.1016/j.jfranklin.2018.09.027

  Abstract
  
  01-11-2018
• Wang Z, Li Y, Yu T, Zhao J and Wen PH (2018). "Prediction of 3D grinding temperature field based on meshless method considering infinite element." International Journal of Advanced Manufacturing Technology 
  DOI

  10.1007/s00170-018-2801-4
  
  24-10-2018
• Yu M, Yang Y, Peng X and Wen PH (2018). "Effect of nanotwin and dislocation pileup at twin boundary on dislocation emission from a semi-elliptical blunt crack tip in nanocrystalline materials." Engineering Fracture Mechanics  vol. 202, 288-296.
  DOI

  10.1016/j.engfracmech.2018.09.025

  Abstract
  
  19-09-2018
• Huang T, Pan QX, Jin J, Zheng JL and Wen PH (2018). "Continuous constitutive model for bimodulus materials with meshless approach." Applied Mathematical Modelling  vol. 66, 41-58.
  DOI

  10.1016/j.apm.2018.09.004

  Abstract
  
  12-09-2018
• Yu M, Peng XH and Wen PH (2018). "Effect of cooperative grain boundary sliding and migration on dislocation emission from interface collinear crack tip in nanocrystalline bi-materials." Acta Mechanica  vol. 229, (9) 3901-3913.
  DOI

  10.1007/s00707-018-2196-1

  Abstract
  
  01-09-2018
• Yang JJ, Zheng JL and Wen PH (2018). "Generalized method of fundamental solutions (GMFS) for boundary value problems." Engineering Analysis With Boundary Elements  vol. 94, 25-33.
  DOI

  10.1016/j.enganabound.2018.05.014

  Abstract
  
  14-06-2018
• WEN P, Yang JJ, Huang T, Zheng JL and Deng YJ (2018). "Infinite element in meshless approaches." European Journal of Mechanics / a Solids 
  DOI

  10.1016/j.euromechsol.2018.05.010

  Abstract
  
  12-05-2018
• Huang T, Zheng JL, Lv ST, Zhang JH, Wen PH and Bailey CG (2018). "Failure criterion of an asphalt mixture under three-dimensional stress state." Construction and Building Materials  vol. 170, 708-715.
  DOI

  10.1016/j.conbuildmat.2018.03.081

  Abstract
  
  10-05-2018
• Yang JJ, Wang ZX, Adetoro OB, Wen PH and Bailey CG (2018). "The thermal analysis of cutting/grinding processes by meshless finite block method." Engineering Analysis With Boundary Elements 
  DOI

  10.1016/j.enganabound.2018.03.003

  Abstract
  
  01-05-2018
• Fu Z, Chen W, Wen P and Zhang C (2018). "Singular boundary method for wave propagation analysis in periodic structures." Journal of Sound and Vibration  vol. 425, 170-188.
  DOI

  10.1016/j.jsv.2018.04.005
  
  11-04-2018
• WEN P, BAILEY CG, Lei M and Li M (2018). "Moving boundary analysis in heat conduction with multilayer composites by finite block method." Elsevier  Engineering Analysis With Boundary Elements 
  DOI

  10.1016/j.enganabound.2018.01.009

  Abstract
  
  24-03-2018
• Fang Q, Wang Q, Li J, Chen E, Liu B and Wen P (2018). "A systematic investigation of cycle number, temperature and electric field strength effects on Si anode." Materials and Design  vol. 144, 1-13.
  DOI

  10.1016/j.matdes.2018.02.019
  
  07-02-2018
• Tian Z, Tian M, Zhang Y and Wen P (2018). "An iteration method for solving the linear system Ax=b." Computers and Mathematics With Applications 
  DOI

  10.1016/j.camwa.2018.01.003

  Abstract
  
  02-02-2018
• WEN P and Korakianitis T (2018). "Medical Applications for 3D Printing: Recent Developments." Missouri Medicine  vol. 115, (1) 83-89.
  
  01-02-2018
• Jin J, Zheng JL, Huang T, Yang JJ, Wang HS, Wen PH and Li JM (2018). "Inverse heat conduction in anisotropic and functionally graded media by finite integration method." International Journal of Computational Methods and Experimental Measurements  vol. 6, (6) 1149-1160.
  DOI

  10.2495/CMEM-V6-N6-1149-1160
  
  01-01-2018
• Paul GM, Rezaienia A, Wen P, Condoor S, Parkar N, King W and Korakianitis T (2018). "Medical Applications for 3D Printing: Recent Developments." Mo Med  vol. 115, (1) 75-81.
  
  01-01-2018

2017

• Fan J, Li J, Huang Z, Wen PH and Bailey CG (2017). "Grain size effects on indentation-induced plastic deformation and amorphization process of polycrystalline silicon." Computational Materials Science  vol. 144, 113-119.
  DOI

  10.1016/j.commatsci.2017.12.017

  Abstract
  
  20-12-2017
• Jin J, Lin F, Liu R, Xiao T, Zheng J, Qian G, Liu H and Wen P (2017). "Preparation and thermal properties of mineral-supported polyethylene glycol as form-stable composite phase change materials (CPCMs) used in asphalt pavements." Macmillan Publishers Limited, Part of Springer Nature.  Sci Rep  vol. 7, (1) 16998-16998.
  DOI

  10.1038/s41598-017-17224-1

  Abstract
  
  05-12-2017
• Huang T, Yang JJ, Jin J, Wen PH and Aliabadi MH (2017). "Evaluation of stress intensity factors and T-stress by finite block method: Static and dynamic." Theoretical and Applied Fracture Mechanics 
  DOI

  10.1016/j.tafmec.2017.08.009

  Abstract
  
  08-09-2017
• Li J, Huang T, Yue JH, Shi C and Wen PH (2017). "Anti-plane fundamental solutions of functionally graded materials and applications to fracture mechanics." Journal of Strain Analysis For Engineering Design  vol. 52, (7) 422-433.
  DOI

  10.1177/0309324717724010

  Abstract
  
  03-08-2017
• Yue JH, Huang T, Jin J, Yang JJ, Korakianitis T and Wen PH (2017). "Integral equation analysis for cracked strip of orthotropic functionally graded material." Engineering Fracture Mechanics  vol. 182, 114-126.
  DOI

  10.1016/j.engfracmech.2017.07.016

  Abstract
  
  17-07-2017
• Zhao HB, Feng H, Liu F, Liu YW and Wen PH (2017). "Effect of nanoscale twin and dislocation pileup at twin boundary on crack blunting in nanocrystalline materials." Acta Mechanica  1-13.
  DOI

  10.1007/s00707-017-1874-8

  Abstract
  
  17-06-2017
• Li J, Liu JZ, Korakianitis T and Wen PH (2017). "Finite block method in fracture analysis with functionally graded materials." Engineering Analysis With Boundary Elements  vol. 82, 1339-1351.
  DOI

  10.1016/j.enganabound.2017.05.012

  Abstract
  
  09-06-2017
• Feng H, Fang QH, Liu B, Liu Y, Liu YW and Wen PH (2017). "Nucleation and growth mechanisms of nanoscale deformation twins in hexagonal-close-packed metal magnesium." Mechanics of Materials  vol. 109, 26-33.
  DOI

  10.1016/j.mechmat.2017.03.015

  Abstract
  
  01-06-2017
• Pi ZP, Fang QH, Jiang C, Liu B, Liu Y, Wen PH and Liu YW (2017). "Stress dependence of the dislocation core structure and loop nucleation for face-centered-cubic metals." Acta Materialia  vol. 131, 380-390.
  DOI

  10.1016/j.actamat.2017.04.019

  Abstract
  
  12-04-2017
• Pi ZP, Fang QH, Liu B, Liu Y and Wen PH (2017). "Effect of a generalized shape Peierls potential and an external stress field on kink mechanism in a continuum model." International Journal of Plasticity  vol. 90, 267-285.
  DOI

  10.1016/j.ijplas.2017.01.008

  Abstract
  
  02-02-2017

2016

• WEN P, Li M, Meng L and Shi C (2016). "Post buckling analysis for composite plate by finite block Petrov-Galerkin method." European Journal of Mechanics - a/Solids  vol. 61, 443-455.
  DOI

  10.1016/j.euromechsol.2016.10.005

  Abstract
  
  18-10-2016
• Quan J, Fang Q, Chen J, Xie C, Liu Y and Wen P (2016). "Investigation of subsurface damage considering the abrasive particle rotation in brittle material grinding." International Journal of Advanced Manufacturing Technology  vol. 90, (9-12) 2461-2476.
  DOI

  10.1007/s00170-016-9567-3

  Abstract
  
  17-10-2016
• Shen X, AVITAL E, Paul G, Rezaienia MA, Wen P and Alexander T (2016). "Experimental Study of Surface Curvature Effects on Aerodynamic Performance of a Low Reynolds Number Airfoil for Use in Small Wind Turbines." Aip Publishing  Journal of Renewable and Sustainable Energy  vol. 8, (5) 053303-053303.
  DOI

  10.1063/1.4963236

  Abstract
  
  29-09-2016
• Li X, Fang Q, Wu H, Li J, Liu Y and Wen P (2016). "Misfit dislocations induced by lithium-ion diffusion in a thin film anode." Journal of Solid State Electrochemistry  vol. 21, (2) 419-427.
  DOI

  10.1007/s10008-016-3377-2

  Abstract
  
  05-09-2016
• Peng J, Fang QH, Liu YW, Liu B and Wen PH (2016). "Influence of nanoscale amorphization on emission of dislocations from a finite length crack tip in nanocrystalline materials." Engineering Fracture Mechanics  vol. 163, 487-498.
  DOI

  10.1016/j.engfracmech.2016.03.032
  
  01-09-2016
• Li M, Tian YL, Wen PH and Aliabadi MH (2016). "Anti-plane interfacial crack with functionally graded coating: static and dynamic." Theoretical and Applied Fracture Mechanics  vol. 86, 250-259.
  DOI

  10.1016/j.tafmec.2016.07.010

  Abstract
  
  17-08-2016
• Li M, Dou FF, Korakianitis T, Shi C and Wen PH (2016). "Boundary node Petrov–Galerkin method in solid structures." Computational and Applied Mathematics  vol. 37, (1) 135-159.
  DOI

  10.1007/s40314-016-0335-7

  Abstract
  
  12-04-2016
• Li M, Meng LX, Hinneh P and Wen PH (2016). "Finite block method for interface cracks." Engineering Fracture Mechanics  vol. 156, 25-40.
  DOI

  10.1016/j.engfracmech.2016.02.015

  Abstract
  
  08-02-2016
• Wang ZP, Feng H, Liu F, Fang QH, Liu YW and Wen PH (2016). "Effect of wedge disclination dipole on dislocation emission from a surface crack tip in nanocrystalline materials." Theoretical and Applied Fracture Mechanics  vol. 81, 25-31.
  DOI

  10.1016/j.tafmec.2015.11.005
  
  01-02-2016
• Li M, Tian ZL, Hon YC, Chen CS and Wen PH (2016). "Improved finite integration method for partial differential equations." Engineering Analysis With Boundary Elements  vol. 64, 230-236.
  DOI

  10.1016/j.enganabound.2015.12.012
  
  09-01-2016
• Li X, Fang Q, Li J, Wu H, Liu Y and Wen P (2016). "Analytical model for sandwich-lithiation in hollow amorphous silicon nano-anodes coated on carbon nanofibers." Journal of The Electrochemical Society  vol. 163, (2) A163-A170.
  DOI

  10.1149/2.0361602jes
  
  01-01-2016

2015

• Li X, Fang Q, Li J, Wu H, Liu Y and Wen P (2015). "Diffusion-induced stress and strain energy affected by dislocation mechanisms in a cylindrical nanoanode." Solid State Ionics  vol. 281, 21-28.
  DOI

  10.1016/j.ssi.2015.08.016
  
  15-11-2015
• Li M, Monjiza A, Xu YG and Wen PH (2015). "Finite block Petrov-Galerkin method in transient heat conduction." Engineering Analysis With Boundary Elements  vol. 60, 106-114.
  DOI

  10.1016/j.enganabound.2015.01.011
  
  01-11-2015
• Li M, Lei M and Wen PH (2015). "Non-linear analysis of FGM composites by finite block method in cylindrical coordinates." Engineering Structures  vol. 101, 150-162.
  DOI

  10.1016/j.engstruct.2015.07.015
  
  05-10-2015
• Li J, Fang Q, Wu H, Liu Y and Wen P (2015). "Investigation into diffusion induced plastic deformation behavior in hollow lithium ion battery electrode revealed by analytical model and atomistic simulation." Electrochimica Acta  vol. 178, 597-607.
  DOI

  10.1016/j.electacta.2015.08.038
  
  01-10-2015
• Yang J, Liu X and Wen PH (2015). "The local Kansa's method for solving Berger equation." Engineering Analysis With Boundary Elements  vol. 57, 16-22.
  DOI

  10.1016/j.enganabound.2015.03.005
  
  03-09-2015
• Li M, Chen CS, Hon YC and Wen PH (2015). "Finite integration method for solving multi-dimensional partial differential equations." Applied Mathematical Modelling  vol. 39, (17) 4979-4994.
  DOI

  10.1016/j.apm.2015.03.049
  
  01-09-2015
• Li L, Aliabadi F and Wen PH (2015). "Micromechanical Continuum Damage Analysis of Plain Woven Composites." Journal of Multiscale Modelling  vol. 06, (03)
  DOI

  10.1142/s1756973715500092
  
  01-09-2015
• Pi ZP, Fang QH, Liu B, Feng H, Liu Y, Liu YW and Wen PH (2015). "A phase field study focuses on the transverse propagation of deformation twinning for hexagonal-closed packed crystals." International Journal of Plasticity  vol. 76, 130-146.
  DOI

  10.1016/j.ijplas.2015.08.002
  
  15-08-2015
• Li J, Fang QH, Liu B, Liu Y, Liu YW and Wen PH (2015). "Mechanism of crack healing at room temperature revealed by atomistic simulations." Acta Materialia  vol. 95, 291-301.
  DOI

  10.1016/j.actamat.2015.06.006
  
  16-06-2015
• Ming L, Korakianitis T and Wen PH (2015). "Discussions to the paper closed form solution for a nonlocal elastic bar in tension by A.A. Pisano and P. Fuschi [Int. J. Solids Struct. 40 (2003) 13-23]." International Journal of Solids and Structures  vol. 62,
  DOI

  10.1016/j.ijsolstr.2015.02.013
  
  01-06-2015
• Tao Y, Fang Q, Liu Y, Liu F and Wen P (2015). "Stress intensity factor of a mode I crack inside a nanoscale cylindrical inhomogeneity." Engineering Fracture Mechanics  vol. 141, 44-56.
  DOI

  10.1016/j.engfracmech.2015.04.023
  
  01-06-2015
• Korakianitis T, Rezaienia MA, AVITAL E, Shen X, Munjiza A, Wen P and Williams JJR (2015). "Aerodynamics of Wind Turbine Technology." Handbook of Clean Energy Systems  Wiley-Blackwel 
  DOI

  10.1002/9781118991978.hces046
  
  22-05-2015
• Zhao Y, Fang Q, Liu Y and Wen P (2015). "Creep behavior as dislocation climb over NiAl nanoprecipitates in ferritic alloy: The effects of interface stresses and temperature." International Journal of Plasticity  vol. 69, 89-101.
  DOI

  10.1016/j.ijplas.2015.02.006
  
  24-02-2015
• Ming L, Korakianitis T and Wen PH (2015). "Discussions to the paper Closed form solution for a nonlocal elastic bar in tension by A.A. Pisano and P. Fuschi [Int. J. Solids Struct. 40 (2003) 13-23]." Elsevier Ltd  International Journal of Solids and Structures 
  DOI

  10.1016/j.ijsolstr.2015.02.013
  
  01-01-2015
• Li J, Lu D, Fang Q, Liu Y and Wen P (2015). "Cooperative surface effect and dislocation effect in lithium ion battery electrode." Solid State Ionics  vol. 274, 46-54.
  DOI

  10.1016/j.ssi.2015.03.004
  
  01-01-2015
• Li M, Lei M, Munjiza A and Wen PH (2015). "Frictional contact analysis of functionally graded materials with Lagrange finite block method." International Journal For Numerical Methods in Engineering  vol. 103, (6) 391-412.
  DOI

  10.1002/nme.4894
  
  01-01-2015
• Bacarreza O, Wen P and Aliabadi MH (2015). "Micromechanical modelling of textile composites." Computational and Experimental Methods in Structures  vol. 6, 1-74.
  DOI

  10.1142/9781783266180_0001
  
  01-01-2015

2014

• Cao RH, Cao P, Wen PH and Chen RW (2014). "Failure Characteristics of Rock-Like Material with Multi-Fissures under Uniaxial Compression." Applied Mechanics and Materials  vol. 711, 129-132.
  DOI

  10.4028/www.scientific.net/amm.711.129
  
  01-12-2014
• Yang J, Liu X and Wen PH (2014). "The local Kansa's method for solving Berger equation." Elsevier Ltd  Engineering Analysis With Boundary Elements 
  DOI

  10.1016/j.enganabound.2015.03.005
  
  03-09-2014
• Li M, Monjiza A, Xu YG and Wen PH (2014). "Finite block Petrov-Galerkin method in transient heat conduction." Engineering Analysis With Boundary Elements 
  DOI

  10.1016/j.enganabound.2015.01.011
  
  04-08-2014
• Li M and Wen PH (2014). "Finite block method for transient heat conduction analysis in functionally graded media." International Journal For Numerical Methods in Engineering  vol. 99, (5) 372-390.
  DOI

  10.1002/nme.4693
  
  03-08-2014
• Yu GX, Sun J, Wang HS, Wen PH and Rose JW (2014). "Meshless inverse method to determine temperature and heat flux at boundaries for 2D steady-state heat conduction problems." Elsevier/Scince Direct  Experimental Thermal and Fluid Science  vol. 52, 156-163.
  DOI

  10.1016/j.expthermflusci.2013.09.006

  Abstract
  
  01-01-2014
• Wen PH, Huang XJ and Aliabadi F (2014). "High accurate solutions of nonlocal elasticity for sphere." Key Engineering Materials  vol. 577-578, 509-512.
  DOI

  10.4028/www.scientific.net/KEM.577-578.509
  
  01-01-2014
• Zhang CY, Cao P, Pu CZ, Liu J and Wen PH (2014). "Integrated identification method of rheological model of sandstone in Sanmenxia bauxite." Transactions of Nonferrous Metals Society of China (English Edition)  vol. 24, (6) 1859-1865.
  DOI

  10.1016/S1003-6326(14)63264-7
  
  01-01-2014
• Li J, Liu Y and Wen P (2014). "An edge dislocation interacting with an elastic thin-layered semi-infinite matrix." Mathematics and Mechanics of Solids  vol. 19, (6) 626-639.
  DOI

  10.1177/1081286513481008
  
  01-01-2014
• Wen PH, Cao P and Korakianitis T (2014). "Finite Block Method in elasticity." Engineering Analysis With Boundary Elements  vol. 46, 116-125.
  DOI

  10.1016/j.enganabound.2014.05.006
  
  01-01-2014

2013

• Wen PH, Hon YC, Li M and Korakianitis T (2013). "Finite integration method for partial differential equations." Applied Mathematical Modelling  vol. 37, (24) 10092-10106.
  DOI

  10.1016/j.apm.2013.05.054
  
  15-12-2013
• Li M, Chen CS, Hon YC and Wen PH (2013). "Finite integration method for solving multi-dimensional partial differential equations." Elsevier Inc.  Applied Mathematical Modelling 
  DOI

  10.1016/j.apm.2015.03.049
  
  16-11-2013
• Wen PH, Huang XJ and Aliabadi MH (2013). "Two Dimensional Nonlocal Elasticity Analysis by Local Integral Equation Method." Cmes-Computer Modeling in Engineering & Sciences  vol. 96, (3) 199-225.
  
  01-11-2013
• Li M, Hon YC, Korakianitis T and Wen PH (2013). "Finite integration method for nonlocal elastic bar under static and dynamic loads." Engineering Analysis With Boundary Elements  vol. 37, (5) 842-849.
  DOI

  10.1016/j.enganabound.2013.01.018
  
  10-04-2013
• Wen PH and Aliabadi MH (2013). "Elastodynamic problems by meshless local integral method: Analytical formulation." Engineering Analysis With Boundary Elements  vol. 37, (5) 805-811.
  DOI

  10.1016/j.enganabound.2013.01.019
  
  08-04-2013
• Wen PH and Aliabadi MH (2013). "Analytical formulation of meshless local integral equation method." Applied Mathematical Modelling  vol. 37, (4) 2115-2126.
  DOI

  10.1016/j.apm.2012.05.006
  
  15-02-2013
• Zeng X, Fang QH, Liu YW and Wen PH (2013). "Screw dislocations interacting with two asymmetrical interfacial cracks emanating from an elliptical hole." Chinese Physics B  vol. 22, (1)
  DOI

  10.1088/1674-1056/22/1/014601
  
  01-01-2013
• Wen PH, Hon YC, Li M and Korakianitis T (2013). "Finite integration method for partial differential equations." Applied Mathematical Modelling 
  DOI

  10.1016/j.apm.2013.05.054
  
  01-01-2013
• Aliabadi F and Wen P (2013). "Foreword: Advances in crack growth modelling." Key Engineering Materials  vol. 560,
  
  01-01-2013

2012

• Wen PH and Aliabadi MH (2012). "Crack growth modelling in functionally graded materials by mesh-free method." Sdhm Structural Durability and Health Monitoring  vol. 8, (3) 223-247.
  
  01-12-2012
• Sladek J, Sladek V, Stanak P, Wen PH and Atluri SN (2012). "Laminated elastic plates with piezoelectric sensors and actuators." Cmes - Computer Modeling in Engineering and Sciences  vol. 85, (6) 543-572.
  
  26-10-2012
• Liu YW, Zhao YX, Wen PH and Lin S (2012). "Elastic behavior of an edge dislocation inside the nanoscale coating layer." Acta Mechanica  vol. 223, (9) 1917-1935.
  DOI

  10.1007/s00707-012-0689-x
  
  01-09-2012
• Sladek J, Sladek V, Wen PH and Hon B (2012). "Inverse heat conduction problems in three-dimensional anisotropic functionally graded solids." Journal of Engineering Mathematics  vol. 75, (1) 157-171.
  DOI

  10.1007/s10665-011-9517-x
  
  01-08-2012
• Wen PH and Aliabadi MH (2012). "Damage mechanics analysis of plain woven fabric composite micromechanical model for mesh-free simulations." Journal of Composite Materials  vol. 46, (18) 2239-2253.
  DOI

  10.1177/0021998311430868
  
  01-08-2012
• Zeng X, Liu YW and Wen PH (2012). "Dislocation emission from nanovoid with surface effects." International Journal of Mechanical Sciences  vol. 61, (1) 65-70.
  DOI

  10.1016/j.ijmecsci.2012.05.003
  
  01-08-2012
• Wen PH (2012). "The analytical solutions of incompressible saturated poroelastic circular Mindlin's plate." Journal of Applied Mechanics, Transactions Asme  vol. 79, (5)
  DOI

  10.1115/1.4006254
  
  09-07-2012
• Wen PH and Aliabadi MH (2012). "Dual Boundary Element Method for Modelling Curved Crack Paths." International Journal of Fracture  vol. 176, (1) 127-133.
  DOI

  10.1007/s10704-012-9719-x
  
  01-07-2012
• Tu W, Gu YT and Wen PH (2012). "Effective shear modulus approach for two dimensional solids and plate bending problems by meshless point collocation method." Engineering Analysis With Boundary Elements  vol. 36, (5) 675-684.
  DOI

  10.1016/j.enganabound.2011.11.016
  
  01-05-2012
• Wen PH and Aliabadi MH (2012). "Analysis of functionally graded plates by meshless method: A purely analytical formulation." Engineering Analysis With Boundary Elements  vol. 36, (5) 639-650.
  DOI

  10.1016/j.enganabound.2011.11.017
  
  01-05-2012
• Wen PH and Aliabadi MH (2012). "A hybrid finite difference and moving least square method for elasticity problems." Engineering Analysis With Boundary Elements  vol. 36, (4) 600-605.
  DOI

  10.1016/j.enganabound.2011.10.002
  
  01-04-2012
• Chen CS, Fan CM and Wen PH (2012). "The method of approximate particular solutions for solving certain partial differential equations." Numerical Methods For Partial Differential Equations  vol. 28, (2) 506-522.
  DOI

  10.1002/num.20631
  
  01-01-2012
• Wen PH and Aliabadi MH (2012). "Analytical formulation of meshless local integral equation method." Applied Mathematical Modelling 
  DOI

  10.1016/j.apm.2012.05.006
  
  01-01-2012
• Li LY, Aliabadi MH and Wen PH (2012). "Meshfree continuum damage mechanics modelling for 3D orthogonal woven composites." Key Engineering Materials  vol. 488-489, 759-762.
  DOI

  10.4028/www.scientific.net/KEM.488-489.759
  
  01-01-2012
• Wen PH and Aliabadi MH (2012). "Crack growth by dimensional reduction methods." Key Engineering Materials  vol. 525-526, 17-20.
  DOI

  10.4028/www.scientific.net/KEM.525-526.17
  
  01-01-2012
• Wen PH and Aliabadi MH (2012). "Dynamic crack problems using meshless method." Key Engineering Materials  vol. 525-526, 601-604.
  DOI

  10.4028/www.scientific.net/KEM.525-526.601
  
  01-01-2012

2011

• Li LY, Wen PH and Aliabadi MH (2011). "Meshfree modeling and homogenization of 3D orthogonal woven composites." Composites Science and Technology  vol. 71, (15) 1777-1788.
  DOI

  10.1016/j.compscitech.2011.08.014
  
  24-10-2011
• Wen PH, Sladek J and Sladek V (2011). "Three-dimensional analysis of functionally graded plates." International Journal For Numerical Methods in Engineering  vol. 87, (10) 923-942.
  DOI

  10.1002/nme.3139
  
  09-09-2011
• Chen CS, Fan CM and Wen PH (2011). "The method of approximate particular solutions for solving elliptic problems with variable coefficients." International Journal of Computational Methods  vol. 8, (3) 545-559.
  DOI

  10.1142/S0219876211002484
  
  01-09-2011
• Wen PH and M.H.Aliabadi F (2011). "Meshless Local Integral Equation Method with Analytical Formulation and its Application to Computational Fracture Mechanics."
  DOI

  10.4028/www.scientific.net/kem.488-489.791
  
  01-09-2011
• Tu W, Wen PH, Hogg PJ and Guild FJ (2011). "Optimisation of the protrusion geometry in Comeld™ joints." Composites Science and Technology  vol. 71, (6) 868-876.
  DOI

  10.1016/j.compscitech.2011.02.001
  
  12-04-2011
• Wen PH and Aliabadi MH (2011). "A variational approach for evaluation of stress intensity factors using the element free Galerkin method." International Journal of Solids and Structures  vol. 48, (7-8) 1171-1179.
  DOI

  10.1016/j.ijsolstr.2011.01.002
  
  01-04-2011
• Wen PH, Hon YC and Xu YG (2011). "Inverse heat conduction problems by using particular solutions." Heat Transfer - Asian Research  vol. 40, (2) 171-186.
  DOI

  10.1002/htj.20335
  
  01-01-2011
• Wen PH and Aliabadi MH (2011). "A variational technique for element free analysis of static and dynamic fracture mechanics." Key Engineering Materials  vol. 454, 31-46.
  DOI

  10.4028/www.scientific.net/KEM.454.31
  
  01-01-2011

2010

• Tu W, Wen P and Guild F (2010). "The optimization of Comeld™ joints: A novel technique for bonding composites and metal." Wce 2010 - World Congress On Engineering 2010  vol. 2, 1383-1385.
  
  01-12-2010
• Wen PH and Chen CS (2010). "The method of particular solutions for solving scalar wave equations." Int J Numer Meth Bio  vol. 26, (12) 1878-1889.
  DOI

  10.1002/cnm.1278
  
  01-12-2010
• Adetoro OB, Wen PH and Sim WM (2010). "A new damping modelling approach and its application in thin wall machining." International Journal of Advanced Manufacturing Technology  vol. 51, (5-8) 453-466.
  DOI

  10.1007/s00170-010-2658-7
  
  01-11-2010
• Adetoro OB, Vepa R, Sim WM and Wen PH (2010). "On the numerical prediction of stability in thin wall machining."
  DOI

  10.1007/978-90-481-8776-8_58
  
  01-07-2010
• Wen PH and Liu YW (2010). "The fundamental solution of poroelastic plate saturated by fluid and its applications." International Journal For Numerical and Analytical Methods in Geomechanics  vol. 34, (7) 689-709.
  DOI

  10.1002/nag.825
  
  01-05-2010
• Tu W, Wen PH and Guild FJ (2010). "Multi-region mesh free method for Comeld™ joints." Computational Materials Science  vol. 48, (3) 481-489.
  DOI

  10.1016/j.commatsci.2010.02.009
  
  01-05-2010
• Wen PH and Aliabadi MH (2010). "Elastic Moduli of Woven Fabric Composite by Meshless Local Petrov-Galerkin (MLPG) Method." Cmes-Comp Model Eng  vol. 61, (2) 133-154.
  
  01-05-2010
• Wen PH (2010). "Meshless local Petrov-Galerkin (MLPG) method for wave propagation in 3D poroelastic solids." Engineering Analysis With Boundary Elements  vol. 34, (4) 315-323.
  DOI

  10.1016/j.enganabound.2009.10.013
  
  01-04-2010
• Adetoro OB, Sim WM and Wen PH (2010). "An improved prediction of stability lobes using nonlinear thin wall dynamics." Journal of Materials Processing Technology  vol. 210, (6-7) 969-979.
  DOI

  10.1016/j.jmatprotec.2010.02.009

  Abstract
  
  01-04-2010
• Fang QH, Chen JM, Liu YW and Wen PH (2010). "Critical shear stress produced by interaction of edge dislocation with nanoscale inhomogeneity." Bulletin of Materials Science  vol. 33, (2) 123-127.
  DOI

  10.1007/s12034-010-0017-9
  
  01-04-2010
• Adetoro OB, Vepa R, Sim W-M and Wen PH (2010). "On the Numerical Prediction of Stability in Thin Wall Machining." Electronic Engineering and Computing Technology 
  DOI

  10.1007/978-90-481-8776-8_58
  
  24-02-2010
• Adetoro OB and Wen PH (2010). "Prediction of mechanistic cutting force coefficients using ALE formulation." International Journal of Advanced Manufacturing Technology  vol. 46, (1-4) 79-90.
  DOI

  10.1007/s00170-009-2079-7

  Abstract
  
  01-01-2010
• Wen PH and Dorrington GE (2010). "Simple method to predict balloon shape." P I Mech Eng G-J Aer  vol. 224, (G8) 897-904.
  DOI

  10.1243/09544100JAERO690
  
  01-01-2010

2009

• Sladek J, Sladek V, Wen PH and Hon YC (2009). "The inverse problem of determining heat transfer coefficients by the meshless local petrov-galerkin method." Cmes - Computer Modeling in Engineering and Sciences  vol. 48, (2) 191-218.
  
  01-12-2009
• Wen PH and Aliabadi MH (2009). "Boundary element formulations for Mindlin plate on an elastic foundation with dynamic load." Engineering Analysis With Boundary Elements  vol. 33, (10) 1161-1170.
  DOI

  10.1016/j.enganabound.2009.04.007
  
  01-10-2009
• Sladek J, Sladek V, Wen PH and Hon YC (2009). "Inverse fracture problems in piezoelectric solids by local integral equation method." Engineering Analysis With Boundary Elements  vol. 33, (8-9) 1089-1099.
  DOI

  10.1016/j.enganabound.2009.02.009
  
  01-08-2009
• Wen PH and Aliabadi MH (2009). "Evaluation of mixed-mode stress intensity factors by the mesh-free Galerkin method: static and dynamic." J Strain Anal Eng  vol. 44, (4) 273-286.
  DOI

  10.1243/03093247JSA509
  
  01-05-2009
• Wen PH and Aliabadi MH (2009). "Mesh-free micromechanical model for woven fabric composite elastic moduli." Journal of Multiscale Modeling  vol. 1, (2) 303-319.
  DOI

  10.1142/S175697370900013X
  
  01-04-2009
• Fang QH, Liu YW, Jin B and Wen PH (2009). "Effect of interface stresses on the image force and stability of an edge dislocation inside a nanoscale cylindrical inclusion." International Journal of Solids and Structures  vol. 46, (6) 1413-1422.
  DOI

  10.1016/j.ijsolstr.2008.11.013
  
  15-03-2009
• Fang QH, Liu YW, Jin B and Wen PH (2009). "Interaction between a dislocation and a core-shell nanowire with interface effects." International Journal of Solids and Structures  vol. 46, (6) 1539-1546.
  DOI

  10.1016/j.ijsolstr.2008.11.026
  
  15-03-2009
• Fang QH, Chen JH, Wen PH and Liu YW (2009). "Misfit dislocations in an annular strained film grown on a cylindrical nanopore surface." Scripta Materialia  vol. 60, (6) 395-398.
  DOI

  10.1016/j.scriptamat.2008.11.021
  
  01-03-2009
• Wen PH, Hon YC and Wang W (2009). "Dynamic responses of shear flows over a deformable porous surface layer in a cylindrical tube." Applied Mathematical Modelling  vol. 33, (1) 423-436.
  DOI

  10.1016/j.apm.2007.11.019
  
  01-01-2009
• Fang QH, Liu YW, Jin B and Wen PH (2009). "A piezoelectric screw dislocation in a three-phase composite cylinder model with an imperfect interface." International Journal of Engineering Science  vol. 47, (1) 39-49.
  DOI

  10.1016/j.ijengsci.2008.06.018
  
  01-01-2009
• Fang QH, Liu YW, Liu X and Wen PH (2009). "Screw dislocations interacting with a coated inhomogeneity containing two imperfect interfaces." Physica Status Solidi (B) Basic Research  vol. 246, (1) 32-44.
  DOI

  10.1002/pssb.200743528
  
  01-01-2009
• Fang QH, Liu YW and Wen PH (2009). "Dipole of edge misfit dislocations and critical radius conditions for buried strained cylindrical inhomogeneity." Philos Mag  vol. 89, (20) 1585-1595.
  DOI

  10.1080/14786430902932854
  
  01-01-2009
• Adetoro OB, Wen PH, Sim WM and Vepa R (2009). "Numerical and experimental investigation for stability lobes prediction in thin wall machining." Engineering Letters  vol. 17, (4)
  Abstract
  
  01-01-2009

2008

• Yu G, Wang H, Wen P and Rose JW (2008). "An inverse method to determine boundary temperature and heat flux for a 2D steady state heat conduction problem." Proceedings of The Asme Design Engineering Technical Conference  vol. 3, (PARTS A AND B) 1087-1093.
  DOI

  10.1115/DETC2008-49811
  
  01-12-2008
• Sladek J, Sladek V, Solek P, Wen PH and Atluri SN (2008). "Thermal analysis of Reissner-Mindlin shallow shells with FGM properties by the MLPG." Cmes - Computer Modeling in Engineering and Sciences  vol. 30, (2) 77-97.
  
  12-11-2008
• Wen PH, Aliabadi MH and Liu YW (2008). "Meshless method for crack analysis in functionally graded materials with enriched radial base functions." Cmes - Computer Modeling in Engineering and Sciences  vol. 30, (3) 133-147.
  
  10-11-2008
• Wen PH, Adetoro M and Xu Y (2008). "The fundamental solution of Mindlin plates with damping in the Laplace domain and its applications." Eng Anal Bound Elem  vol. 32, (10) 870-882.
  DOI

  10.1016/j.enganabound.2007.12.005
  
  01-10-2008
• Sladek J, Sladek V, Solek P and Wen PH (2008). "Thermal bending of Reissner-Mindlin plates by the MLPG." Cmes - Computer Modeling in Engineering and Sciences  vol. 28, (1) 57-76.
  
  15-08-2008
• Wen PH and Aliabadi MH (2008). "An improved meshless collocation method for elastostatic and elastodynamic problems." Communications in Numerical Methods in Engineering  vol. 24, (8) 635-651.
  DOI

  10.1002/cnm.977
  
  01-08-2008
• Fang QH, Liu Y, Huang BY, Liu YW and Wen PH (2008). "Contribution to critical shear stress of nanocomposites produced by interaction of screw dislocation with nanoscale inclusion." Materials Letters  vol. 62, (20) 3521-3523.
  DOI

  10.1016/j.matlet.2008.03.037
  
  31-07-2008
• Fang QH, Liu YW and Wen PH (2008). "Screw dislocations in a three-phase composite cylinder model with interface stress." Journal of Applied Mechanics, Transactions Asme  vol. 75, (4) 0410191-0410198.
  DOI

  10.1115/1.2913041
  
  01-07-2008
• Wang W and Wen PH (2008). "Interaction between micro-particles in Oseen flows by the method of fundamental solutions." Engineering Analysis With Boundary Elements  vol. 32, (4) 318-327.
  DOI

  10.1016/j.enganabound.2006.12.011
  
  01-04-2008
• Fang QH, Liu YW and Wen PH (2008). "A piezoelectric screw dislocation interacting with an elliptical inclusion containing electrically conductive interfacial rigid lines." International Journal of Mechanical Sciences  vol. 50, (4) 683-693.
  DOI

  10.1016/j.ijmecsci.2008.01.001
  
  01-04-2008
• Wen PH (2008). "The fundamental solution of Mindlin plates resting on an elastic foundation in the Laplace domain and its applications." International Journal of Solids and Structures  vol. 45, (3-4) 1032-1050.
  DOI

  10.1016/j.ijsolstr.2007.09.020
  
  01-02-2008
• Wen PH, Aliabadi MH, Sladek J and Sladek V (2008). "Displacement discontinuity method for cracked orthotropic strip: Dynamic." Wave Motion  vol. 45, (3) 293-308.
  DOI

  10.1016/j.wavemoti.2007.06.006
  
  01-01-2008

2007

• Wen PH and Aliabadi MH (2007). "Meshless method with enriched radial basis functions for fracture mechanics." Sid Structural Integrity and Durability  vol. 3, (2) 107-119.
  
  01-12-2007
• Wen PH and Hon YC (2007). "Geometrically nonlinear analysis of Reissner-Mindlin plate by meshless computation." Cmes - Computer Modeling in Engineering and Sciences  vol. 21, (3) 177-191.
  
  24-10-2007
• Wen PH and Aliabadi MH (2007). "Meshless method with enriched radial basis functions for fracture mechanics." Sdhm Structural Durability and Health Monitoring  vol. 3, (2) 107-119.
  
  06-09-2007
• Wen PH, Aliabadi MH and Wang W (2007). "Movement of a spherical cell in capillaries using a boundary element method." Journal of Biomechanics  vol. 40, (8) 1786-1793.
  DOI

  10.1016/j.jbiomech.2006.07.006
  
  10-05-2007
• Sladek J, Sladek V, Krivacek J, Wen PH and Zhang C (2007). "Meshless local Petrov-Galerkin (MLPG) method for Reissner-Mindlin plates under dynamic load." Computer Methods in Applied Mechanics and Engineering  vol. 196, (25-28) 2681-2691.
  DOI

  10.1016/j.cma.2007.01.014
  
  01-05-2007

2006

• Wen PH and Aliabadi MH (2006). "Displacement discontinuity formulation for modeling cracks in orthotropic shear deformable plates." International Journal of Fracture  vol. 142, (1-2) 69-79.
  DOI

  10.1007/s10704-006-9023-8
  
  01-11-2006
• Sladek J, Sladek V, Zhang C, Krivacek J and Wen PH (2006). "Analysis of orthotropic thick plates by meshless local Petrov-Galerkin (MLPG) method." International Journal For Numerical Methods in Engineering  vol. 67, (13) 1830-1850.
  DOI

  10.1002/nme.1683
  
  24-09-2006
• Wen PH and Aliabadi MH (2006). "Boundary element frequency domain formulation for dynamic analysis of Mindlin plates." International Journal For Numerical Methods in Engineering  vol. 67, (11) 1617-1640.
  DOI

  10.1002/nme.1676
  
  10-09-2006
• Sladek J, Sladek V, Wen PH and Aliabadi MH (2006). "Meshless Local Petrov-Galerkin (MLPG) method for shear deformable shells analysis." Cmes - Computer Modeling in Engineering and Sciences  vol. 13, (2) 103-117.
  
  16-06-2006
• Wen PH, Aliabadi MH and Young A (2006). "Post buckling analysis of Reissner plates by the boundary element method." J Strain Anal Eng  vol. 41, (3) 239-252.
  DOI

  10.1243/030932405X30939
  
  01-04-2006

2005

• Wen PH, Aliabadi MH and Zhang JZ (2005). "Displacement discontinuity method for fracture mechanics analysis of Reissner plates: static and dynamic." Int J Fracture  vol. 135, (1-4) 95-116.
  DOI

  10.1007/s10704-005-3945-4
  
  01-09-2005
• Wen PH, Aliabadi MH and Young A (2005). "Large deflection analysis of Reissner plate by boundary element method." Comput Struct  vol. 83, (10-11) 870-879.
  DOI

  10.1016/j.compstruc.2004.09.013
  
  01-04-2005

2004

• ALIABADI MH and Young A (2004). "Cracked growth analysis for multi-layered airframe structures by boundary element method." Engineering Fracture Mechanics  vol. 71, 619-632.
  DOI

  10.1016/s0013-7944(03)00021-3
  
  01-01-2004

2003

• Wen PH, Aliabadi MH and Young A (2003). "Boundary element analysis of curved cracked panels with adhesively bonded patches." Int J Numer Meth Eng  vol. 58, (1) 43-61.
  DOI

  10.1002/nme.747
  
  07-09-2003
• Wen PH, Aliabadi MH and Young A (2003). "Fracture mechanics analysis of curved stiffened panels using BEM." Int J Solids Struct  vol. 40, (1) 219-236.
  DOI

  10.1016/S0020-7683(02)00498-5
  
  01-01-2003
• Aliabadi MH, WEN P and Young A (2003). "Boundary element analysis of cracked panels with mechanically fastened repair patches." International Journal of Solids and Structures  vol. 40, 219-236.
  
  01-01-2003

2002

• Wen PH, Aliabadi MH and Young A (2002). "Boundary element analysis of flat cracked panels with adhesively bonded patches." Engineering Fracture Mechanics  vol. 69, (18) 2129-2146.
  DOI

  10.1016/S0013-7944(02)00012-7
  
  28-10-2002
• Wen PH, Aliabadi MH and Young A (2002). "Boundary element analysis of reinforced shear deformable shells." Int J Numer Meth Eng  vol. 54, (6) 789-808.
  DOI

  10.1002/nme.448
  
  30-06-2002
• Wen PH, Aliabadi MH and Young A (2002). "Boundary element analysis of shear deformable stiffened plates." Engineering Analysis With Boundary Elements  vol. 26, (6) 511-520.
  DOI

  10.1016/S0955-7997(02)00009-7
  
  01-06-2002
• Wen PH, Aliabadi MH and Young A (2002). "Boundary element analysis of cracked panels with mechanically fastened repair patches." Journal of Strain Analysis For Engineering Design  vol. 37, (3) 223-237.
  DOI

  10.1243/0309324021514989
  
  01-05-2002
• Aliabadi MH, WEN P and Salgado N (2002). "Boundary element analysis for damage tolerance asessment of aircraft panels." International Journal of Computer Applications in Technology  vol. 15, 147-156.
  
  01-01-2002
• Aliabadi MH, WEN P and Young A (2002). "Fracture mechanics analysis of curved stiffened panels using BEM." Eng Analysis With Boundary Element Method  vol. 26, 511-520.
  
  01-01-2002
• Aliabadi MH, WEN P and Young A (2002). "Boundary analysis of cracked panels with mechanically fastened repair patches." J. Strain Analysis For Engineering Design  vol. 37, 223-237.
  
  01-01-2002
• Aliabadi MH, Wen PH and Salgado N (2002). "Boundary element analysis for damage tolerance assessment of aircraft panels." International Journal of Computer Applications in Technology  vol. 15, (4-5) 147-156.
  DOI

  10.1504/IJCAT.2002.000290
  
  01-01-2002

2001

• Wen PH (2001). "Boundary element analysis of curved cracked panels with mechanically fastened repair patches." Cmes - Computer Modeling in Engineering and Sciences  vol. 3, (1) 1-10.
  
  01-12-2001

2000

• Wen PH, Aliabadi MH and Young A (2000). "Stiffened cracked plates analysis by dual boundary element method." Int J Fracture  vol. 106, (3) 245-258.
  DOI

  10.1023/A:1026583813252
  
  01-12-2000
• Wen PH, Aliabadi MH and Young A (2000). "A boundary element method for dynamic plate bending problems." International Journal of Solids and Structures  vol. 37, (37) 5177-5188.
  DOI

  10.1016/S0020-7683(99)00187-0
  
  11-09-2000
• Wen PH, Aliabadi MH and Young A (2000). "Application of dual reciprocity method to plates and shells." Engineering Analysis With Boundary Elements  vol. 24, (7-8) 583-590.
  DOI

  10.1016/s0955-7997(00)00038-2
  
  01-09-2000
• Wen PH, Aliabadi MH and Young A (2000). "Plane stress and plate bending coupling in BEM analysis of shallow shells." International Journal For Numerical Methods in Engineering  vol. 48, (8) 1107-1125.
  DOI

  10.1002/(SICI)1097-0207(20000720)48:8<1107::AID-NME913>3.0.CO;2-S
  
  20-07-2000

1999

• Wen PH, Aliabadi MH and Young A (1999). "A time-dependent formulation of dual boundary element method for 3D dynamic crack problems." International Journal For Numerical Methods in Engineering  vol. 45, (12) 1887-1905.
  DOI

  10.1002/(SICI)1097-0207(19990830)45:12<1887::AID-NME660>3.0.CO;2-Q
  
  30-08-1999
• Wen PH, Aliabadi MH and Young A (1999). "Dual boundary element methods for three-dimensional dynamic crack problems." The Journal of Strain Analysis For Engineering Design  vol. 34, (6) 373-394.
  DOI

  10.1177/030932479903400601
  
  01-08-1999
• Wen PH, Aliabadi MH and Young A (1999). "Transformation of domain integrals to boundary integrals in BEM analysis of shear deformable plate bending problems." Computational Mechanics  vol. 24, (4) 304-309.
  DOI

  10.1007/s004660050519
  
  01-01-1999
• Wen PH, Aliabadi MH and Young A (1999). "Dual boundary element methods for three-dimensional dynamic crack problems." Journal of Strain Analysis For Engineering Design  vol. 34, (6) 373-394.
  DOI

  10.1177/030932479903400601
  
  01-01-1999
• Wen PH, Aliabadi MH and Young A (1999). "Approximate dynamic crack frictional contact analysis for 3D structure." Journal of The Chinese Institute of Engineers, Transactions of The Chinese Institute of Engineers,Series a/Chung-Kuo Kung Ch'Eng  vol. 22, (6) 785-793.
  DOI

  10.1080/02533839.1999.9670514
  
  01-01-1999