Prof Sir Harry Bhadeshia
FRS FREng FIMMM

• Biography
• Research
• Funding
• Publications
• News
• Group Members

All Publications

Page 9 of 14

2004

• 39 Modelling and simulation
  Bhadeshia HKDH
  In Smithells Metals Reference Book, Elsevier 1-11.  
  DOI 10.1016/b978-075067509-3/50042-7
  
  01-01-2004
• Estimation of Type IV Cracking Tendency in Power Plant Steels
  Francis JA, Mazur W, Bhadeshia HKDH
  Isij International, Iron and Steel Institute of Japan vol. 44 (11) 
  DOI 10.2355/isijinternational.44.1966
  
  01-01-2004

2003

• Prediction of cooling rate and microstructure in laser spot welds
  De A, Walsh CA, Maiti SK, Bhadeshia HKDH
  Science and Technology of Welding & Joining, Sage Publications vol. 8 (6), 391-399.  
  DOI 10.1179/136217103225005633
  
  01-12-2003
• Effect of plastic deformation on the formation of acicular ferrite
  Lee CH, Bhadeshia HKDH, Lee H-C
  Materials Science and Engineering A, Elsevier vol. 360 (1-2), 249-257.  
  DOI 10.1016/s0921-5093(03)00477-5
  
  01-11-2003
• A tribute to Professor “Jack” Christian
  Bhadeshia HKDH
  The European Physical Journal Special Topics, Edp Sciences vol. 112, 17-25.  
  DOI 10.1051/jp4:2003835
  
  01-10-2003
• Avrami theory for transformations from non-uniform austenite grain structures
  Matsuda H, Bhadeshia HKDH
  Materials Science and Technology, Sage Publications vol. 19 (10), 1330-1334.  
  DOI 10.1179/026708303225002055
  
  01-10-2003
• Design of Creep-Resistant Ferritic-Steel Welding Alloys
  Bhadeshia HKDH
  Indian Welding Journal, The Indian Institute of Welding vol. 36 (4) 
  DOI 10.22486/iwj.v36i4.178775
  
  01-10-2003
• Finite element simulation of laser spot welding
  De A, Maiti SK, Walsh CA, Bhadeshia HKDH
  Science and Technology of Welding & Joining, Sage Publications vol. 8 (5), 377-384.  
  DOI 10.1179/136217103225005570
  
  01-10-2003
• Modelling and characterisation of V4C3 precipitation and cementite dissolution during tempering of Fe-C-V martensitic steel
  Yamasaki S, Bhadeshia HKDH
  Materials Science and Technology, Sage Publications vol. 19 (10), 1335-1343.  
  DOI 10.1179/026708303225005971
  
  01-10-2003
• Advances in the Kinetic Theory of Carbide Precipitation
  Bhadeshia HKDH
  Materials Science Forum, Trans Tech Publications vol. 426-432, 35-42.  
  DOI 10.4028/www.scientific.net/msf.426-432.35
  
  07-07-2003
• Design of Novel High-Strength Bainitic Steels
  Caballero FG, Bhadeshia HKDH
  Materials Science Forum, Trans Tech Publications vol. 426-432, 1337-1342.  
  DOI 10.4028/www.scientific.net/msf.426-432.1337
  
  07-07-2003
• New Welding Alloys:Computational Methods
  Svensson LE, Bhadeshia HKDH
  Indian Welding Journal, The Indian Institute of Welding vol. 36 (3) 
  DOI 10.22486/iwj.v36i3.178797
  
  01-07-2003
• Modelling and characterisation of Mo2C precipitation and cementite dissolution during tempering of Fe–C–Mo martensitic steel
  Yamasaki S, Bhadeshia HKDH
  Materials Science and Technology, Sage Publications vol. 19 (6), 723-731.  
  DOI 10.1179/026708303225002929
  
  01-06-2003
• Modelling simultaneous precipitation reactions in austenitic stainless steels
  Sourmail T, Bhadeshia HKDH
  Calphad, Elsevier vol. 27 (2), 169-175.  
  DOI 10.1016/j.calphad.2003.08.002
  
  01-06-2003
• Influence of Deformation on Recrystallization of an Yttrium Oxide Dispersion‐Strengthened Iron Alloy (PM2000)
  Montes CC, Bhadeshia HKDH
  Advanced Engineering Materials, Wiley vol. 5 (4), 232-237.  
  DOI 10.1002/adem.200300322
  
  23-04-2003
• Characteristics of high-power diode–laser welds for industrial assembly
  Walsh CA, Bhadeshia HKDH, Lau A, Matthias B, Oesterlein R, Drechsel J
  Journal of Laser Applications, Laser Institute of America vol. 15 (2), 68-76.  
  DOI 10.2351/1.1536642
  
  18-04-2003
• A model for austenitisation of hypoeutectoid steels
  Gaude-Fugarolas D, Bhadeshia HKDH
  Journal of Materials Science, Springer Nature vol. 38 (6), 1195-1201.  
  DOI 10.1023/a:1022805719924
  
  01-03-2003
• Design of a creep resistant nickel base superalloy for power plant applications: Part 1 - Mechanical properties modelling
  Tancret F, Bhadeshia HKDH, MacKay DJC
  Materials Science and Technology, Sage Publications vol. 19 (3), 283-290.  
  DOI 10.1179/026708303225009788
  
  01-03-2003
• Design of a creep resistant nickel base superalloy for power plant applications: Part 2 - Phase diagram and segregation simulation
  Tancret F, Bhadeshia HKDH
  Materials Science and Technology, Sage Publications vol. 19 (3), 291-295.  
  DOI 10.1179/026708303225009797
  
  01-03-2003
• Design of a creep resistant nickel base superalloy for power plant applications: Part 3 - Experimental results
  Tancret F, Sourmail T, Yescas MA, Evans RW, McAleese C, Singh L, Smeeton T, Bhadeshia HKDH
  Materials Science and Technology, Sage Publications vol. 19 (3), 296-302.  
  DOI 10.1179/026708303225009805
  
  01-03-2003
• 5.01 - Mechanisms and Models for Creep Deformation and Rupture
  Bhadeshia HKDH
  In Comprehensive Structural Integrity: Nine Volume Set 1-23.  
  DOI 10.1016/B0-08-043749-4/05106-5
  
  01-01-2003
• 5.01 Mechanisms and Models for Creep Deformation and Rupture
  Bhadeshia HKDH
  In Comprehensive Structural Integrity, Elsevier 1-23.  
  DOI 10.1016/b0-08-043749-4/05106-5
  
  01-01-2003
• Acceleration of Low-temperature Bainite
  Garcia-Mateo C, Caballero FG, Bhadeshia HKDH
  Isij International, Iron and Steel Institute of Japan vol. 43 (11) 
  DOI 10.2355/isijinternational.43.1821
  
  01-01-2003
• Development of Hard Bainite
  Garcia-Mateo C, Caballero FG, Bhadeshia HKDH
  Isij International, Iron and Steel Institute of Japan vol. 43 (8) 
  DOI 10.2355/isijinternational.43.1238
  
  01-01-2003
• Grain Boundary Mobility in Fe-Base Oxide Dispersion Strengthened PM2000 Alloy
  Capdevila C, Chen YL, Jones AR, Bhadeshia HKDH
  Isij International, Iron and Steel Institute of Japan vol. 43 (5) 
  DOI 10.2355/isijinternational.43.777
  
  01-01-2003
• Mechanisms and Models for Creep Deformation and Rupture
  Bhadeshia HKDH
  In Comprehensive Structural Integrity, Elsevier 2-25.  
  DOI 10.1016/b978-0-12-822944-6.00146-8
  
  01-01-2003
• Modelling and simulation
  Bhadeshia HKDH
  In Smithells Metals Reference Book 1-11.  
  DOI 10.1016/B978-075067509-3/50042-7
  
  01-01-2003
• Sensitisation and Evolution of Chromium-depleted Zones in Fe-Cr-Ni-C Systems
  Sourmail T, Too CH, Bhadeshia HKDH
  Isij International, Iron and Steel Institute of Japan vol. 43 (11) 
  DOI 10.2355/isijinternational.43.1814
  
  01-01-2003

2002

• Modeling M6C precipitation in niobium-alloyed ferritic stainless steel
  Fujita N, Kikuchi M, Bhadeshia HKDH
  Metallurgical and Materials Transactions A, Springer Nature vol. 33 (11), 3339-3347.  
  DOI 10.1007/s11661-002-0322-z
  
  01-11-2002
• Model for the maximum fraction of retained austenite in austempered ductile cast iron
  Yescas MA, Bhadeshia HKDH
  Materials Science and Engineering A, Elsevier vol. 333 (1-2), 60-66.  
  DOI 10.1016/s0921-5093(01)01840-8
  
  01-08-2002
• Neural network model of creep strength of austenitic stainless steels
  Sourmail T, Bhadeshia HKDH, MacKay DJC
  Materials Science and Technology, Sage Publications vol. 18 (6), 655-663.  
  DOI 10.1179/026708302225002065
  
  01-06-2002
• Theory for growth of needle-shaped particles in multicomponent systems
  Rivera-Díaz-Del-Castillo PEJ, Bhadeshia HKDH
  Metallurgical and Materials Transactions A, Springer Nature vol. 33 (4), 1075-1081.  
  DOI 10.1007/s11661-002-0209-z
  
  01-04-2002
• Very strong low temperature bainite
  Caballero FG, Bhadeshia HKDH, Mawella KJA, Jones DG, Brown P
  Materials Science and Technology, Sage Publications vol. 18 (3), 279-284.  
  DOI 10.1179/026708301225000725
  
  01-03-2002
• Diseño de nuevos aceros bainíticos.
  Caballero FG, Bhadeshia HKDH, Mawella KJA, Jones DG, Brown P
  Revista De Metalurgia, Editorial Csic vol. 38 (1), 3-13.  
  DOI 10.3989/revmetalm.2002.v38.i1.377
  
  28-02-2002
• Thermodynamics of Interfaces in Mechanically Alloyed Metals
  Bhadeshia HKDH
  In Science and Technology of Interfaces, Wiley 67-74.  
  DOI 10.1002/9781118788103.ch7
  
  01-02-2002
• Modelling Simultaneous Alloy Carbide Sequence in Power Plant Steels
  Fujita N, Bhadeshia HKDH
  Isij International, Iron and Steel Institute of Japan vol. 42 (7) 
  DOI 10.2355/isijinternational.42.760
  
  01-01-2002
• Steels for Rails, Novel
  Bhadeshia HKDH
  In Encyclopedia of Materials: Science and Technology, Elsevier 1-7.  
  DOI 10.1016/b0-08-043152-6/01836-2
  
  01-01-2002
• TRIP-Assisted Steels?
  Bhadeshia HKDH
  Isij International, Iron and Steel Institute of Japan vol. 42 (9) 
  DOI 10.2355/isijinternational.42.1059
  
  01-01-2002

2001

• Analysis of toughness of welding alloys for high strength low alloy shipbuilding steels
  Metzbower EA, DeLoach JJ, Lalam SH, Bhadeshia HKDH
  Science and Technology of Welding & Joining, Sage Publications vol. 6 (6), 368-374.  
  DOI 10.1179/stw.2001.6.6.368
  
  01-12-2001
• Strain heterogeneity and the production of coarse grains in mechanically alloyed iron-based PM2000 alloy
  Capdevila C, Miller U, Jelenak H, Bhadeshia HKDH
  Materials Science and Engineering A, Elsevier vol. 316 (1-2), 161-165.  
  DOI 10.1016/s0921-5093(01)01234-5
  
  01-11-2001
• Acicular ferrite morphologies in a medium-carbon microalloyed steel
  Madariaga I, Gutierrez I, Bhadeshia HKDH
  Metallurgical and Materials Transactions A, Springer Nature vol. 32 (9), 2187-2197.  
  DOI 10.1007/s11661-001-0194-7
  
  01-09-2001
• Manufacturing and Microstructural Evolution of Mechanuically Alloyed Oxide Dispersion Strengthened Superalloys
  Capdevila C, Bhadeshia HKDH
  Advanced Engineering Materials, Wiley vol. 3 (9), 647-656.  
  DOI 10.1002/1527-2648(200109)3:9<647::aid-adem647>3.0.co;2-4
  
  01-09-2001
• Coupled diffusional/displacive transformations: addition of substitutional alloying elements
  Mujahid SA, Bhadeshia HKDH
  Journal of Physics D, IOP Publishing vol. 34 (17) 
  DOI 10.1088/0022-3727/34/17/301
  
  21-08-2001
• Estimation of the amount of retained austenite in austempered ductile irons using neural networks
  Yescas MA, Bhadeshia HKDH, MacKay DJ
  Materials Science and Engineering A, Elsevier vol. 311 (1-2), 162-173.  
  DOI 10.1016/s0921-5093(01)00913-3
  
  01-07-2001
• Heterogeneous deformation and recrystallisation of iron base oxide dispersion strengthened PM2000 alloy
  Capdevila C, Chen YL, Lassen NCK, Jones AR, Bhadeshia HKDH
  Materials Science and Technology, Sage Publications vol. 17 (6), 693-699.  
  DOI 10.1179/026708301101510410
  
  01-06-2001
• Design of novel high strength bainitic steels: Part 1
  Caballero FG, Bhadeshia HKDH, Mawella KJA, Jones DG, Brown P
  Materials Science and Technology, Sage Publications vol. 17 (5), 512-516.  
  DOI 10.1179/026708301101510348
  
  01-05-2001
• Design of novel high strength bainitic steels: Part 2
  Caballero FG, Bhadeshia HKDH, Mawella KJA, Jones DG, Brown P
  Materials Science and Technology, Sage Publications vol. 17 (5), 517-522.  
  DOI 10.1179/026708301101510357
  
  01-05-2001
• Modelling precipitation of niobium carbide in austenite: Multicomponent diffusion, capillarity, and coarsening
  Fujita N, Bhadeshia HKDH
  Materials Science and Technology, Sage Publications vol. 17 (4), 403-408.  
  DOI 10.1179/026708301101510122
  
  01-04-2001
• Neural network analysis of strength and ductility of welding alloys for high strength low alloy shipbuilding steels
  Metzbower EA, deLoach JJ, Lalam SH, Bhadeshia HKDH
  Science and Technology of Welding & Joining, Sage Publications vol. 6 (2), 116-124.  
  DOI 10.1179/136217101101538622
  
  01-04-2001
• Residual stress. Part 1 – Measurement techniques
  Withers PJ, Bhadeshia HKDH
  Materials Science and Technology, Sage Publications vol. 17 (4), 355-365.  
  DOI 10.1179/026708301101509980
  
  01-04-2001

« Previous 50  Next 50 »