Prof Sir Harry Bhadeshia
FRS FREng FIMMM

 

All Publications

Page 4 of 14

2014

  • Physical Metallurgy of Steels
    Bhadeshia HKDH
    In Physical Metallurgy: Fifth Edition 2157-2214.  
    05-12-2014
  • Segregation of phosphorus to ferrite grain boundaries during transformation in an Fe–P alloy
    Kim JI, Pak JH, Park K-S, Jang JH, Suh D-W and Bhadeshia HKDH
    International Journal of Materials Research (Formerly Zeitschrift Fuer Metallkunde), De Gruyter vol. 105 (12), 1166-1172.  
    05-12-2014
  • Cracks in Martensite Plates as Hydrogen Traps in a Bearing Steel
    Solano-Alvarez W, Song EJ, Han DK, Suh D-W and Bhadeshia HKDH
    Metallurgical and Materials Transactions A, Springer Nature vol. 46 (2), 665-673.  
    03-12-2014
  • Bearing steel microstructures after aircraft gas turbine engine service
    Nygaard JR, Rawson M, Danson P and Bhadeshia HKDH
    Materials Science and Technology, Sage Publications vol. 30 (15), 1911-1918.  
    01-12-2014
  • Degradation of nanostructured bainitic steel under rolling contact fatigue
    Solano-Alvarez W, Pickering EJ and Bhadeshia HKDH
    Materials Science and Engineering A, Elsevier vol. 617, 156-164.  
    01-11-2014
  • Selective oxidation of Al rich Fe–Mn–Al–C low density steels
    Jeong TK, Jung G, Lee K, Kang YB, Bhadeshia HKDH and Suh D-W
    Materials Science and Technology, Sage Publications vol. 30 (14), 1805-1814.  
    01-11-2014
  • Effect of tempering upon the tensile properties of a nanostructured bainitic steel
    Hasan HS, Peet MJ, Avettand-Fènoël M-N and Bhadeshia HKDH
    Materials Science and Engineering A, Elsevier vol. 615, 340-347.  
    01-10-2014
  • Surface residual stresses in multipass welds produced using low transformation temperature filler alloys
    Ramjaun TI, Stone HJ, Karlsson L, Gharghouri MA, Dalaei K, Moat RJ and Bhadeshia HKDH
    Science and Technology of Welding & Joining, Sage Publications vol. 19 (7), 623-630.  
    01-10-2014
  • Mechanical Twinning in Aircraft Engine Bearing Steel
    Nygaard JR, Vegter RH, Rawson M, Danson P and Bhadeshia HKDH
    In Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies For Rolling Bearings, Astm International 1-13.  
    30-09-2014
  • Interaction of aluminium with hydrogen in twinning-induced plasticity steel
    Song EJ, Bhadeshia HKDH and Suh D-W
    Scripta Materialia, Elsevier vol. 87, 9-12.  
    01-09-2014
  • Spheroidisation of hypereutectoid state of nanostructured bainitic steel
    Luo D, Peet MJ, Ooi SW, Yan P, Yin Z and Bhadeshia HKDH
    Materials Science and Technology, Sage Publications vol. 30 (11), 1282-1286.  
    01-09-2014
  • Hydrogen diffusion and the percolation of austenite in nanostructured bainitic steel
    Fielding LCD, Song EJ, Han DK, Bhadeshia HKDH and Suh D-W
    Proceedings of The Royal Society A, The Royal Society vol. 470 (2168) 
    08-08-2014
  • Dry rolling/sliding wear of nanostructured bainite
    Bakshi SD, Leiro A, Prakash B and Bhadeshia HKDH
    Wear, Elsevier vol. 316 (1-2), 70-78.  
    01-08-2014
  • Effects of dilution and baseplate strength on stress distributions in multipass welds deposited using low transformation temperature filler alloys
    Ramjaun TI, Stone HJ, Karlsson L, Kelleher J, Ooi SW, Dalaei K, Kornmeier JR and Bhadeshia HKDH
    Science and Technology of Welding & Joining, Sage Publications vol. 19 (6), 461-467.  
    01-08-2014
  • Adventures in the physical metallurgy of steels
    Bhadeshia HKDH
    Materials Science and Technology, Sage Publications vol. 30 (9), 995-997.  
    01-07-2014
  • Friction stir welding of mild steel: Tool durability and steel microstructure
    De A, Bhadeshia HKDH and DebRoy T
    Materials Science and Technology, Sage Publications vol. 30 (9), 1050-1056.  
    01-07-2014
  • Austenite in Transformation-Induced Plasticity Steel Subjected to Multiple Isothermal Heat Treatments
    Duong VT, Song YY, Park K-S, Bhadeshia HKDH and Suh D-W
    Metallurgical and Materials Transactions A, Springer Nature vol. 45 (10), 4201-4209.  
    18-06-2014
  • Hydrogen and aluminium in high-manganese twinning-induced plasticity steel
    Han K, Kim YM, Han HN, Bhadeshia HKDH and Suh D-W
    Scripta Materialia, Elsevier vol. 80, 9-12.  
    01-06-2014
  • Shear band structure in ballistically tested bainitic steels
    Fielding LCD and Bhadeshia HKDH
    Materials Science and Technology, Sage Publications vol. 30 (7), 812-817.  
    01-06-2014
  • An integrated hot rolling and microstructure model for dual-phase steels
    Bombac D, Peet MJ, Zenitani S, Kimura S, Kurimura T and Bhadeshia HKDH
    Modelling and Simulation in Materials Science and Engineering, Iop Publishing vol. 22 (4) 
    25-04-2014
  • Second set of comments on ‘Determination of Ms temperature: methods, meaning and influence of ‘slow start’ phenomenon’ by T. Sourmail and V. Smanio
    Bhadeshia HKDH
    Materials Science and Technology, Sage Publications vol. 30 (4), 510-510.  
    01-04-2014
  • Toughness anisotropy in X70 and X80 linepipe steels
    Joo MS, Suh D-W, Bae J-H and Bhadeshia HKDH
    Materials Science and Technology, Sage Publications vol. 30 (4), 439-446.  
    01-04-2014
  • Optimizing the Morphology and Stability of Retained Austenite in a δ-TRIP Steel
    Yi HL, Chen P and Bhadeshia HKDH
    Metallurgical and Materials Transactions A, Springer Nature vol. 45 (8), 3512-3518.  
    25-03-2014
  • Macrosegregation and Microstructural Evolution in a Pressure-Vessel Steel
    Pickering EJ and Bhadeshia HKDH
    Metallurgical and Materials Transactions A, Springer Nature vol. 45 (7), 2983-2997.  
    11-03-2014
  • Coalesced Martensite in Pressure Vessel Steels
    Pous-Romero H and Bhadeshia H
    Journal of Pressure Vessel Technology, Asme International vol. 136 (3) 
    27-02-2014
  • The Consequences of Macroscopic Segregation on the Transformation Behavior of a Pressure-Vessel Steel
    Pickering EJ and Bhadeshia HKDH
    Journal of Pressure Vessel Technology, Asme International vol. 136 (3) 
    27-02-2014
  • Model for multiple stress affected martensitic transformations, microstructural entropy and consequences on scatter in properties
    Bhadeshia HKDH, Chintha A and Kundu S
    Materials Science and Technology, Sage Publications vol. 30 (2), 160-165.  
    01-02-2014
  • 21 Physical Metallurgy of Steels
    Bhadeshia HKDH
    In Physical Metallurgy, Elsevier 2157-2214.  
    01-01-2014
  • 9 Phase Transformations Nondiffusive
    Bhadeshia HKDH and Wayman CM
    In Physical Metallurgy, Elsevier 1021-1072.  
    01-01-2014
  • Computational design of advanced steels
    Bhadeshia HKDH
    Scripta Materialia, Elsevier vol. 70, 12-17.  
    01-01-2014
  • Development of Ir-based alloy tool for FSW paper wins the inaugural Science and Technology of Welding and Joining Best Paper Prize

    Science and Technology of Welding & Joining, Sage Publications vol. 19 (1), 1-1.  
    01-01-2014
  • Dissolution Behaviour of NbC during Slab Reheating
    Lee H, Park K-S, Lee JH, Heo Y-U, Suh D-W and Bhadeshia HKDH
    Isij International, Iron and Steel Institute of Japan vol. 54 (7) 
    01-01-2014
  • Effect of interpass temperature on residual stresses in multipass welds produced using low transformation temperature filler alloy
    Ramjaun T, Stone HJ, Karlsson L, Kelleher J, Moat RJ, Kornmeier JR, Dalaei K and Bhadeshia HKDH
    Science and Technology of Welding & Joining, Sage Publications vol. 19 (1), 44-51.  
    01-01-2014
  • List of Contributors to Volume I
    Balogh Z, Banerjee DK, Bhadeshia HKDH, Boettinger WJ, Greer AL, Hiroshi N, Inukai M, Laughlin DE, Mizutani U, Pelton AD, Sato H, Schmitz G, Soffa WA, Steurer W, Wayman CM and Zijlstra ES
    In Physical Metallurgy, Elsevier 
    01-01-2014
  • List of Contributors to Volume III
    Bhadeshia HKDH, Chen L-Q, Goodall R, Gu Y, Kirchheim R, Mortensen A, Nie J-F, Pundt A, Raabe D, Rae CMF, Reed RC and Wilde G
    In Physical Metallurgy, Elsevier 
    01-01-2014

2013

« Previous 50  Next 50 »