Prof Sir Harry Bhadeshia
FRS FREng FIMMM
All Publications
Page 2 of 13
2019
- Bhadeshia HKDH (2019). Carbide Precipitation. In Bainite in Steels, Taylor & Francis 61-86.
15-04-2019 - Bhadeshia HKDH (2019). From Bainite to Austenite. In Bainite in Steels, Taylor & Francis 239-250.
15-04-2019 - Bhadeshia HKDH (2019). Introduction. In Bainite in Steels, Taylor & Francis 1-16.
15-04-2019 - Bhadeshia HKDH (2019). Kinetics. In Bainite in Steels, Taylor & Francis 131-194.
15-04-2019 - Bhadeshia HKDH (2019). Mechanical Properties. In Bainite in Steels, Taylor & Francis 303-366.
15-04-2019 - Bhadeshia HKDH (2019). Modern Bainitic Steels. In Bainite in Steels, Taylor & Francis 367-454.
15-04-2019 - Bhadeshia HKDH (2019). Nanostructured Bainite. In Bainite in Steels, Taylor & Francis 455-494.
15-04-2019 - Bhadeshia HKDH (2019). Other Aspects. In Bainite in Steels, Taylor & Francis 495-508.
15-04-2019 - Bhadeshia HKDH (2019). Other Morphologies Of Bainite. In Bainite in Steels, Taylor & Francis 287-302.
15-04-2019 - Bhadeshia HKDH (2019). Stress and Strain Effects. In Bainite in Steels, Taylor & Francis 207-238.
15-04-2019 - Bhadeshia HKDH (2019). Tempering of Bainite. In Bainite in Steels, Taylor & Francis 87-116.
15-04-2019 - Bhadeshia HKDH (2019). The Transformations in Steel. In Bainite in Steels, Taylor & Francis 509-514.
15-04-2019 - Bhadeshia HKDH (2019). Upper and Lower Bainite. In Bainite in Steels, Taylor & Francis 195-206.
15-04-2019 - Chintha AR, Valtonen K, Kuokkala V-T, Kundu S, Peet MJ and Bhadeshia HKDH (2019). Role of fracture toughness in impact-abrasion wear. Wear, Elsevier vol. 428, 430-437.
05-04-2019 - Fallah GMAME and Bhadeshia HKDH (2019). Tensile behaviour of thermally-stable nanocrystalline bainitic-steels. Materials Science and Engineering A, Elsevier vol. 746, 145-153.
01-02-2019 - Bhadeshia HKDH (2019). Cementite. International Materials Reviews, Sage Publications vol. 65 (1), 1-27.
11-01-2019
2018
- Hulme-Smith CN, Ooi SW and Bhadeshia HKDH (2018). Intermetallic-strengthened nanocrystalline bainitic steel. Materials Science and Technology, Sage Publications vol. 34 (16), 1976-1979.
01-11-2018 - Ooi SW, Ramjaun TI, Hulme-Smith C, Morana R, Drakopoulos M and Bhadeshia HKDH (2018). Designing steel to resist hydrogen embrittlement Part 2 – precipitate characterisation. Materials Science and Technology, Sage Publications vol. 34 (14), 1747-1758.
01-09-2018 - Ramjaun TI, Ooi SW, Morana R and Bhadeshia HKDH (2018). Designing steel to resist hydrogen embrittlement: Part 1 – trapping capacity. Materials Science and Technology, Sage Publications vol. 34 (14), 1737-1746.
01-09-2018 - Bhadeshia HKDH (2018). Solution to the Bagaryatskii and Isaichev ferrite–cementite orientation relationship problem. Materials Science and Technology, Sage Publications vol. 34 (14), 1666-1668.
01-09-2018 - Sun L, Simm TH, Martin TL, McAdam S, Galvin DR, Perkins KM, Bagot PAJ, Moody MP, Ooi SW, Hill P, Rawson MJ and Bhadeshia HKDH (2018). A novel ultra-high strength maraging steel with balanced ductility and creep resistance achieved by nanoscale β-NiAl and Laves phase precipitates. Acta Materialia, Elsevier vol. 149, 285-301.
01-05-2018 - Bhadeshia HKDH (2018). Editorial. Materials Science and Technology, Sage Publications vol. 34 (7), 763-765.
01-05-2018 - Moat RJ, Ooi S, Shirzadi AA, Dai H, Mark AF, Bhadeshia HKDH and Withers PJ (2018). Residual stress control of multipass welds using low transformation temperature fillers. Materials Science and Technology, Sage Publications vol. 34 (5), 519-528.
01-03-2018 - Guo L, Roelofs H, Lembke MI and Bhadeshia HKDH (2018). Modelling of size distribution of blocky retained austenite in Si-containing bainitic steels. Materials Science and Technology, Sage Publications vol. 34 (1), 54-62.
01-01-2018
2017
- Bhadeshia HKDH (2017). Atomic Mechanism of the Bainite Transformation. Htm Journal of Heat Treatment and Materials, De Gruyter vol. 72 (6), 340-345.
13-12-2017 - Cota AB, Ooi SW, Solano-Alvarez W and Bhadeshia HKDH (2017). Infusion of hydrogen into nanostructured bainitic steel. Materials Characterization, Elsevier vol. 134, 96-102.
01-12-2017 - Simm TH, Sun L, Galvin DR, Hill P, Rawson M, Birosca S, Gilbert EP, Bhadeshia H and Perkins K (2017). The Effect of a Two-Stage Heat-Treatment on the Microstructural and Mechanical Properties of a Maraging Steel. Materials, Mdpi vol. 10 (12)
23-11-2017 - Guo L, Bhadeshia HKDH, Roelofs H and Lembke MI (2017). In situ synchrotron X-ray study of bainite transformation kinetics in a low-carbon Si-containing steel. Materials Science and Technology, Sage Publications vol. 33 (17), 2147-2156.
01-11-2017 - Solano-Alvarez W, Peet MJ, Pickering EJ, Jaiswal J, Bevan A and Bhadeshia HKDH (2017). Synchrotron and neural network analysis of the influence of composition and heat treatment on the rolling contact fatigue of hypereutectoid pearlitic steels. Materials Science and Engineering A, Elsevier vol. 707, 259-269.
01-11-2017 - Bhadeshia HKDH (2017). Geometry of Crystals, Polycrystals, and Phase Transformations.
05-09-2017 - Hulme-Smith CN and Bhadeshia HKDH (2017). Erratum to ‘Mechanical properties of thermally-stable, nanocrystalline bainitic steels’ [Materials Science & Engineering A 700 (2017) 714–720]. Materials Science and Engineering A, Elsevier vol. 704
01-09-2017 - Hulme-Smith CN, Ooi SW and Bhadeshia HKDH (2017). Thermally Stable Nanocrystalline Steel. Metallurgical and Materials Transactions A, Springer Nature vol. 48 (10), 4957-4964.
09-08-2017 - Simm TH, Sun L, Galvin DR, Gilbert EP, Venero DA, Li Y, Martin TL, Bagot PAJ, Moody MP, Hill P, Bhadeshia HKDH, Birosca S, Rawson MJ and Perkins KM (2017). A SANS and APT study of precipitate evolution and strengthening in a maraging steel. Materials Science and Engineering A, Elsevier vol. 702, 414-424.
01-08-2017 - Bhadeshia HKDH (2017). Extremely strong steels - The mechanism and prevention of hydrogen embrittlement: 2017 AIST howe memorial lecture. Iron and Steel Technology vol. 14 (8), 49-55.
01-08-2017 - Hulme-Smith CN and Bhadeshia HKDH (2017). Mechanical properties of thermally-stable, nanocrystalline bainitic steels. Materials Science and Engineering A, Elsevier vol. 700, 714-720.
01-07-2017 - Guo L, Roelofs H, Lembke MI and Bhadeshia HKDH (2017). Modelling of recalescence effect on austenite decomposition. Materials Science and Technology, Sage Publications vol. 33 (10), 1258-1267.
01-07-2017 - Peet MJ, Fielding LCD, Hamedany AA, Rawson M, Hill P and Bhadeshia HKDH (2017). Strength and toughness of clean nanostructured bainite. Materials Science and Technology, Sage Publications vol. 33 (10), 1171-1179.
01-07-2017 - Guo L, Roelofs H, Lembke MI and Bhadeshia HKDH (2017). Effect of manganese sulphide particle shape on the pinning of grain boundary. Materials Science and Technology, Sage Publications vol. 33 (8), 1013-1018.
01-05-2017 - Rogal Ł, Solano-Alvarez W and Bhadeshia HKDH (2017). Melt-spinning and semi-solid processing of bainitic steel. Materials Science and Technology, Sage Publications vol. 33 (7), 870-878.
01-05-2017 - Peet MJ, Babu SS, Miller MK and Bhadeshia HKDH (2017). Tempering of Low-Temperature Bainite. Metallurgical and Materials Transactions A, Springer Nature vol. 48 (7), 3410-3418.
10-04-2017 - Bhadeshia HKDH and Honeycombe RWK (2017). Steels: Microstructure and Properties: Fourth Edition.
02-02-2017 - Peet MJ, Hasan HS, Avettand-Fènoël M-N, Raubye SHA and Bhadeshia HKDH (2017). Low-temperature transformation to bainite in a medium-carbon steel. International Journal of Materials Research (Formerly Zeitschrift Fuer Metallkunde), De Gruyter vol. 108 (2), 89-98.
31-01-2017 - Bhadeshia H (2017). Editorial. Materials Science and Technology, Sage Publications vol. 33 (1), 1-1.
02-01-2017 - Bhadeshia H and Honeycombe R (2017). Chapter 1 Iron and Its Interstitial Solutions. In Steels: Microstructure and Properties, Elsevier 1-22.
01-01-2017 - Bhadeshia H and Honeycombe R (2017). Chapter 10 Thermomechanical Treatment of Steels. In Steels: Microstructure and Properties, Elsevier 271-301.
01-01-2017 - Bhadeshia H and Honeycombe R (2017). Chapter 11 The Embrittlement and Fracture of Steels. In Steels: Microstructure and Properties, Elsevier 303-341.
01-01-2017 - Bhadeshia H and Honeycombe R (2017). Chapter 12 Stainless Steel. In Steels: Microstructure and Properties, Elsevier 343-376.
01-01-2017 - Bhadeshia H and Honeycombe R (2017). Chapter 13 Weld Microstructures. In Steels: Microstructure and Properties, Elsevier 377-400.
01-01-2017 - Bhadeshia H and Honeycombe R (2017). Chapter 14 Nanostructured Steels. In Steels: Microstructure and Properties, Elsevier 401-419.
01-01-2017 - Bhadeshia H and Honeycombe R (2017). Chapter 15 Modelling of Structure and Properties. In Steels: Microstructure and Properties, Elsevier 421-455.
01-01-2017