Dr Adrian Briggs
BSc (Eng) PhD (Lond)
All Publications
2019
- Zeinelabdeen MIM, Kamran MS and Briggs A (2019). New Empirical Models for Condensation on Banks of Plain Tubes. Heat and Mass Transfer, Springer Nature vol. 56 (2), 407-421.
03-08-2019
2018
- Zeinelabdeen MIM, Kamran MS and Briggs A (2018). Comparison of empirical models with an experimental database for condensation on banks of tubes. International Journal of Heat and Mass Transfer, Elsevier vol. 122, 765-774.
01-07-2018
2015
- Ali HM and Briggs A (2015). A semi-empirical model for free-convection condensation on horizontal pin-fin tubes. International Journal of Heat and Mass Transfer vol. 81, 157-166.
01-01-2015
2014
- Ali HM and Briggs A (2014). An investigation of condensate retention on pin-fin tubes. Applied Thermal Engineering vol. 63 (2), 503-510.
22-02-2014
2013
- Ali HM and Briggs A (2013). Condensation heat transfer on pin-fin tubes: Effect of thermal conductivity and pin height. Applied Thermal Engineering vol. 60 (1-2), 465-471.
01-10-2013 - Ali HM and Briggs A (2013). An investigation of condensate retention on pin-fin tubes. Applied Thermal Engineering
01-01-2013 - Ali H, Wang HS, Briggs A and Rose JW (2013). Effects of vapor velocity and pressure on Marangoni condensation of steam-ethanol mixtures on a horizontal tube. Journal of Heat Transfer: Transactions of The Asme vol. 135 (3)
01-01-2013
2012
- Ali HM and Briggs A (2012). Condensation of ethylene glycol on pin-fin tubes: Effect of circumferential pin spacing and thickness. Applied Thermal Engineering vol. 49, 9-13.
31-12-2012 - Ali HM and Briggs A (2012). Condensation of R-113 on pin-fin tubes: Effect of circumferential pin thickness and spacing. Heat Transfer Engineering vol. 33 (3), 205-212.
01-02-2012 - Fitzgerald CL, Briggs A, Rose JW and Wang HS (2012). Effect of vapour velocity on condensate retention between fins during condensation on low-finned tubes. International Journal of Heat and Mass Transfer vol. 55 (4), 1412-1418.
31-01-2012 - Ali HM and Briggs A (2012). Enhanced condensation of ethylene glycol on single pin-fin tubes: Effect of pin geometry. Journal of Heat Transfer vol. 134 (1)
01-01-2012
2010
- Fitzgerald CL, Briggs A, Wang H and Rose JW (2010). Effect of Vapour Velocity on Condensation of Ethylene Glycol on Horizontal Integral Fin Tubes: Heat Transfer and Retention Angle Measurements.
01-01-2010
2007
- Namasivayam S and Briggs A (2007). Effect of vapor velocity on condensation of low-pressure steam on integral-fin tubes. Journal of Heat Transfer vol. 129 (11), 1486-1493.
01-11-2007
2005
- Murase T, Briggs A, Wang HS and Rose JW (2005). Condensation on a horizontal wire-wrapped tube. Journal of Heat Transfer vol. 127 (11), 1207-1213.
01-11-2005 - Briggs A and Bui HH (2005). Condensation of vapour on sub-cooled liquid columns - Application to the thermal design of shell-and-tube condensers. International Journal of Energy Research vol. 29 (10), 913-921.
01-08-2005 - Briggs A and Sabaratnam S (2005). Condensation from pure steam and steam-air mixtures on integral-fin tubes in a bank. J Heat Trans-T Asme vol. 127 (6), 571-580.
01-06-2005
2004
- Ma X, Briggs A and Rose JW (2004). Heat transfer and pressure drop characteristics for condensation of R113 in a vertical micro-finned tube with wire insert. International Communications in Heat and Mass Transfer vol. 31 (5), 619-627.
01-07-2004 - Namasivayam S and Briggs A (2004). Forced-convection condensation of ethylene glycol on integral-fin tubes. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd vol. 375 (2), 613-619.
01-01-2004
2003
- Briggs A, Wang HS, Murase T and Rose JW (2003). Heat Transfer Measurements for Condensation of Steam on a Horizontal Wire-Wrapped Tube. Journal of Enhanced Heat Transfer vol. 10 (4), 355-362.
01-10-2003 - Briggs A and Sabaratnam S (2003). Condensation of steam on integral-fin tubes in a bank. Proceedings of The Asme Summer Heat Transfer Conference vol. 2003, 639-647.
01-01-2003 - Briggs A (2003). Enhanced condensation of r-113 and steam using three-dimensional pin-fin tubes. Experimental Heat Transfer vol. 16 (1), 61-79.
01-01-2003
2000
- Briggs A, Kelemenis C and Rose JW (2000). Heat transfer and pressure drop measurements for in-tube condensation of cfc-113 using microfin tubes and wire inserts. Experimental Heat Transfer vol. 13 (3), 163-181.
01-01-2000
1999
- Briggs A, Kelemenis C and Rose JW (1999). Heat transfer and pressure drop during in-tube condensation from CFC-113/air mixtures using a wire insert. Heat and Technology vol. 17 (2), 57-61.
01-12-1999 - Briggs A and Rose JW (1999). An evaluation of models for condensation heat transfer on low-finned tubes. Journal of Enhanced Heat Transfer vol. 6 (1), 51-60.
01-01-1999
1995
- BRIGGS A and ROSE JW (1995). CONDENSATION PERFORMANCE OF SOME COMMERCIAL INTEGRAL FIN TUBES WITH STEAM AND CFC113. Exp Heat Transfer vol. 8 (2), 131-143.
01-04-1995 - Abdullah R, Cooper JR, Briggs A and Rose JW (1995). Condensation of steam and R113 on a bank of horizontal tubes in the presence of a noncondensing gas. Experimental Thermal and Fluid Science vol. 10 (3), 298-306.
01-01-1995
1994
- Briggs A and Rose JW (1994). Effect of fin efficiency on a model for condensation heat transfer on a horizontal, integral-fin tube. International Journal of Heat and Mass Transfer vol. 37 (SUPPL. 1), 457-463.
01-01-1994 - Wen XL, Briggs A and Rose JW (1994). Enhancement of condensation heat transfer on integral-fin tubes using radiused fin-root fillets. Journal of Enhanced Heat Transfer vol. 1 (2), 211-217.
01-01-1994