Dr Yamin Abdouni
BSc, MSc, PhD
All Publications
Page 198 of 315
2012
- Biomechanical conditioning enhanced matrix synthesis in nucleus pulposus cells cultured in agarase constructs with TGFβ
CHOWDHURY TT, Tilwani RK, Bader DL, Goldsmith EC, Lin SK
Journal Functional Biomaterials vol. 3, 23-26.
05-01-2012 - Hierarchical fiber bundle model to investigate the complex architectures of biological materials
Pugno NM, Bosia F
Physical Review E Statistical Nonlinear and Soft Matter Physics vol. 85 (1)
05-01-2012 - Injectable biodegradable starch/chitosan delivery system for the sustained release of gentamicin to treat bone infections
Balmayor ER, Baran ET, Azevedo HS, Reis RL
Carbohydrate Polymers vol. 87 (1), 32-39.
04-01-2012 - The applicability of reflectance micro-Fourier-transform infrared spectroscopy for the detection of synthetic microplastics in marine sediments
Harrison JP, Romero-González ME
The Science of The Total Environment, Elsevier vol. 416, 455-463.
04-01-2012 - Use of ambient light in remote photoplethysmographic systems: comparison between a high-performance camera and a low-cost webcam. - 037005-10
Sun Y, Azorin-Peris V, Kalawsky R, GREENWALD SE
Journal of Biomedical Optics, Spie Digital Library vol. 17 (3), 037005-1-037005-10.
04-01-2012 - Structure and chemistry of the Si(111)/AlN interface
Radtke G, Couillard M, Botton GA, Zhu D, Humphreys CJ
Applied Physics Letters, Aip Publishing vol. 100 (1)
02-01-2012 - 3.4 Characterisation of the Two-Layered Media in the Mammalian Carotid Artery
Evagora C, Hillery C, Timmins LH, Das E, Badye S, Moore JE, Martin JE, Greenwald SE
Artery Research, Springer Nature vol. 6 (4), 146-146.
01-01-2012 - A stiffness probe based on force and vision sensing for soft tissue diagnosis
Li J, Liu H, Seneviratne LD
Annual International Conference of The IEEE Engineering in Medicine and Biology Society (Embc), Institute of Electrical and Electronics Engineers (IEEE) vol. 2012, 944-947.
01-01-2012 - A systematic review of resting left ventricular systolic and diastolic function and adaptation in elite weightlifters.
Dhamu H, Malliaras P, Twycross-Lewis R, Maffulli N
Br Med Bull vol. 104, 129-141.
01-01-2012 - Accelerated growth plate mineralization and foreshortened proximal limb bones in fetuin-A knockout mice.
Seto J, Busse B, Gupta HS, Schäfer C, Krauss S, Dunlop JWC, Masic A, Kerschnitzki M et al.
Plos One vol. 7 (10)
01-01-2012 - Acoustic and Large Eddy Simulation studies of azimuthal modes in annular combustion chambers
Wolf P, Staffelbach G, Gicquel LYM, Müller J-D, Poinsot T
Combustion and Flame
01-01-2012 - ADVANCED HEAT ANALYSIS OF TURBINE ROTOR BLADES COUPLED WITH COMBUSTION CHAMBER SIMULATION
Gomzikov LY, Karabasov SA, Latyshev VG
Tsagi Science Journal, Begell House vol. 43 (5), 647-666.
01-01-2012 - Advances in Haptics, Tactile Sensing, and Manipulation for Robot‐Assisted Minimally Invasive Surgery, Noninvasive Surgery, and Diagnosis
Hamed A, Tang SC, Ren H, Squires A, Payne C, Masamune K, Tang G, Mohammadpour J et al.
Journal of Robotics, Hindawi vol. 2012 (1), 1-14.
01-01-2012 - Altered vascular function, arterial stiffness, and antioxidant gene responses in pediatric thalassemia patients
Detchaporn P, Kukongviriyapan U, Prawan A, Jetsrisuparb A
Pediatric Cardiology, Springer Link vol. 33 (7), 1054-1060.
01-01-2012 - An Experimental Model to Simulate Arterial Pulsatile Flow: In Vitro Pressure and Pressure Gradient Wave Study
Experimental Mechanics, 1-12.
01-01-2012 - Analysis of femtosecond laser surface patterning on bulk single-crystalline diamond
Lee GCB, Su S, Li J, Sugden K, Roohpour N, Yan H, Ye H
Journal of Experimental Nanoscience vol. 7 (6), 662-672.
01-01-2012 - Analytical formulation of meshless local integral equation method
Wen PH, Aliabadi MH
Applied Mathematical Modelling
01-01-2012 - BaSnO3 Thick Film as a Carbon Dioxide Sensor
Journal of The Electrochemical Society vol. 159 (3), J67-J71.
01-01-2012 - Bioactivity And Bone Formation In Silicon-Substituted Hydroxyapatite
Ozad U, Parish A, Hing KA
Sakarya University Journal of Science, Lookus Bilisim vol. 16 (3), 170-177.
01-01-2012 - Capillary interactions between anisotropic particles
Botto L, Lewandowski EP, Cavallaro M, Stebe KJ
Soft Matter vol. 8
01-01-2012 - Characterization of defects in Mg doped GaN epitaxial layers using conductance measurements
Elsherif OS, Vernon-Parry KD, Dharmadasa IM, Evans-Freeman JH, Airey RJ, Kappers MJ, Humphreys CJ
Thin Solid Films, Elsevier vol. 520 (7), 3064-3070.
01-01-2012 - Characterization of multi-jet electrospray systems
Ryan CN, Smith KL, Stark JPW
Journal of Aerosol Science vol. 51, 35-48.
01-01-2012 - Characterization of rigid polyurethane foams containing microencapsulted phase change materials: Microcapsules type effect
Journal of Applied Polymer Science
01-01-2012 - Characterization of thin films and membranes
Vadgama P, Mandler D
Analytical and Bioanalytical Chemistry, 1-2.
01-01-2012 - Chemosensors and biosensors based on polyelectrolyte microcapsules containing fluorescent dyes and enzymes
Kazakova LI, Shabarchina LI, Anastasova S, Pavlov AM, Vadgama P, Skirtach AG, Sukhorukov GB
Analytical and Bioanalytical Chemistry, 1-10.
01-01-2012 - Chemosensors and biosensors based on polyelectrolyte microcapsules containing fluorescent dyes and enzymes
Kazakova LI, Shabarchina LI, Anastasova S, Pavlov AM, Vadgama P, Skirtach AG, Sukhorukov GB
Analytical and Bioanalytical Chemistry, 1-10.
01-01-2012 - Circadian Disruption and Remedial Interventions Effects and Interventions for Jet Lag for Athletic Peak Performance
Forbes-Robertson S, Dudley E, Vadgama P, Cook C, Drawer S, Kilduff L
Sports Medicine vol. 42 (3), 185-208.
01-01-2012 - Combustion characteristics of H2/N2 and H2/CO syngas nonpremixed flames
Dinesh KKJR, Jiang X, Kirkpatrick MP
International Journal of Hydrogen Energy vol. 37 (21), 16186-16200.
01-01-2012 - Comments on “On the Existence of Stable, Causal Multipliers for Systems With Slope-Restricted Nonlinearities”
Carrasco J, Heath WP, Li G, Lanzon A
Automatic Control, IEEE Transactions On, IEEE vol. 57 (9), 2422-2428.
01-01-2012 - Computational fluid dynamics (CFD) investigation of air flow and temperature distribution in a small scale bread-baking oven
Khatir Z, Thompson H, Kapur N, Lawes M
Applied Energy vol. 89 (1), 89-96.
01-01-2012 - Contractile hydrostatically coupled dielectric elastomer actuators
IEEE/Asme Transactions On Mechatronics vol. 17 (5), 987-994.
01-01-2012 - Control of starch granule numbers in Arabidopsis chloroplasts
Crumpton-Taylor M, Grandison S, Png KMY, Bushby AJ, Smith AM
Plant Physiology vol. 158 (2), 905-916.
01-01-2012 - Correlative Light and Volume Electron Microscopy: Using Focused Ion Beam Scanning Electron Microscopy to Image Transient Events in Model Organisms
Bushby AJ, Mariggi G, Armer HEJ, Collinson LM
vol. 111, 357-382.
01-01-2012 - Crack growth by dimensional reduction methods
Wen PH, Aliabadi MH
Key Engineering Materials vol. 525-526, 17-20.
01-01-2012 - Deformation of uncemented metal acetabular cups following impaction: Experimental and finite element study
Hothi HS, Busfield JJC, Shelton JC
Computer Methods in Biomechanics and Biomedical Engineering
01-01-2012 - Deformation of uncemented metal acetabular cups following impaction: Experimental and finite element study
Hothi HS, Busfield JJC, Shelton JC
Computer Methods in Biomechanics and Biomedical Engineering
01-01-2012 - Dense zircon (ZrSiO 4) ceramics by high energy ball milling and spark plasma sintering
Rendtorff NM, Grasso S, Hu C, Suarez G, Aglietti EF, Sakka Y
Ceramics International vol. 38 (3), 1793-1799.
01-01-2012 - Design and fabrication of a 3D nanopatterned PEEK implant for cortical bone regeneration in a rabbit model
Brydone AS, Morrison DSS, Stormonth-Darling J, Meek RDM, Tanner KE, Gadegaard N
European Cells and Materials vol. 24 (SUPPL. 1)
01-01-2012 - Design of biomolecules for nanoengineered biomaterials for regenerative medicine
Mata A, Palmer L, Tejeda-Montes E, Stupp SI
Methods in Molecular Biology vol. 811, 39-49.
01-01-2012 - Design of high-efficiency turbomachinery blades for energy conversion devices with the three-dimensional prescribed surface curvature distribution blade design (CIRCLE) method
Korakianitis T, Hamakhan IA, Rezaienia MA, Wheeler APS, Avital EJ, Williams JJR
Applied Energy vol. 89 (1), 215-227.
01-01-2012 - Design of high-efficiency turbomachinery blades for energy conversion devices with the three-dimensional prescribed surface curvature distribution blade design (CIRCLE) method
Korakianitis T, Hamakhan IA, Rezaienia MA, Wheeler APS, Avital EJ, Williams JJR
Applied Energy vol. 89 (1), 215-227.
01-01-2012 - Design of high-efficiency turbomachinery blades for energy conversion devices with the three-dimensional prescribed surface curvature distribution blade design (CIRCLE) method
Korakianitis T, Hamakhan IA, Rezaienia MA, Wheeler APS, Avital EJ, Williams JJR
Applied Energy vol. 89 (1), 215-227.
01-01-2012 - Detached Eddy Simulation of Free-Surface Flow Around a Submerged Submarine Fairwater
Ikram Z, Avital EJ, Williams JJR
Journal of Fluids Engineering-Transactions of The Asme vol. 134 (6)
01-01-2012 - Detached Eddy Simulation of Free-Surface Flow Around a Submerged Submarine Fairwater
Ikram Z, Avital EJ, Williams JJR
Journal of Fluids Engineering-Transactions of The Asme vol. 134 (6)
01-01-2012 - Determination of the elastic moduli of thin samples and adherent cells using conical atomic force microscope tips
Gavara N, Chadwick RS
Nature Nanotechnology vol. 7 (11), 733-736.
01-01-2012 - Direct fabrication and morphology of metallic micropatterns by pulsed jet nanoelectrospraying of silver nano-ink
Wang K, Stark JPW
Journal of Coatings Technology and Research vol. 9 (3), 317-322.
01-01-2012 - Distributed formation control of unicycle robots
Sadowska A, Kostic D, Van De Wouw N, Huijberts H, Nijmeijer H
Proceedings IEEE International Conference On Robotics and Automation, 1564-1569.
01-01-2012 - Duplex Hardening of Steels for Aeroengine Bearings
Ooi S
Isij International, Iron and Steel Institute of Japan vol. 52 (11)
01-01-2012 - Dynamic crack problems using meshless method
Wen PH, Aliabadi MH
Key Engineering Materials vol. 525-526, 601-604.
01-01-2012 - EDITORIAL
Materials Science and Technology, Sage Publications vol. 28 (1), 1-2.
01-01-2012
