Dr Andrew Spowage
PhD, PGCHE, CEng, CSci, FIMMM, FIMM, FHEA

All Publications

2021

• Brewitt NP, Spowage AC and Mustapha KB (2021). "Failure investigation of a fractured vent line." Engineering Failure Analysis  vol. 124,
  DOI

  10.1016/j.engfailanal.2021.105331

  Abstract
  
  01-06-2021

2019

• Nigel B, Andrew S, Ian C and Neil C (2019). "Failure of copper wires in a railway Motor Operation Contact." Elsevier  Engineering Failure Analysis  vol. 108, 104214-104214.
  DOI

  10.1016/j.engfailanal.2019.104214
  
  23-10-2019

2015

• Kiang CT, Spowage A and Yoong CK (2015). "Review of Control and Sensor System of Flexible Manipulator." Journal of Intelligent and Robotic Systems: Theory and Applications  vol. 77, (1) 187-213.
  DOI

  10.1007/s10846-014-0071-4
  
  01-01-2015

2013

• Spowage A (2013). "Forensic corrosion engineering." Corrosion and Materials  vol. 38, (6) 35-39.
  
  01-12-2013
• Kanagaratnam S, Enamul Hoque M, Mat Sahri M and Spowage A (2013). "Investigating the effect of deforming temperature on the oil-binding capacity of palm oil based shortening." Journal of Food Engineering  vol. 118, (1) 90-99.
  DOI

  10.1016/j.jfoodeng.2013.03.021
  
  01-09-2013

2011

• Chin CMM, Spowage AC, Yap EH and Lee CW (2011). "Developing a project management methodology for use in doctoral research projects." Journal of Institutional Research South East Asia  vol. 9, (1) 5-26.
  
  01-05-2011
• Spowage AC and Bray S (2011). "Characterization of nanoprecipitation mechanisms during isochronal aging of a pseudo-binary Al-8.7 at. pct Li alloy." Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science  vol. 42, (1) 227-230.
  DOI

  10.1007/s11661-010-0498-6
  
  01-01-2011
• May CCM, Hwa YE and Spowage A (2011). "Developing and evaluating a project management methodology (PMM) for university-industry collaborative projects." Product Management & Development  vol. 9, (2) 121-135.
  DOI

  10.4322/pmd.2012.004
  
  01-01-2011

2006

• Spowage AC, Shacklock AP, Malcolm AA, May SL, Tong L and Kennedy AR (2006). "Development of characterisation methodologies for macroporous materials." Journal of Porous Materials  vol. 13, (3) 431-438.
  DOI

  10.1007/s10934-006-8042-1
  
  01-08-2006

2005

• Yin L, Pickering JP, Ramesh K, Huang H, Spowage AC and Vancoille EYJ (2005). "Planar nanogrinding of a fine grained WC-Co composite for an optical surface finish." International Journal of Advanced Manufacturing Technology  vol. 26, (7-8) 766-773.
  DOI

  10.1007/s00170-004-2056-0
  
  01-10-2005

2004

• Arunachalam RM, Mannan MA and Spowage AC (2004). "Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools." International Journal of Machine Tools and Manufacture  vol. 44, (14) 1481-1491.
  DOI

  10.1016/j.ijmachtools.2004.05.005
  
  01-11-2004
• Arunachalam RM, Mannan MA and Spowage AC (2004). "Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools." International Journal of Machine Tools and Manufacture  vol. 44, (9) 879-887.
  DOI

  10.1016/j.ijmachtools.2004.02.016
  
  01-07-2004
• Mai TA and Spowage AC (2004). "Characterisation of dissimilar joints in laser welding of steel-kovar, copper-steel and copper-aluminium." Materials Science and Engineering A  vol. 374, (1-2) 224-233.
  DOI

  10.1016/j.msea.2004.02.025
  
  15-06-2004
• Yin L, Spowage AC, Ramesh K, Huang H, Pickering JP and Vancoille EYJ (2004). "Influence of microstructure on ultraprecision grinding of cemented carbides." International Journal of Machine Tools and Manufacture  vol. 44, (5) 533-543.
  DOI

  10.1016/j.ijmachtools.2003.10.022
  
  01-04-2004