Dr Adrian Briggs
BSc (Eng) PhD (Lond)

 
 
 
View / download this list as an Acrobat PDF Document view / download as a PDF document

All Publications

    2018

    • Zeinelabdeen MIM, Kamran MS and Briggs A (2018). "Comparison of empirical models with an experimental database for condensation on banks of tubes." International Journal of Heat and Mass Transfer  vol. 122, 765-774.
      01-07-2018

    2015

    2014

    2013

    2012

    • Ali HM and Briggs A (2012). "Condensation of ethylene glycol on pin-fin tubes: Effect of circumferential pin spacing and thickness." Applied Thermal Engineering  vol. 49, 9-13.
      31-12-2012
    • Ali HM and Briggs A (2012). "Condensation of R-113 on pin-fin tubes: Effect of circumferential pin thickness and spacing." Heat Transfer Engineering  vol. 33, (3) 205-212.
      01-02-2012
    • Fitzgerald CL, Briggs A, Rose JW and Wang HS (2012). "Effect of vapour velocity on condensate retention between fins during condensation on low-finned tubes." International Journal of Heat and Mass Transfer  vol. 55, (4) 1412-1418.
      31-01-2012
    • Ali HM and Briggs A (2012). "Enhanced condensation of ethylene glycol on single pin-fin tubes: Effect of pin geometry." Journal of Heat Transfer  vol. 134, (1)
      01-01-2012

    2010

    • Fitzgerald CL, Briggs A, Wang H and Rose JW (2010). "Effect of vapour velocity on condensation of ethylene glycol on horizontal integral fin tubes: Heat transfer and retention angle measurements." 2010 14th International Heat Transfer Conference, Ihtc 14  vol. 2, 89-96.
      01-12-2010

    2007

    • Namasivayam S and Briggs A (2007). "Effect of vapor velocity on condensation of low-pressure steam on integral-fin tubes." Journal of Heat Transfer  vol. 129, (11) 1486-1493.
      01-11-2007

    2005

    • Murase T, Briggs A, Wang HS and Rose JW (2005). "Condensation on a horizontal wire-wrapped tube." Journal of Heat Transfer  vol. 127, (11) 1207-1213.
      01-11-2005
    • Briggs A and Bui HH (2005). "Condensation of vapour on sub-cooled liquid columns - Application to the thermal design of shell-and-tube condensers." International Journal of Energy Research  vol. 29, (10) 913-921.
      01-08-2005
    • Briggs A and Sabaratnam S (2005). "Condensation from pure steam and steam-air mixtures on integral-fin tubes in a bank." J Heat Trans-T Asme  vol. 127, (6) 571-580.
      01-06-2005

    2004

    • Ma X, Briggs A and Rose JW (2004). "Heat transfer and pressure drop characteristics for condensation of R113 in a vertical micro-finned tube with wire insert." International Communications in Heat and Mass Transfer  vol. 31, (5) 619-627.
      01-07-2004
    • Namasivayam S and Briggs A (2004). "Forced-convection condensation of ethylene glycol on integral-fin tubes." American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd  vol. 375, (2) 613-619.
      01-01-2004

    2003

    • Briggs A and Sabaratnam S (2003). "Condensation of steam on integral-fin tubes in a bank." Proceedings of The Asme Summer Heat Transfer Conference  vol. 2003, 639-647.

      01-12-2003
    • Briggs A, Wang HS, Murase T and Rose JW (2003). "Heat Transfer Measurements for Condensation of Steam on a Horizontal Wire-Wrapped Tube." Journal of Enhanced Heat Transfer  vol. 10, (4) 355-362.
      01-10-2003
    • Briggs A (2003). "Enhanced condensation of r-113 and steam using three-dimensional pin-fin tubes." Experimental Heat Transfer  vol. 16, (1) 61-79.
      01-01-2003

    2000

    • Briggs A, Kelemenis C and Rose JW (2000). "Heat transfer and pressure drop measurements for in-tube condensation of cfc-113 using microfin tubes and wire inserts." Experimental Heat Transfer  vol. 13, (3) 163-181.
      01-01-2000

    1999

    • Briggs A, Kelemenis C and Rose JW (1999). "Heat transfer and pressure drop during in-tube condensation from CFC-113/air mixtures using a wire insert." Heat and Technology  vol. 17, (2) 57-61.

      01-12-1999
    • Briggs A and Rose JW (1999). "An evaluation of models for condensation heat transfer on low-finned tubes." Journal of Enhanced Heat Transfer  vol. 6, (1) 51-60.
      01-01-1999

    1995

    • BRIGGS A and ROSE JW (1995). "CONDENSATION PERFORMANCE OF SOME COMMERCIAL INTEGRAL FIN TUBES WITH STEAM AND CFC113." Exp Heat Transfer  vol. 8, (2) 131-143.
      01-04-1995
    • Abdullah R, Cooper JR, Briggs A and Rose JW (1995). "Condensation of steam and R113 on a bank of horizontal tubes in the presence of a noncondensing gas." Experimental Thermal and Fluid Science  vol. 10, (3) 298-306.
      01-01-1995

    1994

    • Wen XL, Briggs A and Rose JW (1994). "Enhancement of condensation heat transfer on integral-fin tubes using radiused fin-root fillets." Journal of Enhanced Heat Transfer  vol. 1, (2) 211-217.
      01-01-1994
    • Briggs A and Rose JW (1994). "Effect of fin efficiency on a model for condensation heat transfer on a horizontal, integral-fin tube." International Journal of Heat and Mass Transfer  vol. 37, (SUPPL. 1) 457-463.
      01-01-1994

    1992

    • BRIGGS A, WEN XL and ROSE JW (1992). "ACCURATE HEAT-TRANSFER MEASUREMENTS FOR CONDENSATION ON HORIZONTAL, INTEGRAL-FIN TUBES." J Heat Trans-T Asme  vol. 114, (3) 719-726.
      01-08-1992