Prof James Busfield
FREng, MA, PhD, CEng, FIMMM, FHEA
All Publications
Page 3 of 4
2011
- Lowe DJ, Chapman AV, Cook S and Busfield JJC (2011). Micromechanical models of young's modulus of NR/organoclay nanocomposites. Journal of Polymer Science, Part B: Polymer Physics vol. 49 (22), 1621-1627.
15-11-2011 - Suphadon N and Busfield JJC (2011). The dynamic properties of fumed silica filled SBR as function of pre-strain. Polymer Testing vol. 30 (7), 779-783.
01-10-2011 - Lowe DJ, Chapman AV, Cook S and Busfield JJC (2011). Natural rubber nanocomposites by in situ modification of clay. Macromolecular Materials and Engineering vol. 296 (8), 693-702.
15-08-2011 - Tunnicliffe LB, Thomas AG and Busfield JJC (2011). Light scattering and transmission studies of nanofiller particulate size, matrix cavitation, and high strain interfacial dewetting behavior in silica-elastomer composites. Journal of Polymer Science, Part B: Polymer Physics vol. 49 (15), 1084-1092.
01-08-2011 - Kong SM, Mariatti M and Busfield JJC (2011). Effects of types of fillers and filler loading on the properties of silicone rubber composites. Journal of Reinforced Plastics and Composites vol. 30 (13), 1087-1096.
01-07-2011 - Asare S and Busfield JJC (2011). Fatigue life prediction of bonded rubber components at elevated temperature. Plastics, Rubber and Composites vol. 40 (4), 194-200.
01-05-2011 - Busfield JJC (2011). Modelling of elastomeric materials and products. Plastics, Rubber and Composites vol. 40 (4), 151-153.
01-05-2011 - Sakulkaew K, Thomas AG and Busfield JJC (2011). The effect of the rate of strain on tearing in rubber. Polymer Testing vol. 30 (2), 163-172.
01-04-2011 - Hothi HS, Busfield JJC and Shelton JC (2011). Explicit finite element modelling of the impaction of metal press-fit acetabular components. Proceedings of The Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine vol. 225 (3), 303-314.
01-03-2011 - Sakulkaew K, Thomas AG and Busfield JJC (2011). A new approach to characterize the onset tearing in rubber. In Constitutive Models For Rubber Vii 185-189.
01-01-2011 - Tunnicliffe LB, Thomas AG and Busfield JJC (2011). Energy losses at small strains in filled rubbers. In Constitutive Models For Rubber Vii 63-67.
01-01-2011 - Baumard TLM, Thomas AG, Ding W and Busfield JJC (2011). Fatigue peeling of rubber. In Constitutive Models For Rubber Vii 293-297.
01-01-2011
2010
- Shorter R, Smith JD, Coveney VA and Busfield JJC (2010). Axial compression of hollow elastic spheres. Journal of Mechanics of Materials and Structures vol. 5 (5), 693-705.
22-12-2010 - Gabriel P, Fukahori Y, Thomas AG and Busfield JJC (2010). Fea modeling of schallamach waves. Rubber Chemistry and Technology vol. 83 (4), 358-367.
01-12-2010 - Fukahori Y, Gabriel P and Busfield JJC (2010). How does rubber truly slide between Schallamach waves and stick-slip motion? Wear vol. 269 (11-12), 854-866.
28-10-2010 - Suphadon N, Thomas AG and Busfield JJC (2010). The viscoelastic behavior of rubber under a complex loading. II. The effect large strains and the incorporation of carbon black. Journal of Applied Polymer Science vol. 117 (3), 1290-1297.
01-08-2010 - Suphadon N, Thomas AG and Busfield JJC (2010). The viscoelastic behaviour of rubber under a small simple shear oscillation superimposed on a large pure shear. Polymer Testing vol. 29 (4), 440-444.
01-06-2010 - Jha V, Thomas AG, Bennett M and Busfield JJC (2010). Reversible electrical behavior with strain for a carbon black-filled rubber. Journal of Applied Polymer Science vol. 116 (1), 541-546.
05-04-2010 - Busfield J and Adams J (2010). Getting smarter. Materials World vol. 18 (4), 19-21.
01-04-2010 - Ciselli P, Lu L, Busfield JJC and Peijs T (2010). Piezoresistive polymer composites based on EPDM and MWNTs for strain sensing applications. E-Polymers
17-02-2010 - Gabriel P, Thomas AG and Busfield JJC (2010). Influence of interface geometry on rubber friction. Wear vol. 268 (5-6), 747-750.
11-02-2010 - Liang H, Fukahori Y, Thomas AG and Busfield JJC (2010). The steady state abrasion of rubber: Why are the weakest rubber compounds so good in abrasion? Wear vol. 268 (5-6), 756-762.
11-02-2010
2009
- Busfield J and Burke M (2009). Editorial: Rubber in engineering. Plastics, Rubber and Composites vol. 38 (8)
01-10-2009 - Suphadon N and Busfield JJC (2009). Elastic behaviour of rubber cylinders under combined torsion and tension loading. Plastics, Rubber and Composites vol. 38 (8), 337-342.
01-10-2009 - (2009). Hyperelasticity with volumetric damage. In Constitutive Models For Rubber Vi, Taylor & Francis 295-300.
01-09-2009 - Busfield J (2009). Modelling friction and abrasion in rubber. In Constitutive Models For Rubber Vi, Taylor & Francis 289-293.
01-09-2009 - Busfield J, Thomas A, Gabriel P and Fukahori Y (2009). The mechanics of sliding friction between a rigid indenter and a rubber surface. In Constitutive Models For Rubber Vi, Taylor & Francis 305-309.
01-09-2009 - Suphadon N, Busfield J and Thomas A (2009). The visco-elastic behaviour of elastomers at large pre-strains. In Constitutive Models For Rubber Vi, Taylor & Francis 153-157.
01-09-2009 - Suphadon N, Thomas AG and Busfield JJC (2009). Viscoelastic behavior of rubber under a complex loading. Journal of Applied Polymer Science vol. 113 (2), 693-699.
15-07-2009 - Liang H, Fukahori Y, Thomas AG and Busfield JJC (2009). Rubber abrasion at steady state. Wear vol. 266 (1-2), 288-296.
05-01-2009 - Asare S, Thomas AG and Busfield JJC (2009). Cyclic stress relaxation (CSR) of filled rubber and rubber components. Rubber Chemistry and Technology vol. 82 (1), 104-112.
01-01-2009
2008
- Ciselli P, Lu L, Busfield JJC and Peijs T (2008). Multifunctional elastomer nanocomposites based on EPDM and carbon nanotubes. Materials Research Society Symposium Proceedings vol. 1137, 61-72.
01-12-2008 - Papadopoulos IC, Thomas AG and Busfield JJC (2008). Rate transitions in the fatigue crack growth of elastomers. Journal of Applied Polymer Science vol. 109 (3), 1900-1910.
05-08-2008 - Fukahori Y, Liang H and Busfield JJC (2008). Criteria for crack initiation during rubber abrasion. Wear vol. 265 (3-4), 387-395.
31-07-2008 - Jha V, Hon AA, Thomas AG and Busfield JJC (2008). Modeling of the effect of rigid fillers on the stiffness of rubbers. Journal of Applied Polymer Science vol. 107 (4), 2572-2577.
15-02-2008 - Ciselli P, Lu L, Busfield JJC and Peijs T (2008). Multifunctional elastomer nanocomposites based on EPDM and carbon nanotubes. Materials Research Society Symposium Proceedings vol. 1143, 31-42.
01-01-2008 - Ciselli P, Lu L, Busfield JJ and Peijs T (2008). Multifunctional Elastomer Nanocomposites based on EPDM and Carbon Nanotubes. Mrs Advances, Springer Nature vol. 1143
01-01-2008
2007
- Kumar P, Fukahori Y, Thomas AG and Busfield JJC (2007). Volume changes under strain resulting from the incorporation of rubber granulates into a rubber matrix. Journal of Polymer Science, Part B: Polymer Physics vol. 45 (23), 3169-3180.
01-12-2007 - Kumar P, Fukahori Y, Thomas AG and Busfield JJC (2007). Recycled rubber: The rubber granulate - Virgin rubber interface. Rubber Chemistry and Technology vol. 80 (1), 24-39.
01-01-2007
2006
- Baxter S, Busfield JJC and Peijs T (2006). Selection of elastomers for a synthetic heart valve.
30-10-2006 - Busfield JJC and Ng WH (2006). Using FEA techniques to predict fatigue failure in elastomers.
30-10-2006 - Abraham F, Albihn P, Alshuth T, Azura AR, Busfield J, Campion R, Clotet M, Cook P, Coveney V, Daley J, Jerrams S, Johnson D, Lokander M, Mars W, Morgan G, Muhr A, Rizk R, Stenberg B, Thomas A, Wu W and Yeoh OH (2006). Appendix: Contact Details for Authors. In Elastomers and Components, Elsevier 227-230.
01-01-2006 - Baxter S, Busfield JJC and Peijs T (2006). Chapter 12 Selection of Elastomers for a Synthetic Heart Valve. In Elastomers and Components, Elsevier 171-177.
01-01-2006 - Busfield JJC and Ng WH (2006). Chapter 13 Using FEA Techniques to Predict Fatigue Failure in Elastomers. In Elastomers and Components, Elsevier 179-193.
01-01-2006 - Boast D, Busfield JJC, Coveney VA, Hepburn C, Muhr AH and Whear R (2006). The Rubber in Engineering Series IOM3. In Elastomers and Components, Elsevier
01-01-2006
2005
- Busfield JJC, Jha V, Liang H, Papadopoulos IC and Thomas AG (2005). Prediction of fatigue crack growth using finite element analysis techniques applied to three-dimensional elastomeric components. Plastics, Rubber and Composites vol. 34 (8), 349-356.
15-12-2005 - Busfield JJC, Jha V, Hon AA and Thomas AG (2005). Investigation of interfacial slippage on filler reinforcement in carbon-black filled elastomers. Constitutive Models For Rubber Iv - Proceedings of The 4th European Conference For Constitutive Models For Rubber, Eccmr 2005, 459-464.
01-12-2005 - Busfield JJC, Liang H, Fukahori Y and Thomas AG (2005). Modelling the abrasion process in elastomer materials. Constitutive Models For Rubber Iv - Proceedings of The 4th European Conference For Constitutive Models For Rubber, Eccmr 2005, 139-143.
01-12-2005 - Busfield JJC, Papadopoulos IC and Thomas AG (2005). Transitions in tear and fatigue crack growth in elastomers. Constitutive Models For Rubber Iv - Proceedings of The 4th European Conference For Constitutive Models For Rubber, Eccmr 2005, 145-151.
01-12-2005 - Busfield JJC, Thomas AG and Yamaguchi K (2005). Electrical and mechanical behavior of filled rubber. III. Dynamic loading and the rate of recovery. Journal of Polymer Science, Part B: Polymer Physics vol. 43 (13), 1649-1661.
01-07-2005