Division of Mechanical Engineering, Robotics and Design


   2020   |   2019   |   2018   |   2017   |   2016   |   2015   |   2014   |   2013   |   2012   |   2011   |   2010   
  • Na J, Huang Y, Pei Q, Wu X, Gao G and Li G (2019). "Active Suspension Control of Full-car Systems without Function Approximation." Institute of Electrical and Electronics Engineers  Ieee-Asme Transactions On Mechatronics 
  • Chen L, Ghilardi M, Busfield JJC and Carpi F (2019). "Electrically tuning soft membranes to both a higher and a lower transparency." Nature Publishing Group  Scientific Reports  vol. 9, (1)
  • Fukahori Y, Gabriel P, Liang H and Busfield JJC (2019). "A new generalized philosophy and theory for rubber friction and wear." Elsevier  Wear  203166-203166.
  • Xu S, Mueller J-D, Pavanakumar M and Wang D (2019). "A Newton–Krylov Solver for Robust Turbomachinery Aerodynamic Analysis." American Institute of Aeronautics and Astronautics  Aiaa Journal: Devoted to Aerospace Research and Development 
  • Zhang Y, Guo C, Li G, Liu Y and Chen Z (2019). "Cooperative control strategy for plug-in hybrid electric vehicles based on a hierarchical framework with fast calculation." Elsevier  Journal of Cleaner Production  vol. 251,
  • Busfield J, Hohenberger T, Pugno N and WINDSLOW R (2019). "Constitutive Model for both Low and High Strain Non-Linearities in Highly Filled Elastomers and Implementation with user-defined Material Subroutines in Abaqus." American Chemical Society  Rubber Chemistry and Technology  vol. 92, (4) 653-686.
  • Meng N, Ren X, Santagiuliana G, Ventura L, Zhang H, Wu J, Yan H, Reece MJ and Bilotti E (2019). "Ultrahigh β-phase content poly(vinylidene fluoride) with relaxor-like ferroelectricity for high energy density capacitors." Nature Communications  vol. 10, (1)
  • Daub M and Duddeck F (2019). "Maximizing Flexibility for Complex Systems Design to Compensate Lack-of-Knowledge Uncertainty." Asce-Asme Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering  vol. 5, (4)
  • Ziefuss M, Karimi N, Ries F, Sadiki A and Mehdizadeh A (2019). "Entropy generation assessment for wall-bounded turbulent shear flows based on reynolds analogy assumptions." Entropy  vol. 21, (12)
  • Dargaville S, Buchan AG, Smedley-Stevenson RP, Smith PN and Pain CC (2019). "Scalable angular adaptivity for Boltzmann transport." Elsevier Bv  Journal of Computational Physics  109124-109124.
  • Christodoulou L, Karimi N, Cammarano A, Paul M and Navarro-Martinez S (2019). "State prediction of an entropy wave advecting through a turbulent channel flow." Cambridge University Press (Cup)  Journal of Fluid Mechanics  vol. 882,
  • Ghilardi M, Boys H, Török P, Busfield JJC and Carpi F (2019). "Smart Lenses with Electrically Tuneable Astigmatism." Nature Publishing Group  Scientific Reports  vol. 9, (1) 16127-16127.
  • Mueller J, ZHANG X, Akbarzadeh S and WANG Y (2019). "Geometric continuity constraints of automatically derived parametrisations in CAD-based shape optimisation." Taylor & Francis  International Journal of Computational Fluid Dynamics 
  • Alonso-Rasgado M, Bailey C, Leonardo-Diaz R, Jimenez-Cruz D and Talwalkar S (2019). "Performance evaluation of surgical techniques for treatment of scapholunate instability in a type II wrist." Wiley  International Journal For Numerical Methods in Biomedical Engineering 
  • Labonte D, Struecker MY, Birn-Jeffery AV and Federle W (2019). "Shear-sensitive adhesion enables size-independent adhesive performance in stick insects." Proceedings of The Royal Society B: Biological Sciences  vol. 286, (1913)
  • Zhang Q, Wang YC, Bailey CG, Istrate OM, Li Z, Kinloch IA and Budd PM (2019). "Quantification of gas permeability of epoxy resin composites with graphene nanoplatelets." Elsevier  Composites Science and Technology  vol. 184,
  • Alizadeh R, Karimi N, Mehdizadeh A and Nourbakhsh A (2019). "Analysis of transport from cylindrical surfaces subject to catalytic reactions and non-uniform impinging flows in porous media: A non-equilibrium thermodynamics approach." Journal of Thermal Analysis and Calorimetry  vol. 138, (1) 659-678.
  • Mousavi SM, Kamali R, Sotoudeh F, Pourabidi R, Karimi N and Jeung IS (2019). "A comprehensive investigation of acoustic power level in a moderate or intense low oxygen dilution in a jet-in-hot-coflow under various working conditions." Aerospace Science and Technology  vol. 93,
  • Lange VA, Fender J, Song L and Duddeck F (2019). "Early phase modeling of frontal impacts for crashworthiness: From lumped mass–spring models to Deformation Space Models." Proceedings of The Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering  vol. 233, (12) 3000-3015.
  • Zhang Y, Zeng T and Li G (2019). "Robust Excitation Force Estimation and Prediction for Wave Energy Converter M4 Based on Adaptive Sliding-Mode Observer." Institute of Electrical and Electronics Engineers (Ieee)  Ieee Transactions On Industrial Informatics  1-1.
  • Wan K, Taroni PJ, Liu Z, Liu Y, Tu Y, Santagiuliana G, Hsia I, Zhang H, Fenwick O, Krause S, Baxendale M, Schroeder BC and Bilotti E (2019). "Flexible and Stretchable Self‐Powered Multi‐Sensors Based on the N‐Type Thermoelectric Response of Polyurethane/Na x (Ni‐ett) n Composites." Wiley  Advanced Electronic Materials  1900582-1900582.
  • Chen Y, Alanezi AA, Zhou J, Altaee A and Shaheed MH (2019). "Optimization of module pressure retarded osmosis membrane for maximum energy extraction." Journal of Water Process Engineering  vol. 32,
  • Liu Y, Zhao P, Qin D, Li G, Chen Z and Zhang Y (2019). "Driving Intention Identification Based on Long Short-Term Memory and A Case Study in Shifting Strategy Optimization." Institute of Electrical and Electronics Engineers (Ieee)  Ieee Access  vol. 7, 128593-128605.
  • Tan W, Stallard JC, Smail FR, Boies AM and Fleck NA (2019). "The mechanical and electrical properties of direct-spun carbon nanotube mat-epoxy composites." Carbon  vol. 150, 489-504.
  • Saeed A, Karimi N, Hunt G and Torabi M (2019). "On the influences of surface heat release and thermal radiation upon transport in catalytic porous microreactors—A novel porous-solid interface model." Chemical Engineering and Processing - Process Intensification  vol. 143,
  • Zhang K and Jiang X (2019). "Uncertainty quantification of fuel variability effects on high hydrogen content syngas combustion." Elsevier Bv  Fuel  vol. 257, 116111-116111.
  • Zeng T, Ren X, Zhang Y, Li G and Na J (2019). "An Integrated Optimal Design for Guaranteed Cost Control of Motor Driving System with Uncertainty." Institute of Electrical and Electronics Engineers (Ieee)  Ieee/Asme Transactions On Mechatronics  1-1.
  • Kodakkal A, Saha SK, Sepahvand K, Matsagar VA, Duddeck F and Marburg S (2019). "Uncertainties in dynamic response of buildings with non-linear base-isolators." Elsevier  Engineering Structures  vol. 197,
  • Fattahi A, Hosseinalipour SM, Karimi N, Saboohi Z and Ommi F (2019). "On the response of a lean-premixed hydrogen combustor to acoustic and dissipative-dispersive entropy waves." Energy  vol. 180, 272-291.
  • Dargaville S, Buchan AG, Smedley-Stevenson RP, Smith PN and Pain CC (2019). "Angular adaptivity with spherical harmonics for Boltzmann transport." Elsevier Bv  Journal of Computational Physics  vol. 397, 108846-108846.
  • Akar S, Rashidi S, Esfahani JA and Karimi N (2019). "Targeting a channel coating by using magnetic field and magnetic nanofluids." Journal of Thermal Analysis and Calorimetry  vol. 137, (2) 381-388.
  • Guthrie DGP, Torabi M and Karimi N (2019). "Energetic and entropic analyses of double-diffusive, forced convection heat and mass transfer in microreactors assisted with nanofluid." Journal of Thermal Analysis and Calorimetry  vol. 137, (2) 637-658.
  • Hua N, Xi H, Xu RJ, Chen Y and Wang HS (2019). "Numerical simulation of multi-pass parallel flow condensers with liquid-vapor separation." International Journal of Heat and Mass Transfer  vol. 142,
  • Li G and Jiang X (2019). "Effects of electrical parameters on the performance of a plasma swirler." Iop Publishing  Physica Scripta  vol. 94, (9) 095601-095601.
  • Liu H, Falzon BG, Li S, Tan W, Liu J, Chai H, Blackman BRK and Dear JP (2019). "Compressive failure of woven fabric reinforced thermoplastic composites with an open-hole: An experimental and numerical study." Composite Structures  vol. 213, 108-117.
  • Neal BS, Barton CJ, Birn-Jeffery A and Morrissey D (2019). "Increased hip adduction during running is associated with patellofemoral pain and differs between males and females: A case-control study." Journal of Biomechanics  vol. 91, 133-139.
  • Zhan S, Li G and Bailey C (2019). "Economic feedback model predictive control of wave energy converters." Institute of Electrical and Electronics Engineers (Ieee)  Ieee Transactions On Industrial Electronics  1-1.
  • Liao Z, Gai N, Stansby P and Li G (2019). "Linear non-causal optimal control of an attenuator type wave energy converter M4." Institute of Electrical and Electronics Engineers (Ieee)  Ieee Transactions On Sustainable Energy  1-1.
  • Crespo M, Santagiuliana G, Picot O, Portale G, Bilotti E and Gautrot JE (2019). "A Photoaddressable Liquid Crystalline Phase Transition in Graphene Oxide Nanocomposites." Advanced Functional Materials  vol. 29, (24)
  • Buchan AG, Dargaville S and Pain CC (2019). "A combined immersed body and adaptive mesh method for simulating neutron transport within complex structures." Elsevier Bv  Annals of Nuclear Energy  vol. 134, 88-100.
  • Guthrie DGP, Torabi M and Karimi N (2019). "Combined heat and mass transfer analyses in catalytic microreactors partially filled with porous material - The influences of nanofluid and different porous-fluid interface models." International Journal of Thermal Sciences  vol. 140, 96-113.
  • Li M, He B, Liang Z, Zhao C-G, Chen J, Zhuo Y, Xu G, Xie J and Althoefer K (2019). "An Attention-Controlled Hand Exoskeleton for the Rehabilitation of Finger Extension and Flexion Using a Rigid-Soft Combined Mechanism." Front Neurorobot  vol. 13, 34-34.
  • Banerjee SS, Hait S, Natarajan TS, Wiessner S, Stöckelhuber KW, Jehnichen D, Janke A, Fischer D, Heinrich G, Busfield JJC and Das A (2019). "Water-Responsive and Mechanically-Adaptive Natural Rubber Composites by in-Situ Modification of Mineral Filler Structures." American Chemical Society (Acs)  The Journal of Physical Chemistry B 
  • Gomari SR, Alizadeh R, Alizadeh A and Karimi N (2019). "Generation of entropy during forced convection of heat in nanofluid stagnation-point flows over a cylinder embedded in porous media." Numerical Heat Transfer; Part a: Applications  vol. 75, (10) 647-673.
  • Abdullah A and Bailey CG (2019). "Corrigendum to “Punching behaviour of column-slab connection strengthened with non-prestressed or prestressed FRP plates” [Eng. Struct. 160 (2018) 229–242] (Engineering Structures (2018) 160 (229–242), (S0141029616314018), (10.1016/j.engstruct.2018.01.030))." Engineering Structures  vol. 187,
  • Hales A and Jiang X (2019). "Optimisation of low energy cooling through phase variation between adjacent piezoelectric fan blades." Elsevier  International Journal of Heat and Mass Transfer  vol. 139, 362-372.
  • Chen C and JIANG X (2019). "Transport property prediction and inhomogeneity analysis of supercritical n-Dodecane by molecular dynamics simulation." Elsevier  Fuel  vol. 244, 48-60.
  • Wang S, Housden RJ, Noh Y, Singh A, Lindenroth L, Liu H, Althoefer K, Hajnal J, Singh D and Rhode K (2019). "Analysis of a customized clutch joint designed for the safety management of an ultrasound robot." Applied Sciences (Switzerland)  vol. 9, (9)
  • Torabi M, Karimi N, Ghiaasiaan M and Wongwises S (2019). "Non-Equilibrium Thermodynamics of Micro Technologies." Entropy  vol. 21, (5)
  • Feigin VL, Nichols E, Alam T, Bannick MS, Beghi E, Blake N, Culpepper WJ, Dorsey ER, Elbaz A, Ellenbogen RG, Fisher JL, Fitzmaurice C, Giussani G, Glennie L, James SL, Johnson CO, Kassebaum NJ, Logroscino G, Marin B, Mountjoy-Venning WC, Nguyen M, Ofori-Asenso R, Patel AP, Piccininni M, Roth GA, Steiner TJ, Stovner LJ, Szoeke CEI, Theadom A and Vollset SE (2019). "Global, regional, and national burden of neurological disorders, 1990–2016: a systematic analysis for the Global Burden of Disease Study 2016." The Lancet Neurology  vol. 18, (5) 459-480.
  • Johnson CO, Nguyen M, Roth GA, Nichols E, Alam T, Abate D, Abd-Allah F, Abdelalim A, Abraha HN, Abu-Rmeileh NM, Adebayo OM, Adeoye AM, Agarwal G, Agrawal S, Aichour AN, Aichour I, Aichour MTE, Alahdab F, Ali R, Alvis-Guzman N, Anber NH, Anjomshoa M, Arabloo J, Arauz A, Ärnlöv J, Arora A, Awasthi A, Banach M, Barboza MA and Barker-Collo SL (2019). "Global, regional, and national burden of stroke, 1990–2016: a systematic analysis for the Global Burden of Disease Study 2016." The Lancet Neurology  vol. 18, (5) 439-458.
  • Farkhatdinov I, Michalska H, Alain B and Vincent H (2019). "Idiothetic Verticality Estimation\\through Head Stabilization Strategy." Institute of Electrical and Electronics Engineers  Ieee Robotics and Automation Letters 
  • Gan Y, Li H, Jiang Z, Chen X, Luo Y, Tong Y, Shi Y and Jiang X (2019). "An experimental investigation on the electrospray characteristics in a meso-scale system at different modes." Elsevier  Experimental Thermal and Fluid Science  vol. 106, 130-137.
  • Papaioannou I, Daub M, Drieschner M, Duddeck F, Ehre M, Eichner L, Eigel M, Götz M, Graf W, Grasedyck L, Gruhlke R, Hömberg D, Kaliske M, Moser D, Petryna Y and Straub D (2019). "Assessment and design of an engineering structure with polymorphic uncertainty quantification." Gamm Mitteilungen  vol. 42, (2)
  • Leidinger LF, Breitenberger M, Bauer AM, Hartmann S, Wüchner R, Bletzinger KU, Duddeck F and Song L (2019). "Explicit dynamic isogeometric B-Rep analysis of penalty-coupled trimmed NURBS shells." Computer Methods in Applied Mechanics and Engineering  vol. 351, 891-927.
  • Del-Valle-Mojica JF, ALONSO-RASGADO MT, Jimenez-Cruz D, BAILEY C and Board T (2019). "Effect of femoral head size, subject weight and activity level on acetabular cement mantle stress following total hip arthroplasty." Wiley  Journal of Orthopaedic Research 
  • BAILEY CG, Diaz-Lopez R, Alonso-Rasgado T, Jimenez-Cruz D and Board T (2019). "Impact of femoroacetabular impingement and dysplasia of the hip on hip joint sphericity." Sage Publications  Hip International 
  • Roi DP, Mueller J-D, Lobotesis K, McCague C, Memarian S, Khan F and Mankad K (2019). "Intracranial aneurysms: looking beyond size in neuroimaging: the role of anatomical factors and haemodynamics." Quantitative Imaging in Medicine and Surgery  vol. 9, (4) 537-545.
  • Shiva A, Sadati SMH, Noh Y, Fra¿ J, Ataka A, Würdemann H, Hauser H, Walker ID, Nanayakkara T and Althoefer K (2019). "Elasticity Versus Hyperelasticity Considerations in Quasistatic Modeling of a Soft Finger-Like Robotic Appendage for Real-Time Position and Force Estimation." Soft Robotics  vol. 6, (2) 228-249.
  • Bach C, Duddeck F and Song L (2019). "Fixed-precision randomized low-rank approximation methods for nonlinear model order reduction of large systems." International Journal For Numerical Methods in Engineering  vol. 119, (8) 687-711.
  • HALES A and JIANG X (2019). "Geometric optimisation of piezoelectric fan arrays for low energy cooling." Elsevier  International Journal of Heat and Mass Transfer  vol. 137, 52-63.
  • PU JH, SHENG Q, Sun J, WANG W and WANG H (2019). "Dependence of nano-confined surface condensation on tangentially external force field." Elsevier  Journal of Molecular Liquids 
  • BUCHAN AG (2019). "An angular reduced order model for radiative transfer in non grey media." Elsevier  Journal of Quantitative Spectroscopy and Radiative Transfer 
  • Farkhatdinov I, Michalska H, Berthoz A and Hayward V (2019). "Gravito-inertial ambiguity resolved through head stabilization." Proceedings of The Royal Society a: Mathematical, Physical and Engineering Sciences  vol. 475, (2223)
  • Matsuno T, Wang Z, Althoefer K and Hirai S (2019). "Adaptive update of reference capacitances in conductive fabric based robotic skin." Ieee Robotics and Automation Letters  vol. 4, (2) 2212-2219.
  • Hunt G, Karimi N, Yadollahi B and Torabi M (2019). "The effects of exothermic catalytic reactions upon combined transport of heat and mass in porous microreactors." Elsevier  International Journal of Heat and Mass Transfer  vol. 134, 1227-1249.
  • Wang L, Karimi N, Sutardi T and Paul MC (2019). "Combustion Characteristics and Pollutant Emissions in Transient Oxy-Combustion of a Single Biomass Particle: A Numerical Study." Energy and Fuels  vol. 33, (2) 1556-1569.
  • BUSFIELD JJC and WINDSLOW R (2019). "Viscoelastic Modelling of Extrusion Damage in Elastomer Seals." Taylor & Francis  Soft Materials  vol. 17, (3) 228-240.
  • Raponi E, Bujny M, Olhofer M, Aulig N, Boria S and Duddeck F (2019). "Kriging-assisted topology optimization of crash structures." Computer Methods in Applied Mechanics and Engineering  vol. 348, 730-752.
  • Li G, Jiang X, Zhu J, Yang J, Liu C, Mu Y and Xu G (2019). "Combustion control using a lobed swirl injector and a plasma swirler." Applied Thermal Engineering  vol. 152, 92-102.
  • Chermprayong P, ZHANG K, Xiao F and Kovac M (2019). "An Integrated Delta Manipulator for Aerial Repair: A New Aerial Robotic System." Institute of Electrical and Electronics Engineers  Ieee Robotics and Automation Magazine 
  • Wang F, Contò FP, Naz N, Castrejón-Pita JR, Castrejón-Pita AA, Bailey CG, Wang W, Feng JJ and Sui Y (2019). "A fate-alternating transitional regime in contracting liquid filaments." Journal of Fluid Mechanics  vol. 860, 640-653.
  • Goto S, Angchaisuksiri P, Bassand J-P, Camm AJ, Dominguez H, Illingworth L, Gibbs H, Goldhaber SZ, Jing Z-C, Haas S, Kayani G, Koretsune Y, Lim TW, Oh S, Sawhney JPS, Turpie AGG, van Eickels M, Verheugt FWA, Kakkar AK and GARFIELD¿AF Investigators (2019). "Management and 1-Year Outcomes of Patients With Newly Diagnosed Atrial Fibrillation and Chronic Kidney Disease: Results From the Prospective GARFIELD - AF Registry." J Am Heart Assoc  vol. 8, (3)
  • Sutardi T, Paul MC and Karimi N (2019). "Investigation of coal particle gasification processes with application leading to underground coal gasification." Fuel  vol. 237, 1186-1202.
  • Zhan S, Li G, Na J and He W (2019). "Feedback noncausal model predictive control of wave energy converters." Control Engineering Practice  vol. 85, 110-120.
  • Rashidi S, Karimi N, Mahian O and Abolfazli Esfahani J (2019). "A concise review on the role of nanoparticles upon the productivity of solar desalination systems." Journal of Thermal Analysis and Calorimetry  vol. 135, (2) 1145-1159.
  • Ye W, Li Q and Zhang K (2019). "Kinematics and Performance Analysis of 2R2T Parallel Manipulator with Partially Decoupled Motion." Nongye Jixie Xuebao/Transactions of The Chinese Society For Agricultural Machinery  vol. 50, (1) 374-382.
  • Kaiser B, Pyttel T and Duddeck F (2019). "A generalised method for the coupling of a parallelogram-like unit cell with a macroscopic finite element to simulate the behaviour of textiles." International Journal of Material Forming 
  • Akbarzadeh M, Rashidi S, Karimi N and Omar N (2019). "First and second laws of thermodynamics analysis of nanofluid flow inside a heat exchanger duct with wavy walls and a porous insert." Journal of Thermal Analysis and Calorimetry  vol. 135, (1) 177-194.
  • Govone L, Torabi M, Wang L and Karimi N (2019). "Effects of nanofluid and radiative heat transfer on the double-diffusive forced convection in microreactors." Journal of Thermal Analysis and Calorimetry  vol. 135, (1) 45-59.
  • Alizadeh R, Karimi N, Arjmandzadeh R and Mehdizadeh A (2019). "Mixed convection and thermodynamic irreversibilities in MHD nanofluid stagnation-point flows over a cylinder embedded in porous media." Journal of Thermal Analysis and Calorimetry  vol. 135, (1) 489-506.
  • Hinds N, ANGIOI M, BIRN-JEFFERY AV and TWYCROSS-LEWIS R (2019). "A systematic review of shoulder injury prevalence, proportion, rate, type, onset, severity, mechanism and risk factors in female artistic gymnasts." Elsevier  Physical Therapy in Sport  vol. 35, 106-115.
  • Wang S, Housden J, Noh Y, Singh A, Back J, Lindenroth L, Liu H, Hajnal J, Althoefer K, Singh D and Rhode K (2019). "Design and Implementation of a Bespoke Robotic Manipulator for Extra-corporeal Ultrasound." J Vis Exp  (143)
  • Farkhatdinov I, Ebert J, Van Oort G, Vlutters M, Van Asseldonk E and Burdet E (2019). "Assisting Human Balance in Standing With a Robotic Exoskeleton." Ieee Robotics and Automation Letters  vol. 4, (2) 414-421.
  • BUSFIELD J (2019). "Modelling of elastomeric materials and products." Plastics, Rubber and Composites  vol. 48, (1) 1-2.
  • Alizadeh R, Gomari SR, Alizadeh A, Karimi N and Li LKB (2019). "Combined heat and mass transfer and thermodynamic irreversibilities in the stagnation-point flow of Casson rheological fluid over a cylinder with catalytic reactions and inside a porous medium under local thermal nonequilibrium." Computers and Mathematics With Applications 
  • Mousavi SM, Kamali R, Sotoudeh F, Karimi N and Khojasteh D (2019). "Large eddy simulation of pseudo shock structure in a convergent–long divergent duct." Computers and Mathematics With Applications 
  • Kazemian Y, Rashidi S, Esfahani JA and Karimi N (2019). "Simulation of conjugate radiation–forced convection heat transfer in a porous medium using the lattice Boltzmann method." Meccanica 
  • Li X, Ma D, Liu H, Tan W, Gong X, Zhang C and Li Y (2019). "Assessment of failure criteria and damage evolution methods for composite laminates under low-velocity impact." Composite Structures  vol. 207, 727-739.
  • Suwondo R, Cunningham L, Gillie M and Bailey C (2019). "Progressive collapse analysis of composite steel frames subject to fire following earthquake." Fire Safety Journal  vol. 103, 49-58.