Skip to main content
Menu

Division of Mechanical Engineering, Robotics and Design

Publications

   2021   |   2020   |   2019   |   2018   |   2017   |   2016   |   2015   |   2014   |   2013   |   2012   |   2011   
  • Martinez DM, Jiang X, Moulinec C and Emerson DR (2013). "Numerical simulations of turbulent jet flames with non-premixed combustion of hydrogen-enriched fuels." Computers & Fluids vol. 88, 688-701.
    01-12-2013
  • Jiang X, Hassan WAA and Gluyas J (2013). "Modelling and monitoring of geological carbon storage: A perspective on cross-validation." Applied Energy vol. 112, 784-792.
    01-12-2013
  • Zheng Y, Zhu M, Martinez DM and Jiang X (2013). "Large-eddy simulation of mixing and combustion in a premixed swirling combustor with synthesis gases." Computers & Fluids vol. 88, 702-714.
    01-12-2013
  • Zhao C, Chen X, Anthony EJ, Jiang X, Duan L, Wu Y and Dong W (2013). "Capturing CO2 in flue gas from fossil fuel-fired power plants using dry regenerable alkali metal-based sorbent." Progress in Energy and Combustion Science vol. 39 (6), 515-534.
    01-12-2013
  • Abdullah A, Bailey CG and Wu ZJ (2013). "Tests investigating the punching shear of a column-slab connection strengthened with non-prestressed or prestressed FRP plates." Elsevier Bv Construction and Building Materials vol. 48, 1134-1144.
    01-11-2013
  • Ali HM and Briggs A (2013). "Condensation heat transfer on pin-fin tubes: Effect of thermal conductivity and pin height." Applied Thermal Engineering vol. 60 (1-2), 465-471.
    01-10-2013
  • Wanninayake IB, Dasgupta P, Seneviratne LD and Althoefer K (2013). "Air-float palpation probe for tissue abnormality identification during minimally invasive surgery." Ieee Transactions On Biomedical Engineering vol. 60 (10), 2735-2744.
    30-09-2013
  • Buchan AG, Pain CC, Fang F and Navon IM (2013). "A POD reduced‐order model for eigenvalue problems with application to reactor physics." International Journal For Numerical Methods in Engineering vol. 95 (12), 1011-1032.
    21-09-2013
  • Barras J, Althoefer K, Kyriakidou G, Rowe M, Poplett I, Smith J, Murnane D and Assi S (2013). "Potential of nuclear quadrupole resonance spectroscopy for detection and characterization of counterfeit anti-malarial medicines." Tropical Medicine & International Health vol. 18, 21-21.

    01-09-2013
  • Taylor JG, Cutsuridis V, Hartley M, Althoefer K and Nanayakkara T (2013). "Observational Learning: Basis, Experimental Results and Models, and Implications for Robotics." Cognitive Computation vol. 5 (3), 340-354.
    01-09-2013
  • Hasan MR, Vepa R, Shaheed H and Huijberts H (2013). "Modelling and control of the barrett hand for grasping." Proceedings - Uksim 15th International Conference On Computer Modelling and Simulation, Uksim 2013, 230-235.
    05-08-2013
  • Kerl J, Lawn C and Beyrau F (2013). "Three-dimensional flame displacement speed and flame front curvature measurements using quad-plane PIV." Combustion and Flame vol. 160 (12), 2757-2769.
    29-07-2013
  • Gridley BM, Moxey GJ, Lewis W, Blake AJ and Kays DL (2013). "Conformational Isomerism in Monomeric, Low-Coordinate Group 12 Complexes Stabilized by a Naphthyl-Substitutedm-Terphenyl Ligand." Wiley Chemistry - a European Journal vol. 19 (34), 11446-11453.
    12-07-2013
  • Martinez DM and Jiang X (2013). "Numerical investigations of a hydrogen impinging flame with different finite-rate chemical kinetic mechanisms." Fuel vol. 109, 285-296.
    01-07-2013
  • Martinez DM and Jiang X (2013). "Large-eddy simulations of unsteady hydrogen annular flames." Computers & Fluids vol. 80, 429-440.
    01-07-2013
  • Carpi F and Shaheed H (2013). "Grand challenges in magnetic capsule endoscopy." Expert Review of Medical Devices vol. 10 (4), 433-436.
    01-07-2013
  • Tunnicliffe LB, Thomas AG, Busfield JJC and Farid AS (2013). "The effect of fillers on crosslinking, swelling and mechanical properties of peroxide-cured rubbers." Constitutive Models For Rubber Viii - Proceedings of The 8th European Conference On Constitutive Models For Rubbers, Eccmr 2013, 563-568.

    10-06-2013
  • Baumard TLM, Thomas AG and Busfield JJC (2013). "Evaluation of the tearing energy in a radial tyre." Constitutive Models For Rubber Viii - Proceedings of The 8th European Conference On Constitutive Models For Rubbers, Eccmr 2013, 377-382.

    10-06-2013
  • Wu G, Thomas AG and Busfield JJC (2013). "Effect of the blade sharpness on the blade abrasion of rubber." Constitutive Models For Rubber Viii - Proceedings of The 8th European Conference On Constitutive Models For Rubbers, Eccmr 2013, 65-68.

    10-06-2013
  • Zahabi H, Frediani G, Busfield JJC and Carpi F (2013). "Dielectric elastomer actuators for tuneable optics." Constitutive Models For Rubber Viii - Proceedings of The 8th European Conference On Constitutive Models For Rubbers, Eccmr 2013, 697-700.
    10-06-2013
  • Borhan TM and Bailey CG (2013). "Modelling basalt fibre reinforced glass concrete slabs at ambient and elevated temperatures." Springer Science and Business Media Llc Materials and Structures vol. 47 (6), 999-1009.
    09-06-2013
  • Goffin MA, Baker CMJ, Buchan AG, Pain CC, Eaton MD and Smith PN (2013). "Minimising the error in eigenvalue calculations involving the Boltzmann transport equation using goal-based adaptivity on unstructured meshes." Journal of Computational Physics vol. 242, 726-752.
    01-06-2013
  • Lawn C (2013). "Computational modelling of a thermo-acoustic travelling wave engine." Proceedings of The Institution of Mechanical Engineers, Part a: Journal of Power and Energy vol. 227 (4), 498-514.
    01-06-2013
  • Liu N, Li JM, Sun J and Wang HS (2013). "Heat transfer and pressure drop during condensation of R152a in circular and square microchannels." Experimental Thermal and Fluid Science vol. 47, 60-67.
    01-05-2013
  • Baker CMJ, Buchan AG, Pain CC, Tollit BS, Goffin MA, Merton SR and Warner P (2013). "Goal based mesh adaptivity for fixed source radiation transport calculations." Annals of Nuclear Energy vol. 55, 169-183.
    01-05-2013
  • Dinesh KKJR, Jiang X and van Oijen JA (2013). "Direct numerical simulation of non-premixed syngas burning with detailed chemistry." Fuel vol. 107, 343-355.
    01-05-2013
  • Valencia-Lazcano AA, Alonso-Rasgado T and Bayat A (2013). "Characterisation of breast implant surfaces and correlation with fibroblast adhesion." Journal of The Mechanical Behavior of Biomedical Materials vol. 21, 133-148.
    01-05-2013
  • Dinesh KKJR, Jiang X, van Oijen JA, Bastiaans RJM and de Goey LPH (2013). "Hydrogen-enriched nonpremixed jet flames: Effects of preferential diffusion." International Journal of Hydrogen Energy vol. 38 (11), 4848-4863.
    01-04-2013
  • Dinesh KKJR, Jiang X and van Oijen JA (2013). "Hydrogen-enriched non-premixed jet flames: Compositional structures with near-wall effects." International Journal of Hydrogen Energy vol. 38 (12), 5150-5164.
    01-04-2013
  • Merton SR, Buchan AG, Pain CC and Smedley-Stevenson RP (2013). "An adjoint-based method for improving computational estimates of a functional obtained from the solution of the Boltzmann Transport Equation." Annals of Nuclear Energy vol. 54, 1-10.
    01-04-2013
  • Fukahori Y, Sakulkaew K and Busfield JJC (2013). "Elastic-viscous transition in tear fracture of rubbers." Polymer vol. 54 (7), 1905-1915.
    22-03-2013
  • Borhan TM and Bailey CG (2013). "Structural behaviour of basalt fibre reinforced glass concrete slabs." Springer Science and Business Media Llc Materials and Structures vol. 47 (1-2), 77-87.
    19-03-2013
  • Barras J, Murnane D, Althoefer K, Assi S, Rowe MD, Poplett IJF, Kyriakidou G and Smith JAS (2013). "Nitrogen-14 nuclear quadrupole resonance spectroscopy: A promising analytical methodology for medicines authentication and counterfeit antimalarial analysis." Analytical Chemistry vol. 85 (5), 2746-2753.
    05-03-2013
  • Buchan AG, Pain CC, Tollit BS, Gomes JLMA, Eaton MD, Gorman GJ, Cooling CM, Goddard AJH, Nygaard ET, Angelo PL and Smith PN (2013). "Simulated spatially dependent transient kinetics analysis of the Oak Ridge Y12 plant criticality excursion." Progress in Nuclear Energy vol. 63, 12-21.
    01-03-2013
  • Zou Z, Chávez-Arreola A, Mandal P, Board TN and Alonso-Rasgado T (2013). "Optimization of the position of the acetabulum in a ganz periacetabular osteotomy by finite element analysis." Journal of Orthopaedic Research vol. 31 (3), 472-479.
    01-03-2013
  • Xiao D, Fang F, Du J, Pain CC, Navon IM, Buchan AG, ElSheikh AH and Hu G (2013). "Non-linear Petrov–Galerkin methods for reduced order modelling of the Navier–Stokes equations using a mixed finite element pair." Computer Methods in Applied Mechanics and Engineering vol. 255, 147-157.
    01-03-2013
  • Baker CMJ, Buchan AG, Pain CC, Farrell PE, Eaton MD and Warner P (2013). "Multimesh anisotropic adaptivity for the Boltzmann transport equation." Annals of Nuclear Energy vol. 53, 411-426.
    01-03-2013
  • Dinesh KKJR, Jiang X, Malalasekera W and Odedra A (2013). "Large eddy simulation of fuel variability and flame dynamics of hydrogen-enriched nonpremixed flames." Fuel Processing Technology vol. 107, 2-13.
    01-03-2013
  • Fang H, Fang Y and Zhang K (2013). "Kinematics and workspace analysis of a novel 3-DOF parallel manipulator with virtual symmetric plane." Proceedings of The Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science vol. 227 (3), 620-629.
    01-03-2013
  • Suarez E, Syed F, Alonso-Rasgado T, Mandal P and Bayat A (2013). "Up-regulation of tension-related proteins in keloids: Knockdown of hsp27, α2β1-integrin, and pai-2 shows convincing reduction of extracellular matrix production." Plastic and Reconstructive Surgery vol. 131 (2)
    01-02-2013
  • Yang B and Lawn C (2013). "Three-dimensional effects on the performance of a vertical axis tidal turbine." Ocean Engineering vol. 58, 1-10.
    15-01-2013
  • Polygerinos P, Seneviratne LD, Razavi R, Schaeffter T and Althoefer K (2013). "Triaxial catheter-tip force sensor for MRI-guided cardiac procedures." Ieee/Asme Transactions On Mechatronics vol. 18 (1), 386-396.
    01-01-2013
  • Sakulkaew K, Thomas AG and Busfield JJC (2013). "The effect of temperature on the tearing of rubber." Polymer Testing vol. 32 (1), 86-93.
    01-01-2013
  • Huang M, Thomas AG and Busfield JJC (2013). "The application of a carbon black filled elastomer to create a smart strain sensor." Constitutive Models For Rubber Viii - Proceedings of The 8th European Conference On Constitutive Models For Rubbers, Eccmr 2013, 705-710.
    01-01-2013
  • Lowe DJ, Chapman AV, Cook S and Busfield JJC (2013). "Studying NR/organo-montmorillonite nanocomposites with silane coupling agents via network visualization tem." Rubber Chemistry and Technology vol. 86 (4), 538-557.
    01-01-2013
  • Yaqub M, Bailey CG, Nedwell P, Khan QUZ and Javed I (2013). "Strength and stiffness of post-heated columns repaired with ferrocement and fibre reinforced polymer jackets." Elsevier Bv Composites Part B: Engineering vol. 44 (1), 200-211.
    01-01-2013
  • Wang HS, Sun J and Rose JW (2013). "Pressure drop during condensation in microchannels." American Society of Mechanical Engineers Journal of Heat Transfer: Transactions of The Asme vol. 135 (9)
    01-01-2013
  • Martinez DM, Jiang X, Moulinec C and Emerson DR (2013). "Numerical investigation of the effects of fuel variability on the dynamics of syngas impinging jet flames." Fuel vol. 103, 646-662.
    01-01-2013
  • Qin Y, Zhang K, Li J and Dai JS (2013). "Modelling and analysis of a rigid-compliant parallel mechanism." Robotics and Computer-Integrated Manufacturing vol. 29 (4), 33-40.
    01-01-2013
  • Fukahori Y, Hon AA, Jha V and Busfield JJC (2013). "MODIFIED GUTH-GOLD EQUATION FOR CARBON BLACK-FILLED RUBBERS." Rubber Chemistry and Technology vol. 86 (2), 218-232.
    01-01-2013
  • Ahmad NS, Heath WP and Li G (2013). "LMI-based Stability Criteria for Discrete-time Lur’e Systems with Monotonic, Sector-and Slope-restricted Nonlinearities." Ieee Ieee Transactions On Automatic Control vol. 58 (2), 459-465.
    01-01-2013
  • Dinesh KKJR, Jiang X, van Oijen JA, Bastiaans RJM and de Goey LPH (2013). "Influence of fuel variability on the characteristics of impinging non-premixed syngas burning." Proceedings of The Combustion Institute vol. 34 (2), 3219-3229.
    01-01-2013
  • Liu N, Li JM, Sun J and Wang HS (2013). "Heat transfer and pressure drop during condensation of R152a in circular and square microchannels." Elsevier/Science Direct Experimental Thermal and Fluid Science vol. 47, 60-67.
    01-01-2013
  • WANG HS and Rose JW (2013). "Heat Transfer and Pressure Drop during Laminar Annular Flow Condensation in Micro-Channels.", Editors: Thome JR. Taylor and Francis Experimental Heat Transfer vol. 26 (2-3), 247-265.
    01-01-2013
  • Zhang K, Dai JS and Fang Y (2013). "Geometric constraint and mobility variation of Two 3SvPS v metamorphic parallel mechanisms." Journal of Mechanical Design, Transactions of The Asme vol. 135 (1)
    01-01-2013
  • Chen B, Busfield JJC, Stewart M and Cain MG (2013). "Electrical breakdown of dielectric elastomer actuator materials." Constitutive Models For Rubber Viii - Proceedings of The 8th European Conference On Constitutive Models For Rubbers, Eccmr 2013, 701-704.
    01-01-2013
  • Ali H, Wang HS, Briggs A and Rose JW (2013). "Effects of vapor velocity and pressure on Marangoni condensation of steam-ethanol mixtures on a horizontal tube." Journal of Heat Transfer: Transactions of The Asme vol. 135 (3)
    01-01-2013
  • Sun J, Wang W and Wang HS (2013). "Dependence of nanoconfined liquid behavior on boundary and bulk factors." Physical Review E: Statistical, Nonlinear, and Soft Matter Physics vol. 87
    01-01-2013
  • Sun J, Wang W and Wang HS (2013). "Dependence between velocity slip and temperature jump in shear flows." American Institute of Physics The Journal of Chemical Physics vol. 138 (23)
    01-01-2013
  • Gridley BM, Blundell TJ, Moxey GJ, Lewis W, Blake AJ and Kays DL (2013). "Cubane and dicubane complexes stabilised by sterically demanding m-terphenyl ligands." Royal Society of Chemistry (Rsc) Chemical Communications vol. 49 (84), 9752-9752.
    01-01-2013
  • Xu S, Jahn W and Müller J-D (2013). "CAD-based shape optimisation with CFD using a discrete adjoint." International Journal For Numerical Methods in Fluids
    01-01-2013
  • Ge YT, Fsadni AM and Wang HS (2013). "Bubble dissolution in horizontal turbulent bubbly flow in domestic central heating system." Elsevier/Science Direct Applied Energy vol. 108, 477-485.
    01-01-2013
  • Ali MN, Busfield JJC and Rehman IU (2013). "Auxetic oesophageal stents: structure and mechanical properties." Journal of Materials Science: Materials in Medicine, 1-27.
    01-01-2013
  • Cai XW, Tan JJ, Ma XJ, Zhang M and Wang HS (2013). "Application of hybrid Cartesian grid and gridless approach to moving boundary flow problems." International Journal For Numerical Methods in Fluids vol. 72, 994-1013.
    01-01-2013
  • Li G, Herrmann G, Stoten DP, Tu J and Turner MC (2013). "Application of Robust Antiwindup Techniques to Dynamically Substructured Systems." Ieee Mechatronics, Ieee/Asme Transactions On vol. 18 (1), 263-272.
    01-01-2013
  • Morales RM, Li G and Heath WP (2013). "Anti-windup and the preservation of robustness against structured norm-bounded uncertainty." Wiley Online International Journal of Robust and Nonlinear Control
    01-01-2013
  • Ali HM and Briggs A (2013). "An investigation of condensate retention on pin-fin tubes." Applied Thermal Engineering
    01-01-2013