Division of Mechanical Engineering, Robotics and Design
- Shorter R, Smith JD, Coveney VA and Busfield JJC (2010). "Axial compression of hollow elastic spheres." Journal of Mechanics of Materials and Structures vol. 5, (5) 693-705.
- Zhang K, Dai JS and Fang Y (2010). "Topology and constraint analysis of phase change in the metamorphic chain and its evolved mechanism." Journal of Mechanical Design, Transactions of The Asme vol. 132, (12)
- Fitzgerald CL, Briggs A, Wang H and Rose JW (2010). "Effect of vapour velocity on condensation of ethylene glycol on horizontal integral fin tubes: Heat transfer and retention angle measurements." 2010 14th International Heat Transfer Conference, Ihtc 14 vol. 2, 89-96.
- Gabriel P, Fukahori Y, Thomas AG and Busfield JJC (2010). "Fea modeling of schallamach waves." Rubber Chemistry and Technology vol. 83, (4) 358-367.
- McConlogue T, Mueller J and Shelton J (2010). "Challenges of developing engineering students' writing through peer assessment." Engineering Education 2010: Inspiring The Next Generation of Engineers, Ee 2010
- Ilett T and Lawn CJ (2010). "Thermodynamic and economic analysis of advanced and externally fired gas turbine cycles." Proceedings of The Institution of Mechanical Engineers, Part a: Journal of Power and Energy vol. 224, (7) 901-915.
- Barbieri E and Meo M (2010). "Time reversal DORT method applied to nonlinear elastic wave scattering." Wave Motion vol. 47, (7) 452-467.
- Fukahori Y, Gabriel P and Busfield JJC (2010). "How does rubber truly slide between Schallamach waves and stick-slip motion?" Wear vol. 269, (11-12) 854-866.
- Karimi N, Brear MJ and Moase WH (2010). "On the interaction of sound with steady heat communicating flows." Journal of Sound and Vibration vol. 329, (22) 4705-4718.
- Rahideh A and Shaheed MH (2010). "Real time nonlinear model predictive control for fast systems." Speedam 2010 - International Symposium On Power Electronics, Electrical Drives, Automation and Motion 1732-1737.
- Polygerinos P, Zbyszewski D, Schaeffter T, Razavi R, Seneviratne LD and Althoefer K (2010). "MRI-compatible fiber-optic force sensors for catheterization procedures." Ieee Sensors Journal vol. 10, (10) 1598-1608.
- Amerini F, Barbieri E, Meo M and Polimeno U (2010). "Detecting loosening/tightening of clamped structures using nonlinear vibration techniques." Smart Materials & Structures vol. 19, (8)
- Zhang K, Fang Y, Fang H and Dai JS (2010). "Geometry and constraint analysis of the three-spherical kinematic chain based parallel mechanism." Journal of Mechanisms and Robotics vol. 2, (3)
- Dai XH, Wang YC and Bailey CG (2010). "Numerical modelling of structural fire behaviour of restrained steel beam–column assemblies using typical joint types." Elsevier Bv Engineering Structures vol. 32, (8) 2337-2351.
- Suphadon N, Thomas AG and Busfield JJC (2010). "The viscoelastic behavior of rubber under a complex loading. II. The effect large strains and the incorporation of carbon black." Journal of Applied Polymer Science vol. 117, (3) 1290-1297.
- Jiang X, Luo KH, de Goey LPH, Bastiaans RJM and van Oijen JA (2010). "Swirling and Impinging Effects in an Annular Nonpremixed Jet Flame." Springer Science and Business Media Llc Flow, Turbulence and Combustion vol. 86, (1) 63-88.
- Li D, Zhang Z, Dai J and Zhang K (2010). "Overview and prospects of metamorphic mechanism." Jixie Gongcheng Xuebao/Journal of Mechanical Engineering vol. 46, (13) 14-21.
- Song TY, Yu GX, Wang HS, Rose JW and Ma XH (2010). "Pressure drop coefficient for abrupt contraction of parallel multi-microchannels." Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics vol. 31, (7) 1219-1222.
- Zbyszewski D, Challacombe B, Li J, Seneviratne L, Althoefer K, Dasgupta P and Murphy D (2010). "A comparative study between an improved novel air-cushion sensor and a wheeled probe for minimally invasive surgery." Journal of Endourology vol. 24, (7) 1155-1159.
- Suphadon N, Thomas AG and Busfield JJC (2010). "The viscoelastic behaviour of rubber under a small simple shear oscillation superimposed on a large pure shear." Polymer Testing vol. 29, (4) 440-444.
- Liu H, Puangmali P, Zbyszewski D, Elhage O, Dasgupta P, Dai JS, Seneviratne L and Althoefer K (2010). "An indentation depth-force sensing wheeled probe for abnormality identification during minimally invasive surgery." Proceedings of The Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine vol. 224, (6) 751-763.
- Al-Milli S, Seneviratne LD and Althoefer K (2010). "Track-terrain modelling and traversability prediction for tracked vehicles on soft terrain." Journal of Terramechanics vol. 47, (3) 151-160.
- Smith JAS, Rayner TJ, Rowe MD, Barras J, Peirson NF, Stevens AD and Althoefer K (2010). "Magnetic field-cycling NMR and 14N, 17O quadrupole resonance in the explosive pentaerythritol tetranitrate (PETN)." Journal of Magnetic Resonance vol. 204, (1) 139-144.
- Jha V, Thomas AG, Bennett M and Busfield JJC (2010). "Reversible electrical behavior with strain for a carbon black-filled rubber." Journal of Applied Polymer Science vol. 116, (1) 541-546.
- Jiang X, Siamas GA, Jagus K and Karayiannis TG (2010). "Physical modelling and advanced simulations of gas–liquid two-phase jet flows in atomization and sprays." Elsevier Bv Progress in Energy and Combustion Science vol. 36, (2) 131-167.
- Busfield J and Adams J (2010). "Getting smarter." Materials World vol. 18, (4) 19-21.
- Puigt G, Auffray V and Müller JD (2010). "Discretisation of diffusive fluxes on hybrid grids." Journal of Computational Physics vol. 229, (5) 1425-1447.
- Ciselli P, Lu L, Busfield JJC and Peijs T (2010). "Piezoresistive polymer composites based on EPDM and MWNTs for strain sensing applications." E-Polymers
- Gabriel P, Thomas AG and Busfield JJC (2010). "Influence of interface geometry on rubber friction." Wear vol. 268, (5-6) 747-750.
- Liang H, Fukahori Y, Thomas AG and Busfield JJC (2010). "The steady state abrasion of rubber: Why are the weakest rubber compounds so good in abrasion?" Wear vol. 268, (5-6) 756-762.
- Puangmali P, Althoefer K and Seneviratne LD (2010). "Mathematical modeling of intensity-modulated bent-tip optical fiber displacement sensors." Ieee Transactions On Instrumentation and Measurement vol. 59, (2) 283-291.
- Liu H, Seneviratne LD, Althoefer K, Noonan DP, Challacombe BJ and Dasgupta P (2010). "Rolling Mechanical Imaging for Tissue Abnormality Localization During Minimally Invasive Surgery." Ieee Transactions On Biomedical Engineering vol. 57, (2) 404-414.
- Heath WP and Li G (2010). "Multipliers for model predictive control with structured input constraints." Pergamon Automatica vol. 46, 562-568.
- Song TY, Yu GX, Ma XH, Rose JW and Wang HS (2010). "Pressure drop during condensation in microchannels." Asme 2010 8th International Conference On Nanochannels, Microchannels, and Minichannels Collocated With 3rd Joint Us-European Fl (PARTS A AND B) 95-99.
- Song TY, Wang HS, Rose JW, Yu GX and Ma XH (2010). "Experiment on frictional pressure drop of condensation in microchannel." Journal of Refrigeration vol. 31, 24-28.
- Lawn C (2010). "Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy: Editorial." Proceedings of The Institution of Mechanical Engineers, Part a: Journal of Power and Energy vol. 224, (1)
- Ilett T and Lawn CJ (2010). "Thermodynamic and economic analysis of advanced and externally fired gas turbine cycles." Proceedings of The Institution of Mechanical Engineers Part a-Journal of Power and Energy vol. 224, (A7) 901-915.
- Tu JY, Lin PY, Stoten DP and Li G (2010). "Testing of dynamically substructured, base-isolated systems using adaptive control techniques." Wiley Online Library Earthquake Engineering & Structural Dynamics vol. 39, 661-681.
- Barbieri E and Meo M (2010). "Discriminating linear from nonlinear elastic damage using a nonlinear time reversal DORT method." International Journal of Solids and Structures vol. 47,
- Li G, Stoten DP and Tu J-Y (2010). "Model predictive control of dynamically substructured systems with application to a servohydraulically actuated mechanical plant." Iet Control Theory & Applications, Iet vol. 4, (2) 253-264.