Division of Materials Engineering


   2022   |   2021   |   2020   |   2019   |   2018   |   2017   |   2016   |   2015   |   2014   |   2013   |   2012   
  • MacDonald TJ, Clancy AJ, Xu W, Jiang Z, Lin CT, Mohan L, Du T, Tune DD, Lanzetta L, Min G, Webb T, Ashoka A, Pandya R, Tileli V, McLachlan MA, Durrant JR, Haque SA and Howard CA (2021). "Phosphorene Nanoribbon-Augmented Optoelectronics for Enhanced Hole Extraction." Journal of The American Chemical Society vol. 143 (51), 21549-21559.
  • Weinkamer R, Gupta H, Lebowitz JL and Fratzl P (2021). "Precipitate Size Distribution in Alloys with and without Lattice Misfit." International Journal of Materials Research vol. 92 (1), 9-13.
  • Weng Z, Dixon SC, Lee LY, Humphreys CJ, Guiney I, Fenwick O and Gillin WP (2021). "Wafer‐Scale Graphene Anodes Replace Indium Tin Oxide in Organic Light‐Emitting Diodes." Wiley Advanced Optical Materials, 2101675-2101675.
  • Trifiletti V, Luong S, Tseberlidis G, Riva S, Suena Galindez E, Gillin W, Binetti S and Fenwick O (2021). "Two-Step Synthesis of Bismuth-Based Hybrid Halide Perovskite Thin-Films." Mdpi Materials vol. 14 (24), 7827-7827.
  • Martin C, Jonckheere D, Coutino-Gonzalez E, Smolders S, Bueken B, Marquez C, Krajnc A, Willhammar T, Kennes K, Fenwick O, Richard F, Samorì P, Mali G, Hofkens J, Roeffaers MBJ and De Vos DE (2021). "Metal-biomolecule frameworks (BioMOFs): a novel approach for green optoelectronic applications." Royal Society of Chemistry Chemical Communications
  • Jayaseelan DD, Pramana S, Grasso S, Bai Y, Skinner S, Reece MJ and Lee WE (2021). "Fabrication and characterisation of single-phase Hf2Al4C5 ceramics." Elsevier Journal of The European Ceramic Society vol. 42 (4), 1292-1301.
  • Du T, Macdonald TJ, Yang RX, Li M, Jiang Z, Mohan L, Xu W, Su Z, Gao X, Whiteley R, Lin C-T, Min G, Haque SA, Durrant JR, Persson KA, McLachlan MA and Briscoe J (2021). "Additive-free, Low-temperature Crystallization of Stable α-FAPbI3 Perovskite." Adv Mater, e2107850-e2107850.
  • Schmuck B, Greco G, Barth A, Pugno NM, Johansson J and Rising A (2021). "High-yield production of a super-soluble miniature spidroin for biomimetic high-performance materials." Elsevier Materials Today vol. 50, 16-23.
  • Pugno NM (2021). "The centenary of Griffith's theory." Matter vol. 4 (12), 3811-3813.
  • Mehanna YA and Crick CR (2021). "Image analysis methodology for a quantitative evaluation of coating abrasion resistance." Applied Materials Today vol. 25
  • Wan K, Liu Z, Schroeder BC, Chen G, Santagiuliana G, Papageorgiou DG, Zhang H and Bilotti E (2021). "Highly stretchable and sensitive self-powered sensors based on the N-Type thermoelectric effect of polyurethane/Nax(Ni-ett)n/graphene oxide composites." Composites Communications vol. 28
  • Lanzetta L, Webb T, Zibouche N, Liang X, Ding D, Min G, Westbrook RJE, Gaggio B, Macdonald TJ, Islam MS and Haque SA (2021). "Degradation mechanism of hybrid tin-based perovskite solar cells and the critical role of tin (IV) iodide." Nature Communications vol. 12 (1)
  • Raynold AAM, Li D, Chang L and Gautrot JE (2021). "Competitive binding and molecular crowding regulate the cytoplasmic interactome of non-viral polymeric gene delivery vectors." Nature Communications vol. 12 (1)
  • Portnoi M, Haigh PA, Macdonald TJ, Ambroz F, Parkin IP, Darwazeh I and Papakonstantinou I (2021). "Bandwidth limits of luminescent solar concentrators as detectors in free-space optical communication systems." Light: Science and Applications vol. 10 (1)
  • Tabassum M, Zia Q, Zhou Y, Reece MJ and Su L (2021). "A review on advances in doping with alkali metals in halide perovskite materials." Sn Applied Sciences vol. 3 (12)
  • Yue Y, Xu X, Zhang M, Yan Z, Koval V, Whiteley RM, Zhang D, Palma M, Abrahams I and Yan H (2021). "Grain Size Effects in Mn-Modified 0.67BiFeO3-0.33BaTiO3Ceramics." Acs Applied Materials and Interfaces vol. 13 (48), 57548-57559.
  • Inamdar SR, Prévost S, Terrill NJ, Knight MM and Gupta HS (2021). "Reversible changes in the 3D collagen fibril architecture during cyclic loading of healthy and degraded cartilage." Elsevier Acta Biomaterialia vol. 136, 314-326.
  • Jalali SK, Beigrezaee MJ and Pugno NM (2021). "Reporting a misunderstanding in relating the Young's modulus to functionally graded porosity." Composite Structures vol. 281
  • Wen Y, Kok MDR, Tafoya JPV, Sobrido ABJ, Bell E, Gostick JT, Herou S, Schlee P, Titirici M-M, Brett DJL, Shearing PR and Jervis R (2021). "Electrospinning as a route to advanced carbon fibre materials for selected low-temperature electrochemical devices: a review." Elsevier Journal of Energy Chemistry vol. 59, 492-529.
  • Zhang M, Zhang H, Jiang Q, Gao F, Chen R, Zhang D, Reece MJ, Yang B, Viola G and Yan H (2021). "Terahertz characterization of lead-free dielectrics for different applications." Acs Applied Materials and Interfaces vol. 13 (45), 53492-53503.
  • Peng L and Gautrot JE (2021). "Long term expansion profile of mesenchymal stromal cells at protein nanosheet-stabilised bioemulsions for next generation cell culture microcarriers." Elsevier Materials Today Bio vol. 12, 100159-100159.
  • Carrola M, Asadi A, Zhang H, Papageorgiou DG, Bilotti E and Koerner H (2021). "Best of Both Worlds: Synergistically Derived Material Properties via Additive Manufacturing of Nanocomposites (Adv. Funct. Mater. 46/2021)." Advanced Functional Materials vol. 31 (46), 2170343-2170343.
  • Balestra S, Costagliola G, Pegoraro A, Picollo F, Molinari JF, Pugno NM, Vittone E, Bosia F and Sin A (2021). "Experimental and Numerical Study of the Effect of Surface Patterning on the Frictional Properties of Polymer Surfaces." Journal of Tribology vol. 144 (3)
  • Dong M, Zhang H, Tzounis L, Santagiuliana G, Bilotti E and Papageorgiou DG (2021). "Multifunctional epoxy nanocomposites reinforced by two-dimensional materials: A review." Elsevier Carbon vol. 185, 57-81.
  • Zhang X, Jiang X, Qu S, Zhang H, Yang W and Lu W (2021). "Effects of ultrasonication on the microstructures and mechanical properties of carbon nanotube films and their based composites." Elsevier Composites Science and Technology, 109136-109136.
  • Deng Y, Liang Z, Lu X, Chen D, Li Z and Wang F (2021). "The degradation mechanisms of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) by different chemical methods: A critical review." Chemosphere vol. 283
  • Danov KD, Lyutskanova-Zhekova GS and Smoukov SK (2021). "Motion of long bubbles in gravity- And pressure-driven flow through cylindrical capillaries up to moderate capillary numbers." Physics of Fluids vol. 33 (11)
  • Csanádi T, Girman V, Maj Ł, Morgiel J, Reece MJ and Dusza J (2021). "Hardness anisotropy and active slip systems in a (Hf-Ta-Zr-Nb)C high-entropy carbide during nanoindentation." International Journal of Refractory Metals and Hard Materials vol. 100
  • Tanner L (2021). "Editorial - Our New Board." Proceedings of The Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine vol. 235 (11), 1219-1220.
  • Upton RL, Fedosyuk A, Edel JB and Crick CR (2021). "Carbon Nanofiber/SiO2 Nanoparticle/HDPE Composites as Physically Resilient and Submersible Water-Repellent Coatings on HDPE Substrates." Acs Applied Nano Materials vol. 4 (10), 10090-10102.
  • Koliolios E, Mills DG, Busfield JJC and Tan W (2021). "The Nail Penetration Behaviour of Carbon Nanotube Composite Electrodes for Energy Storage." Frontiers Media Frontiers in Materials vol. 8, 741541-741541.
  • Cheng Z-Q, Xiong J-J and Tan W (2021). "Fatigue Crack Growth and Life Prediction of 7075-T62 Aluminium-alloy Thin-sheets with Low-velocity Impact Damage under Block Spectrum Loading." Elsevier International Journal of Fatigue, 106618-106618.
  • Nguyen KDQ, Crespo-Ribadeneyra M, Picot O, Colak B and Gautrot JE (2021). "Ultrafast Photo-Crosslinking of Thiol–Norbornene Opaque Silicone Elastomer Nanocomposites in Air." American Chemical Society Acs Applied Polymer Materials
  • Luo Z, Burrows SA, Fan X, Smoukov SK and Boek ES (2021). "Virtual voids method to generate low-density microporous carbon structures using quenched molecular dynamics simulation." Carbon vol. 183, 438-448.
  • Kyei-Manu WA, Tunnicliffe LB, Plagge J, Herd CR, Akutagawa K, Pugno NM and Busfield JJC (2021). "Thermomechanical Characterization of Carbon Black Reinforced Rubbers During Rapid Adiabatic Straining." Frontiers in Materials vol. 8, 743146-743146.
  • Florio G, Pugno NM, Buehler MJ and Puglisi G (2021). "A coarse-grained mechanical model for folding and unfolding of tropoelastin with possible mutations." Acta Biomaterialia vol. 134, 477-489.
  • Yanes E, Pugno NM, Ramier J, Berryhill B and Busfield JJC (2021). "Characterising the friction coefficient between rubber O-rings and a rigid surface under extreme pressures." Polymer Testing, 107378-107378.
  • Trifiletti V, Asker C, Tseberlidis G, Riva S, Zhao K, Tang W, Binetti S and Fenwick O (2021). "Quasi-Zero Dimensional Halide Perovskite Derivates: Synthesis, Status, and Opportunity." Frontiers in Electronics vol. 2
  • Vitanov I, Farkhatdinov I, Denoun B, Palermo F, Otaran A, Brown J, Omarali B, Abrar T, Hansard M, Oh C, Poslad S, Liu C, Godaba H, Zhang K, Jamone L and Althoefer K (2021). "A Suite of Robotic Solutions for Nuclear Waste Decommissioning." Robotics vol. 10 (4), 112-112.
  • Zhang X, Xiang D, Wu Y, Harkin-Jones E, Shen J, Ye Y, Tan W, Wang J, Wang P, Zhao C and Li Y (2021). "High-Performance Flexible Strain Sensors Based on Biaxially Stretched Conductive Polymer Composites with Carbon Nanotubes Immobilized on Reduced Graphene Oxide." Elsevier Composites Part a: Applied Science and Manufacturing, 106665-106665.
  • Bucciarelli A, Greco G, Corridori I, Motta A and Pugno NM (2021). "Tidy dataset of the experimental design of the optimization of the alkali degumming process of Bombyx mori silk." Data in Brief vol. 38
  • Biesuz M, Saunders TG, Veverka J, Bortolotti M, Vontorová J, Vilémová M and Reece MJ (2021). "Solidification microstructures of multielement carbides in the high entropy Zr-Nb-Hf-Ta-Cx system produced by arc melting." Scripta Materialia vol. 203
  • Cheng ZQ, Tan W and Xiong JJ (2021). "Progressive damage modelling and fatigue life prediction of Plain-weave composite laminates with Low-velocity impact damage." Composite Structures vol. 273
  • Kaur A, Gautrot JE, Cavalli G, Watson D, Bickley A, Akutagawa K and Busfield JJC (2021). "Novel crosslinking system for poly-chloroprene rubber to enable recyclability and introduce self-healing." Polymers vol. 13 (19)
  • Le B, Kernin A, Khaliq J, Fu G, Huo D, Bilotti E, Zhang H and Shyha I (2021). "Micro-end-milling of carbon nanotube reinforced epoxy nanocomposites manufactured using three roll mill technique." Journal of Manufacturing Processes vol. 70, 307-320.
  • Rombach FM, Haque SA and Macdonald TJ (2021). "Lessons learned from spiro-OMeTAD and PTAA in perovskite solar cells." Energy and Environmental Science vol. 14 (10), 5161-5190.
  • Din AR, Althoefer K, Farkhatdinov I, Brown J, Morgan C and Shahdad S (2021). "Innovation in the time of SARS-CoV-2: A collaborative journey between NHS clinicians, engineers, academics and industry." Surgeon vol. 19 (5), e281-e288.
  • Viola G, Tian Y, Yu C, Tan Y, Koval V, Wei X, Choy KL and Yan H (2021). "Electric field-induced transformations in bismuth sodium titanate-based materials." Progress in Materials Science vol. 122
  • Bodian S, Colchester RJ, Macdonald TJ, Ambroz F, Briceno de Gutierrez M, Mathews SJ, Fong YMM, Maneas E, Welsby KA, Gordon RJ, Collier P, Zhang EZ, Beard PC, Parkin IP, Desjardins AE and Noimark S (2021). "CuInS2 Quantum Dot and Polydimethylsiloxane Nanocomposites for All-Optical Ultrasound and Photoacoustic Imaging." Advanced Materials Interfaces vol. 8 (20)
  • Ahmed S, Zhang M, Koval V, Zou L, Shen Z, Chen R, Yang B and Yan H (2021). "Terahertz probing of low temperature degradation in zirconia bio‐ceramics." Journal of The American Ceramic Society
  • Eze MC, Ugwuanyi G, Li M, Eze HU, Rodriguez GM, Evans A, Rocha VG, Li Z and Min G (2021). "Optimum silver contact sputtering parameters for efficient perovskite solar cell fabrication." Solar Energy Materials and Solar Cells vol. 230
  • Avosani S, Berardo A, Pugno NM, Verrastro V, Mazzoni V and Cornara D (2021). "Vibrational disruption of feeding behaviors of a vector of plant pathogen." E Schweizerbart Science Publishers Entomologia Generalis vol. 41 (5), 481-495.
  • Tan W, Stallard JC, Jo C, De Volder MFL and Fleck NA (2021). "The mechanical and electrochemical properties of polyaniline-coated carbon nanotube mat." Journal of Energy Storage vol. 41
  • Sadler E and Crick CR (2021). "Suction or gravity-fed oil-water separation using PDMS-coated glass filters." Sustainable Materials and Technologies vol. 29
  • Braniste T, Ciobanu V, Schütt F, Mimura H, Raevschi S, Adelung R, Pugno NM and Tiginyanu I (2021). "Self-propelled aero-gan based liquid marbles exhibiting pulsed rotation on the water surface." Materials vol. 14 (17)
  • Cholakova D, Lisicki M, Smoukov SK, Tcholakova S, Lin EE, Chen J, De Canio G, Lauga E and Denkov N (2021). "Rechargeable self-assembled droplet microswimmers driven by surface phase transitions." Nature Physics vol. 17 (9), 1050-1055.
  • Tao Y, Ren M, Zhang H and Peijs T (2021). "Recent progress in acoustic materials and noise control strategies – A review." Applied Materials Today vol. 24
  • TANNER KE (2021). "Editorial." Proc Inst Mech Eng H vol. 235 (9), 975-975.
  • Wang K, Mak C, Ho JDL, Liu Z, Sze K, Wong KKY, Althoefer K, Liu Y, Fukuda T and Kwok K-W (2021). "Large‐Scale Surface Shape Sensing with Learning‐Based Computational Mechanics." Advanced Intelligent Systems vol. 3 (11)
  • Fan X, Wang F, Gao Q, Zhang Y, Huang F, Xiao R, Qin J, Zhang H, Shi X and Zhang G (2021). "Nature inspired hierarchical structures in nano-cellular epoxy/graphene-Fe3O4 nanocomposites with ultra-efficient EMI and robust mechanical strength." Elsevier Journal of Materials Science and Technology
  • Fan X, Gao Q, Gao Y, Zhang G, Huang F, Xiao R, Liu W, Wang F, Qin J, Bilotti E, Zhang H and Shi X (2021). "Microcellular epoxy/graphene nanocomposites with outstanding electromagnetic interference shielding and mechanical performance by overcoming nanofiller loading/dispersion dichotomy." Composites Science and Technology, 109000-109000.
  • Zhang M, Wang Y, Liu J, Thangamuthu M, Yue Y, Yan Z, Feng J, Zhang D, Zhang H, Guan S, Titirici M, Abrahams I, Tang J, Zhang Z, Dunn S and Yan H (2021). "Facile one-step synthesis and enhanced photocatalytic activity of WC/ferroelectric nanocomposite." Royal Society of Chemistry (Rsc) Journal of Materials Chemistry A
  • Westbrook RJE, Macdonald TJ, Xu W, Lanzetta L, Marin-Beloqui JM, Clarke TM and Haque SA (2021). "Lewis Base Passivation Mediates Charge Transfer at Perovskite Heterojunctions." Journal of The American Chemical Society vol. 143 (31), 12230-12243.
  • Mohan L, Ratnasingham S, Panidi J, Daboczi M, Kim J-S, Anthopoulos T, Briscoe J, McLachlan M and Kreouzis T (2021). "Determining out-of-plane hole mobility in CuSCN via the time-of-flight technique to elucidate its function in perovskite solar cells." American Chemical Society Acs Applied Materials and Interfaces
  • Pedrielli A, de Vera P, Trevisanutto PE, Pugno NM, Garcia-Molina R, Abril I, Taioli S and Dapor M (2021). "Electronic excitation spectra of cerium oxides: from ab initio dielectric response functions to Monte Carlo electron transport simulations." Phys Chem Chem Phys
  • Caorsi V, Cornara D, Wells KE, Moser D, Berardo A, Miselli R, Torriani M, Pugno NM, Tasin M, Maistrello L and Mazzoni V (2021). "Design of ideal vibrational signals for stinkbug male attraction through vibrotaxis experiments." Wiley Pest Management Science vol. 77 (12), 5498-5508.
  • Pristovsek M, Frentrup M, Zhu T, Kusch G and Humphreys CJ (2021). "X-ray characterisation of the basal stacking fault densities of (112̄2) GaN." Royal Society of Chemistry Crystengcomm vol. 23 (35), 6059-6069.
  • Zhang M, Tang Z, Zhang H, Smith G, Jiang Q, Saunders T, Yang B and Yan H (2021). "Characterization of microwave and terahertz dielectric properties of single crystal La2Ti2O7 along one single direction." Journal of The European Ceramic Society
  • Baláž M, Dobrozhan O, Tešinský M, Zhang RZ, Džunda R, Dutková E, Rajňák M, Chen K, Reece MJ and Baláž P (2021). "Scalable and environmentally friendly mechanochemical synthesis of nanocrystalline rhodostannite (Cu2FeSn3S8)." Powder Technology vol. 388, 192-200.
  • Bati ASR, Hao M, Macdonald TJ, Batmunkh M, Yamauchi Y, Wang L and Shapter JG (2021). "1D-2D Synergistic MXene-Nanotubes Hybrids for Efficient Perovskite Solar Cells." Small vol. 17 (32)
  • Carrola M, Asadi A, Zhang H, Papageorgiou DG, Bilotti E and Koerner H (2021). "Best of Both Worlds: Synergistically Derived Material Properties via Additive Manufacturing of Nanocomposites." Wiley Advanced Functional Materials vol. 31 (46)
  • Wolff JO, Liprandi D, Bosia F, Joel A-C and Pugno NM (2021). "Robust substrate anchorages of silk lines with extensible nano-fibres." Soft Matter vol. 17 (34), 7903-7913.
  • Carboni S, Evans S, Tanner KE, Davie A, Bekaert M and Fitzer SC (2021). "Are Shell Strength Phenotypic Traits in Mussels Associated with Species Alone?" Mdpi Ag Aquaculture Journal vol. 1 (1), 3-13.
  • Clarke AJ, Luke J, Meitzner R, Wu J, Wang Y, Lee HKH, Speller EM, Bristow H, Cha H, Newman MJ, Hooper K, Evans A, Gao F, Hoppe H, McCulloch I, Schubert US, Watson TM, Durrant JR, Tsoi WC, Kim JS and Li Z (2021). "Non-fullerene acceptor photostability and its impact on organic solar cell lifetime." Cell Reports Physical Science vol. 2 (7)
  • Finn PA, Asker C, Wan K, Bilotti E, Fenwick O and Nielsen CB (2021). "Thermoelectric Materials: Current Status and Future Challenges." Frontiers in Electronic Materials vol. 1, 677845-677845.
  • Dal Poggetto VF, Bosia F, Miniaci M and Pugno NM (2021). "Optimization of spider web-inspired phononic crystals to achieve tailored dispersion for diverse objectives." Materials and Design vol. 209
  • Megone W, Kong D, Peng L and Gautrot JE (2021). "Extreme reversal in mechanical anisotropy in liquid-liquid interfaces reinforced with self-assembled protein nanosheets." Journal of Colloid and Interface Science vol. 594, 650-657.
  • Zhu J, Xu J, Zhang P, Meng X, Cao S, Wu J, Wei M, Shi Y, Reece MJ and Gao F (2021). "Enhanced mechanical and thermal properties of ferroelastic high-entropy rare-earth-niobates." Scripta Materialia vol. 200
  • Zhang Z, Said S, Smith K, Zhang YS, He G, Jervis R, Shearing PR, Miller TS and Brett DJL (2021). "Dendrite suppression by anode polishing in zinc-ion batteries." Journal of Materials Chemistry A vol. 9 (27), 15355-15362.
  • Vieira EMF, Silva JPB, Veltruská K, Istrate CM, Lenzi V, Trifiletti V, Lorenzi B, Matolín V, Ghica C, Marques L, Fenwick O and Goncalves LM (2021). "All-Oxide p-n Junction Thermoelectric Generator Based on SnOx and ZnO Thin Films." Acs Appl Mater Interfaces
  • Wan K, Liu Y, Santagiuliana G, Barandun G, Taroni Junior P, Güder F, Bastiaansen CWM, Baxendale M, Fenwick O, Papageorgiou DG, Krause S, Zhang H and Bilotti E (2021). "Self-powered ultrasensitive and highly stretchable temperature–strain sensing composite yarns." Materials Horizons
  • Nisticò R, Lavagna L, Boot EA, Ivanchenko P, Lorusso M, Bosia F, Pugno NM, D'Angelo D and Pavese M (2021). "Improving rubber concrete strength and toughness by plasma-induced end-of-life tire rubber surface modification." Plasma Processes and Polymers
  • Du T, Ratnasingham SR, Kosasih FU, Macdonald TJ, Mohan L, Augurio A, Ahli H, Lin CT, Xu S, Xu W, Binions R, Ducati C, Durrant JR, Briscoe J and McLachlan MA (2021). "Aerosol Assisted Solvent Treatment: A Universal Method for Performance and Stability Enhancements in Perovskite Solar Cells." Advanced Energy Materials
  • Degousée T, Untilova V, Vijaykumar V, Xu X, Sun Y, Palma M, Brinkmann M, Biniek L and Fenwick O (2021). "High thermal conductivity states and enhanced figure of merit in aligned polymer thermoelectric materials." Journal of Materials Chemistry A
  • Ambekar RS, Kushwaha B, Sharma P, Bosia F, Fraldi M, Pugno NM and Tiwary CS (2021). "Topologically engineered 3D printed architectures with superior mechanical strength." Materials Today vol. 48, 72-94.
  • Vladislavova L, Smolorz T, Orlovskaya N, Lugovy M, Reece MJ, Köbel S, Kopia A, Makowska M, Graule T and Blugan G (2021). "Strength analysis and stress-strain deformation behavior of 3 mol% y-tzp and 21 wt.% al2 o3-3 mol% y-tzp." Materials vol. 14 (14)
  • Dawood AB, Fras J, Aljaber F, Mintz Y, Arezzo A, Godaba H and Althoefer K (2021). "Fusing dexterity and perception for soft robot-assisted minimally invasive surgery: What we learnt from stiff-flop." Applied Sciences (Switzerland) vol. 11 (14)
  • Zhang B, Yin J, Wang Y, Yu D, Liu H, Liu X, Reece MJ and Huang Z (2021). "Low temperature densification mechanism and properties of Ta1-xHfxC solid solutions with decarbonization and phase transition of Cr3C2." Journal of Materiomics vol. 7 (4), 672-682.
  • Lugovy M, Verbylo D, Orlovskaya N, Reece M, Kuebler J, Graule T and Blugan G (2021). "Effect of loading and heating history on deformation of lacoo3." Materials vol. 14 (13)
  • Tarakanchikova YV, Linnik DS, Mashel T, Muslimov AR, Pavlov S, Lepik KV, Zyuzin MV, Sukhorukov GB and Timin AS (2021). "Boosting transfection efficiency: A systematic study using layer-by-layer based gene delivery platform." Materials Science and Engineering C vol. 126
  • Tan W and Falzon BG (2021). "A crystal plasticity phenomenological model to capture the non-linear shear response of carbon fibre reinforced composites." International Journal of Lightweight Materials and Manufacture vol. 4 (1), 99-109.
  • Morvaridi M, Carta G, Bosia F, Gliozzi AS, Pugno NM, Misseroni D and Brun M (2021). "Hierarchical auxetic and isotropic porous medium with extremely negative Poisson's ratio." Extreme Mechanics Letters vol. 48
  • Dong J, Pouchly V, Biesuz M, Tyrpekl V, Vilémová M, Kermani M, Reece M, Hu C and Grasso S (2021). "Thermally-insulated ultra-fast high temperature sintering (UHS) of zirconia: A master sintering curve analysis." Elsevier Scripta Materialia vol. 203
  • Haas PA, Goldstein RE, Cholakova D, Denkov N and Smoukov SK (2021). "Comment on faceting and Flattening of Emulsion Droplets: A Mechanical Model." Physical Review Letters vol. 126 (25)
  • Yin X, Li Q, Wang H, Yang W, Zhou X, Zhang H and Lyu W (2021). "Enhancing the reinforcing efficiency in CNT nanocompositesviathe development of pyrene-based active dispersants." Rsc Advances vol. 11 (39), 23892-23900.
  • Wilson RL, Macdonald TJ, Lin CT, Xu S, Taylor A, Knapp CE, Guldin S, McLachlan MA, Carmalt CJ and Blackman CS (2021). "Chemical vapour deposition (CVD) of nickel oxide using the novel nickel dialkylaminoalkoxide precursor [Ni(dmamp′)2] (dmamp′ = 2-dimethylamino-2-methyl-1-propanolate)." Rsc Advances vol. 11 (36), 22199-22205.
  • Pugno NM, Provis JL, Dai L, Pegoretti A, Cannillo V and Li W (2021). "Editorial: Covid-19: Materials Science and Engineering Challenges." Frontiers in Materials vol. 8
  • Isotta E, Syafiq U, Ataollahi N, Chiappini A, Malerba C, Luong S, Trifiletti V, Fenwick O, Pugno NM and Scardi P (2021). "Erratum: Thermoelectric properties of CZTS thin films: effect of Cu-Zn disorder (Physical Chemistry Chemical Physics (2021) DOI: 10.1039/d1cp01327k)." Physical Chemistry Chemical Physics vol. 23 (25), 14109-14109.
  • Karakashev SI, Smoukov SK, Raykundaliya N and Grozev NA (2021). "Duality of foam stabilization." Colloids and Surfaces a: Physicochemical and Engineering Aspects vol. 619
  • Javed H, Saunders T, Reece MJ, Zanchi E, Sabato AG, Boccaccini AR and Smeacetto F (2021). "Pressure assisted flash sintering of Mn-Co based spinel coatings for solid oxide electrolysis cells (SOECs)." Ceramics International vol. 47 (12), 17804-17808.
  • Chang L, Yan H, Chang J and Gautrot JE (2021). "Cationic Polymer Brush-Coated Bioglass Nanoparticles for the Design of Bioresorbable RNA Delivery Vectors." Elsevier European Polymer Journal, 110593-110593.
  • Elphick M (2021). "The Mutable Collagenous Tissue of Echinoderms: From Biology to Biomedical Applications." Royal Society of Chemistry Soft Matter For Biomedical Applications
  • Chen L, Ghilardi M, Busfield JJC and Carpi F (2021). "Electrically Tunable Lenses: A Review." Frontiers Media Sa Frontiers in Robotics and Ai vol. 8
  • Krasnok A, Vellucci S, Miniaci M, Kherraz N, Croënne C, Mazzotti M, Morvaridi M, Gliozzi AS, Onorato M, Bosia F and Pugno NM (2021). "Hierarchical large-scale elastic metamaterials for passive seismic wave mitigation." Epj Applied Metamaterials vol. 8
  • Mehanna YA, Sadler E, Upton RL, Kempchinsky AG, Lu Y and Crick CR (2021). "The challenges, achievements and applications of submersible superhydrophobic materials." Chemical Society Reviews vol. 50 (11), 6569-6612.
  • Frediani G, Boys H, Ghilardi M, Poslad S, Busfield JJC and Carpi F (2021). "A Soft Touch: Wearable Tactile Display of Softness Made of Electroactive Elastomers." Advanced Materials Technologies
  • Isotta E, Syafiq U, Ataollahi N, Chiappini A, Malerba C, Luong S, Trifiletti V, Fenwick O, Pugno NM and Scardi P (2021). "Thermoelectric properties of CZTS thin films: effect of Cu-Zn disorder." Phys Chem Chem Phys
  • Zhang J, Zhao J, Zhou Y, Wang Y, Blankenagle K, Wang X, Tabassum M and Su L (2021). "Polarization-Sensitive Photodetector Using Patterned Perovskite Single-Crystalline Thin Films." Wiley Advanced Optical Materials
  • Deng X, Hasan A, Elsharkawy S, Tejeda-Montes E, Tarakina NV, Greco G, Nikulina E, Stormonth-Darling JM, Convery N, Rodriguez-Cabello JC, Boyde A, Gadegaard N, Pugno NM, Al-Jawad M and Mata A (2021). "Topographically guided hierarchical mineralization." Materials Today Bio vol. 11
  • Yu C, Viola G, Zhang D, Stroscio Z, Hu Z, Eskilla VR, Grasso S, Wilson RM, Zhou K, Bonini N, Fortes AD, Abrahams I and Yan H (2021). "Structural Evolution in BiNbO4." American Chemical Society Inorganic Chemistry: Including Bioinorganic Chemistry
  • Xi L, Barbieri E, Wang P, Wu W and Gupta H (2021). "Separating effects of bone-quality changes at multiple scales in steroid-induced osteoporosis: Combining multiscale experimental and modelling approaches." Mechanics of Materials vol. 157
  • Yu D, Yin J, Zhang B, Liu X, Reece MJ, Liu W and Huang Z (2021). "Pressureless sintering and properties of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics: The effect of pyrolytic carbon." Journal of The European Ceramic Society vol. 41 (6), 3823-3831.
  • Brewitt NP, Spowage AC and Mustapha KB (2021). "Failure investigation of a fractured vent line." Engineering Failure Analysis vol. 124
  • Kermani M, Dong J, Biesuz M, Linx Y, Deng H, Sglavo VM, Reece MJ, Hu C and Grasso S (2021). "Ultrafast high-temperature sintering (UHS) of fine grained α-Al2O3." Elsevier Journal of The European Ceramic Society vol. 41 (13), 6626-6633.
  • Pang X, Li W, Chang L, Gautrot JE, Wang W and Azevedo HS (2021). "Hyaluronan (HA) Immobilized on Surfaces via Self-Assembled Monolayers of HA-Binding Peptide Modulates Endothelial Cell Spreading and Migration through Focal Adhesion." American Chemical Society Acs Applied Materials and Interfaces vol. 13 (22), 25792-25804.
  • Pugno NM, Motta A and Kaplan D (2021). "Editorial: Frontiers in Silk Science and Technology." Frontiers in Materials vol. 8
  • Ding D, Lanzetta L, Liang X, Min G, Giza M, Macdonald TJ and Haque SA (2021). "Ultrathin polymethylmethacrylate interlayers boost performance of hybrid tin halide perovskite solar cells." Chemical Communications vol. 57 (41), 5047-5050.
  • Burrows SA, Korotkin I, Smoukov SK, Boek E and Karabasov S (2021). "Benchmarking of Molecular Dynamics Force Fields for Solid-Liquid and Solid-Solid Phase Transitions in Alkanes." Journal of Physical Chemistry B vol. 125 (19), 5145-5159.
  • Krushynska AO, Gliozzi AS, Fina A, Krushinsky D, Battegazzore D, Badillo-Ávila MA, Acuautla M, Stassi S, Noè C, Pugno NM and Bosia F (2021). "Dissipative Dynamics of Polymer Phononic Materials." Advanced Functional Materials vol. 31 (30)
  • Zhou B, Das A, Zhong M, Guo Q, Zhang DW, Hing KA, Sobrido AJ, Titirici MM and Krause S (2021). "Photoelectrochemical imaging system with high spatiotemporal resolution for visualizing dynamic cellular responses." Biosensors and Bioelectronics vol. 180
  • Cheng K, Xiong W, Li Y, Tang D, Geng H, Sun M, Hao L, Wang HS and Zhang H (2021). "In-situ deposition of diamond on functionally graded copper scaffold for improved thermal conductivity and mechanical properties." Materials Letters vol. 299
  • Kansara H, Koh G, Varghese M, Luk JZX, Gomez EF, Kumar S, Zhang H, Martínez-Pañeda E and Tan W (2021). "Data-driven modelling of scalable spinodoid structures for energy absorption." Ukacm Conference Proceeding 2021

  • Dal Poggetto VF, Bosia F, Miniaci M and Pugno NM (2021). "Band gap enhancement in periodic frames using hierarchical structures." International Journal of Solids and Structures vol. 216, 68-82.
  • Palumbo S, Carotenuto AR, Cutolo A, Deseri L, Pugno N and Fraldi M (2021). "Mechanotropism of single cells adhering to elastic substrates subject to exogenous forces." Journal of The Mechanics and Physics of Solids vol. 153
  • Liu M, Hui JH, Kinloch IA, Young RJ and Papageorgiou DG (2021). "Deformation and tearing of graphene-reinforced elastomer nanocomposites." Elsevier Composites Communications vol. 25
  • Berardo A, Pantano MF and Pugno NM (2021). "An insight into the toughness modulus enhancement of highperformance knotted microfibers through the correspondence analysis." Engineering Research Express vol. 3 (2)
  • Sun YW, Papageorgiou D, Puech P, Proctor JE, Machon D, Bousige C, San-Miguel A, Humphreys C and Dunstan DJ (2021). "Mechanical Properties of Graphene." Aip Publishing Applied Physics Reviews
  • Fraldi M, Cutolo A, Carotenuto AR, Palumbo S and Pugno N (2021). "A lesson from earthquake engineering for selectively damaging cancer cell structures." Elsevier Journal of The Mechanical Behavior of Biomedical Materials vol. 119
  • Butt MTZ, Hussain SZ, Li X, Briscoe J and Rehman HU (2021). "Ambient Air-Stable CH3NH3PbI3Perovskite Solar Cells Using Dibutylethanolamine as a Morphology Controller." American Chemical Society Acs Applied Energy Materials
  • Schütt F, Rasch F, Deka N, Reimers A, Saure LM, Kaps S, Rank J, Carstensen J, Kumar Mishra Y, Misseroni D, Romani Vázquez A, Lohe MR, Shaygan Nia A, Pugno NM, Feng X and Adelung R (2021). "Electrically powered repeatable air explosions using microtubular graphene assemblies." Materials Today
  • Li X, Tu Y, Pace S, Anselmi-Tamburini U and Briscoe J (2021). "Influence of ZnO nanorod surface chemistry on passivation effect of TiO2shell coating." Journal of Physics D: Applied Physics vol. 54 (25)
  • Greco G, Arndt T, Schmuck B, Francis J, Bäcklund FG, Shilkova O, Barth A, Gonska N, Seisenbaeva G, Kessler V, Johansson J, Pugno NM and Rising A (2021). "Tyrosine residues mediate supercontraction in biomimetic spider silk." Communications Materials vol. 2 (1), 43-43.
  • Biesuz M, Saunders T, Ke D, Reece MJ, Hu C and Grasso S (2021). "A review of electromagnetic processing of materials (EPM): Heating, sintering, joining and forming." Journal of Materials Science and Technology vol. 69, 239-272.
  • Falco PD, Weinkamer R, Wagermaier W, Li C, Snow T, Terrill NJ, Gupta HS, Goyal P, Stoll M, Benner P and Fratzl P (2021). "Tomographic X-ray scattering based on invariant reconstruction: Analysis of the 3D nanostructure of bovine bone." Journal of Applied Crystallography vol. 54, 486-497.
  • Zhu J, Meng X, Zhang P, Li Z, Xu J, Reece MJ and Gao F (2021). "Dual-phase rare-earth-zirconate high-entropy ceramics with glass-like thermal conductivity." Journal of The European Ceramic Society vol. 41 (4), 2861-2869.
  • Greco G, Mastellari V, Holland C and Pugno NM (2021). "Comparing modern and classical perspectives on spider silks and webs." Massachusetts Institute of Technology Press (Mit Press) Perspectives On Science: Historical, Philosophical, Social vol. 29 (2), 133-156.
  • Papageorgiou DG, Tsetsou I, Ioannidis RO, Nikolaidis GN, Exarhopoulos S, Kasmi N, Bikiaris DN, Achilias DS and Papageorgiou GZ (2021). "A new era in engineering plastics: Compatibility and perspectives of sustainable alipharomatic poly(ethylene terephthalate)/poly(ethylene 2,5-furandicarboxylate) blends." Mdpi Polymers vol. 13 (7)
  • Obadina OO, Thaha MA, Althoefer K and Shaheed MH (2021). "Dynamic characterization of a master–slave robotic manipulator using a hybrid grey wolf–whale optimization algorithm." Sage Publications Journal of Vibration and Control, 10775463211-10775463211.
  • Kherraz N, Radzieński M, Mazzotti M, Kudela P, Bosia F, Gliozzi AS, Misseroni D, Pugno NM, Ostachowicz W and Miniaci M (2021). "Experimental full wavefield reconstruction and band diagram analysis in a single-phase phononic plate with internal resonators." Journal of Sound and Vibration vol. 503
  • Pantano MF, Pavlou C, Carbone MGP, Galiotis C, Pugno NM and Speranza G (2021). "Highly deformable, ultrathin large-area poly(methyl methacrylate) films." Acs Omega
  • Zhang L, Yan Z, Chen T, Luo H, Zhang H, Khanom T, Zhang D, Abrahams I and Yan H (2021). "Tunable phase transitions in NaNbO3ceramics through bismuth/vacancy modification." Royal Society of Chemistry Journal of Materials Chemistry C vol. 9 (12), 4289-4299.
  • Meng X, Xu J, Zhu J, Zhang P, Rydosz A, Reece MJ and Gao F (2021). "Pyrochlore-fluorite dual-phase high-entropy ceramic foams with extremely low thermal conductivity from particle-stabilized suspension." Scripta Materialia vol. 194
  • Shi Z, Zhang P, Lou Z, Qin M, Xu J, Yan H and Gao F (2021). "Grain orientation evolution and thermoelectric properties of textured (Ca0.87Ag0.1La0.03)3Co4O9 ceramics prepared by tape casting." Ceramics International vol. 47 (6), 8365-8374.
  • Song F, Gao H, Li D, Petrov AV, Petrov VV, Wen D and Sukhorukov GB (2021). "Low intensity focused ultrasound responsive microcapsules for non-ablative ultrafast intracellular release of small molecules." Journal of Materials Chemistry B vol. 9 (10), 2384-2393.
  • Bhatti MRA, Bilotti E, Peijs T and Bastiaansen CWM (2021). "Photo-Actuation Stress of Ultra-Drawn Chain-Extended Polyethylene." American Chemical Society Acs Applied Polymer Materials
  • Yakovleva AA, Movchan IB, Misseroni D, Pugno NM and Movchan AB (2021). "Multi-Physics of Dynamic Elastic Metamaterials and Earthquake Systems." Frontiers in Materials vol. 7
  • Gspann TS, Kaniyoor A, Tan W, Kloza PA, Bulmer JS, Mizen J, Divitini G, Terrones J, Tune D, Cook JD, Smail FR and Elliott JA (2021). "Catalyst-Mediated Enhancement of Carbon Nanotube Textiles by Laser Irradiation: Nanoparticle Sweating and Bundle Alignment." Mdpi Ag Catalysts vol. 11 (3), 368-368.
  • Zhang M, Chen Z, Yue Y, Chen T, Yan Z, Jiang Q, Yang B, Eriksson M, Tang J, Zhang D, Shen Z, Abrahams I and Yan H (2021). "Terahertz Reading of Ferroelectric Domain Wall Dielectric Switching." American Chemical Society (Acs) Acs Applied Materials & Interfaces
  • Tao X, Stuart BW, Wan K, Murray JW, Bilotti E and Assender HE (2021). "Static and Dynamic Postannealing Strategies for Roll-to-Roll Fabrication of DC Magnetron Sputtered Bismuth Telluride Thin Films onto Polymer Webs." Acs Applied Materials and Interfaces vol. 13 (8), 10149-10160.
  • He Q, Li X, Zhang J, Zhang H and Briscoe J (2021). "P–N junction-based ZnO wearable textile nanogenerator for biomechanical energy harvesting." Nano Energy vol. 85
  • Marques L, Murphy R, Althoefer K, Tadokoro S and Laschi C (2021). "Robotics Responds to the COVID-19 Outbreak [From the Guest Editors]." Ieee Robotics and Automation Magazine vol. 28 (1), 16-17.
  • Wang Y and Reece MJ (2021). "Oxidation resistance of (Hf-Ta-Zr-Nb)C high entropy carbide powders compared with the component monocarbides and binary carbide powders." Scripta Materialia vol. 193, 86-90.
  • Sun YW, Holec D, Gehringer D, Fenwick O, Dunstan DJ and Humphreys CJ (2021). "Erratum: Unexpected softness of bilayer graphene and softening of A-A stacked graphene layers [Phys. Rev. B 101, 125421 (2020)]." Physical Review B vol. 103 (11), 119901-119901.
  • Zharkov MN, Brodovskaya EP, Kulikov OA, Gromova EV, Ageev VP, Atanova AV, Kozyreva ZV, Tishin AM, Pyatakov AP, Pyataev NA and Sukhorukov GB (2021). "Enhanced cytotoxicity caused by AC magnetic field for polymer microcapsules containing packed magnetic nanoparticles." Colloids and Surfaces B: Biointerfaces vol. 199
  • Li Y, Meng X, Chen Q, Zhu J, Xu J, Reece MJ and Gao F (2021). "Electronic structure and thermal properties of Sm3+-doped La2Zr2O7: First-principles calculations and experimental study." Journal of The American Ceramic Society vol. 104 (3), 1475-1488.
  • Yavari M, Liu X, Webb T, Jayawardena KDGI, Xiang Y, Kern S, Hinder S, MacDonald TJ, Silva SRP, Sweeney SJ and Zhang W (2021). "A synergistic Cs2CO3ETL treatment to incorporate Cs cation into perovskite solar cells: Via two-step scalable fabrication." Journal of Materials Chemistry C vol. 9 (12), 4367-4377.
  • Fan P, Ruddlesden M, Wang Y, Zhao L, Lu C and Su L (2021). "Learning Enabled Continuous Transmission of Spatially Distributed Information through Multimode Fibers." Wiley-Vch Verlag Laser and Photonics Reviews
  • Qu F, Ma X and Gautrot JE (2021). "Precise positioning of enzymes within hierarchical polymer nanostructures for switchable bioelectrocatalysis." Elsevier Biosensors and Bioelectronics vol. 179, 113045-113045.
  • Bucciarelli A, Greco G, Corridori I, Pugno NM and Motta A (2021). "A Design of Experiment Rational Optimization of the Degumming Process and Its Impact on the Silk Fibroin Properties." Acs Biomaterials Science and Engineering vol. 7 (4), 1374-1393.
  • Cutolo A, Carotenuto AR, Palumbo S, Bosia F, Pugno NM and Fraldi M (2021). "Unveiling a new shear stress transfer mechanism in composites with helically wound hierarchical fibres." International Journal of Mechanical Sciences vol. 192
  • Chen J, Miao P, Lin EE, Bai T, Smoukov SK and Kong J (2021). "Enhanced microwave absorption performance of light weight N-doped carbon nanoparticles." Rsc Advances vol. 11 (14), 7954-7960.
  • Chen H, Xu Y, Qian S, Chen C, Guo J and Su L (2021). "Distributed Fiber-Optic Ultrasonic Sensor Applied in Detection of Discharging Fault of Power Cable Joint." Guangxue Xuebao/Acta Optica Sinica vol. 41 (3)
  • Baláž P, Achimovičová M, Baláž M, Chen K, Dobrozhan O, Guilmeau E, Hejtmánek J, Knížek K, Kubíčková L, Levinský P, Puchý V, Reece MJ, Varga P and Zhang R (2021). "Thermoelectric Cu-S-Based Materials Synthesized via a Scalable Mechanochemical Process." Acs Sustainable Chemistry and Engineering vol. 9 (5), 2003-2016.
  • Santi S, Mancini I, Dirè S, Callone E, Speranza G, Pugno N, Migliaresi C and Motta A (2021). "A Bio-inspired Multifunctionalized Silk Fibroin." Acs Biomaterials Science and Engineering vol. 7 (2), 507-516.
  • RATNASINGHAM SR, Mohan L, Dabaczi M, Degousee T, Binions R, Fenwick O, Kim J-S, McLachlan M and Briscoe J (2021). "Novel scalable aerosol-assisted CVD route for perovskite solar cells." Royal Society of Chemistry Materials Advances
  • Kundanati L, Das P and Pugno NM (2021). "Prey capturing dynamics and nanomechanically graded cutting apparatus of dragonfly nymph." Materials vol. 14 (3), 1-13.
  • Santi S, Corridori I, Pugno NM, Motta A and Migliaresi C (2021). "Injectable Scaffold-Systems for the Regeneration of Spinal Cord: Advances of the Past Decade." Acs Biomaterials Science and Engineering vol. 7 (3), 983-999.
  • Greco G and Pugno NM (2021). "How spiders hunt heavy prey: The tangle web as a pulley and spider's lifting mechanics observed and quantified in the laboratory." Journal of The Royal Society Interface vol. 18 (175)
  • Piorkowski D, Liao CP, Joel AC, Wu CL, Doran N, Blamires SJ, Pugno NM and Tso IM (2021). "Adhesion of spider cribellate silk enhanced in high humidity by mechanical plasticization of the underlying fiber." Journal of The Mechanical Behavior of Biomedical Materials vol. 114
  • Xi L, Zhang Y, Gupta H, Terrill N, Wang P, Zhao T and Fang D (2021). "A multiscale study of structural and compositional changes in a natural nanocomposite: Osteoporotic bone with chronic endogenous steroid excess." Bone vol. 143
  • Decavoli C, Boldrini CL, Trifiletti V, Luong S, Fenwick O, Manfredi N and Abbotto A (2021). "Dye-catalyst dyads for photoelectrochemical water oxidation based on metal-free sensitizers." Rsc Advances vol. 11 (10), 5311-5319.
  • Sgouros AP, Androulidakis C, Tsoukleri G, Kalosakas G, Delikoukos N, Signetti S, Pugno NM, Parthenios J, Galiotis C and Papagelis K (2021). "Efficient Mechanical Stress Transfer in Multilayer Graphene with a Ladder-like Architecture." Acs Applied Materials and Interfaces vol. 13 (3), 4473-4484.
  • Tripathi M, Lee F, Michail A, Anestopoulos D, McHugh JG, Ogilvie SP, Large MJ, Graf AA, Lynch PJ, Parthenios J, Papagelis K, Roy S, Saadi MASR, Rahman MM, Pugno NM, King AAK, Ajayan PM and Dalton AB (2021). "Structural Defects Modulate Electronic and Nanomechanical Properties of 2D Materials." Acs Nano vol. 15 (2), 2520-2531.
  • Yan Z, Zhang D, Zhou X, Zhang M, Zhang L, Zhang H, Xue G, Abrahams I and Yan H (2021). "Investigation of transitions between the M-phases in AgNbO 3 based ceramics." Royal Society of Chemistry Journal of Materials Chemistry A
  • Cozens EJ, Roohpour N and Gautrot JE (2021). "Comparative Adhesion of Chemically and Physically Crosslinked Poly(Acrylic Acid)-Based Hydrogels to Soft Tissues." Elsevier European Polymer Journal, 110250-110250.
  • Jalali SK, Beigrezaee MJ and Pugno NM (2021). "Is it always worthwhile to resolve the governing equations of plate theories for graded porosity along the thickness?" Composite Structures vol. 256
  • Chen K, Nuttall C, Stefanaki E, Placha K, Tuley R, Simpson K, Bos JWG and Reece MJ (2021). "Fast synthesis of n-type half-heusler TiNiSn thermoelectric material." Scripta Materialia vol. 191, 71-75.
  • Mahajan A, Zhang H, Wu J, Venkata Ramana E, Yu C, Tarakina NV, Reece MJ and Yan H (2021). "Effect of processing on the structures and properties of bismuth sodium titanate compounds." Springer Journal of Materials Research, 1-11.
  • Lu Y (2021). "A coating-free superhydrophobic sensing material for full-range human motion and microliter droplet impact detection." Elsevier Chemical Engineering Journal
  • Hufton J, Harding J, Smith T and Romero-González ME (2021). "The importance of the bacterial cell wall in uranium(VI) biosorption." Phys Chem Chem Phys
  • Zhang M, Xu X, Yue Y, Palma M, Reece MJ and Yan H (2021). "Multi elements substituted Aurivillius phase relaxor ferroelectrics using high entropy design concept." Elsevier Materials and Design, 109447-109447.
  • Zhu J, Meng X, Xu J, Zhang P, Lou Z, Reece MJ and Gao F (2021). "Ultra-low thermal conductivity and enhanced mechanical properties of high-entropy rare earth niobates (RE3NbO7, RE = Dy, Y, Ho, Er, Yb)." Journal of The European Ceramic Society vol. 41 (1), 1052-1057.
  • Klayya S, Tawichai N, Intatha U, Zhang H, Bilotti E and Soykeabkaew N (2021). "Tailoring nanofibrillated cellulose through sonication and its potential use in molded pulp packaging." Nanocomposites vol. 7 (1), 109-122.
  • Zambon A, Bourdoux S, Pantano MF, Pugno NM, Boldrin F, Hofland G, Rajkovic A, Devlieghere F and Spilimbergo S (2021). "Supercritical CO2 for the drying and microbial inactivation of apple’s slices." Drying Technology vol. 39 (2), 259-267.
  • Fakharuddin A, Vasilopoulou M, Soultati A, Haider MI, Briscoe J, Fotopoulos V, Di Girolamo D, Davazoglou D, Chroneos A, Yusoff ARBM, Abate A, Schmidt-Mende L and Nazeeruddin MK (2021). "Robust Inorganic Hole Transport Materials for Organic and Perovskite Solar Cells: Insights into Materials Electronic Properties and Device Performance." Solar Rrl vol. 5 (1)
  • Qin M, Gao F, Cizek J, Yang S, Fan X, Zhao L, Xu J, Dong G, Reece M and Yan H (2021). "Response to comment on “point defect structure of La-doped SrTiO3 ceramics with colossal permittivity”." Scripta Materialia vol. 190, 118-120.
  • Zhang X, Shi X, Gautrot JE and Peijs T (2021). "Nanoengineered electrospun fibers and their biomedical applications: a review." Nanocomposites vol. 7 (1), 1-34.
  • DebRoy T and Bhadeshia HKDH (2021). "Innovations in Everyday Engineering Materials."
  • Megone W, Tang P, Roohpour N and Gautrot JE (2021). "Impact of the molecular structure of cationic binders on the rheological and adhesive properties of carboxymethyl cellulose-based coacervate hydrogels." Arkivoc vol. 2021 (6)
  • Fraldi M, Palumbo S, Carotenuto AR, Cutolo A and Pugno NM (2021). "Generalized multiple peeling theory uploading hyperelasticity and pre-stress." Extreme Mechanics Letters vol. 42
  • Sharma SK, Fides M, Hvizdoš P, Reece MJ and Grasso S (2021). "Flash Spark Plasma Sintering of SiC: Impact of Additives." Silicon
  • Wang Y, Zhang M, Wu J, Hu Z, Zhang H and Yan H (2021). "Ferroelectric and photocatalytic properties of Aurivillius phase Ca2Bi4Ti5O18." Journal of The American Ceramic Society vol. 104 (1), 322-328.
  • Lin CT, Xu W, Macdonald TJ, Ngiam J, Kim JH, Du T, Xu S, Tuladhar PS, Kang H, Lee K, Durrant JR and Mclachlan MA (2021). "Correlating the Active Layer Structure and Composition with the Device Performance and Lifetime of Amino-Acid-Modified Perovskite Solar Cells." Acs Applied Materials and Interfaces
  • Zhang Y, Kirs A, Ambroz F, Lin CT, Bati ASR, Parkin IP, Shapter JG, Batmunkh M and Macdonald TJ (2021). "Ambient Fabrication of Organic–Inorganic Hybrid Perovskite Solar Cells." Small Methods vol. 5 (1)
  • Pugno MC, Misseroni D and Pugno NM (2021). "Air-encapsulating elastic mechanism of submerged Taraxacum blowballs." Materials Today Bio vol. 9
  • Fu S, Meng H, Inamdar S, Das B, Gupta H, Wang W, Thompson C and Knight M (2021). "Activation of TRPV4 by mechanical, osmotic or pharmaceutical stimulation is anti-inflammatory blocking IL-1β mediated articular cartilage matrix destruction.", Editors: Block JA. Elsevier Osteoarthritis and Cartilage
  • Reinoso MR, Civera M, Burgio V, Bergamin F, Ruiz OG, Pugno NM and Surace C (2021). "3d printing and testing of rose thorns or limpet teeth inspired anchor device for tendon tissue repair." Acta of Bioengineering and Biomechanics vol. 23 (4)