Centre for Intelligent Transport

Publications

   2024   |   2023   |   2022   |   2021   |   2020   |   2019   |   2018   |   2017   |   2016   |   2015   |   2014   
  • Long T, Li Y and Chen J (2021). Productivity prediction in aircraft final assembly lines: Comparisons and insights in different productivity ranges. Elsevier Journal of Manufacturing Systems vol. 62, 377-389.   
    23-12-2021
  • Shimoda S, Jamone L, Ognibene D, Nagai T, Sciutti A, Costa-Garcia A, Oseki Y and Taniguchi T (2021). What is the role of the next generation of cognitive robotics? Taylor & Francis Advanced Robotics  
    17-12-2021
  • Wen PH, Wen JC, Sladek J and Sladek V (2021). Stress intensity factors and T-stresses for periodic array cracks: 3D static and dynamic. Elsevier Theoretical and Applied Fracture Mechanics vol. 117  
    30-11-2021
  • Liu H, Liu J, Kaboglu C, Zhou J, Kong X, Li S, Blackman BRK, Kinloch AJ and Dear JP (2021). Modelling the quasi-static flexural behaviour of composite sandwich structures with uniform- and graded-density foam cores. Elsevier Engineering Fracture Mechanics vol. 259, 108121-108121.   
    20-11-2021
  • Xinjian L, Ivan K, Zhonghao R and Karabasov S (2021). A thermostat-consistent fully coupled molecular dynamics – generalised fluctuating hydrodynamics model for non-equilibrium flows. Wiley-Blackwell Advanced Theory and Simulations  
    20-11-2021
  • Avital E and Miloh T (2021). Self-thermophoresis of Laser-heated spherical Janus particles. Edp Sciences The European Physical Journal E: Soft Matter and Biological Physics vol. 44, 139-1-139-13.   
    17-11-2021
  • Di Y, Zhao L, Mao J and Avital E (2021). A resolved CFD-DEM-IBM algorithm for water entry problems. Elsevier Ocean Engineering vol. 240, 110014-110014.   
    15-11-2021
  • Paykani A, Garcia A, Shahbakhti M, Rahnama P and Reitz RD (2021). Reactivity controlled compression ignition engine: Pathways towards commercial viability. Elsevier Applied Energy vol. 282  
    14-11-2021
  • Gryazev V, Markesteijn A and Karabasov S (2021). Generalised Acoustic Analogy Modelling of Hot Jet Noise. American Institute of Aeronautics and Astronautics Aiaa Journal: Devoted to Aerospace Research and Development  
    11-11-2021
  • Slavchov R, Peychev B and Ismail A (2021). Characterization of capillary waves: a review and a new optical method. Aip Publishing Physics of Fluids vol. 33 (10)  
    29-10-2021
  • Lacassagne T, Boulafentis T, Cagney N and Balabani S (2021). Modulation of elasto-inertial transitions in Taylor–Couette flow by small particles. Journal of Fluid Mechanics vol. 929, r2-r2.   
    27-10-2021
  • Koliolios E, Mills DG, Busfield JJC and Tan W (2021). The Nail Penetration Behaviour of Carbon Nanotube Composite Electrodes for Energy Storage. Frontiers Media Frontiers in Materials vol. 8, 741541-741541.   
    21-10-2021
  • Cheng Z-Q, Xiong J-J and Tan W (2021). Fatigue Crack Growth and Life Prediction of 7075-T62 Aluminium-alloy Thin-sheets with Low-velocity Impact Damage under Block Spectrum Loading. Elsevier International Journal of Fatigue, 106618-106618.   
    21-10-2021
  • Kyei-Manu WA, Tunnicliffe LB, Plagge J, Herd CR, Akutagawa K, Pugno NM and Busfield JJC (2021). Thermomechanical Characterization of Carbon Black Reinforced Rubbers During Rapid Adiabatic Straining. Frontiers in Materials vol. 8, 743146-743146.   
    15-10-2021
  • Yanes E, Pugno NM, Ramier J, Berryhill B and Busfield JJC (2021). Characterising the friction coefficient between rubber O-rings and a rigid surface under extreme pressures. Polymer Testing, 107378-107378.   
    12-10-2021
  • Wang X, Brownlee AEI, Weiszer M, Woodward J, Mahfouf M and Chen J (2021). A chance-constrained programming model for airport ground movement optimisation with taxi time uncertainties. Elsevier Transportation Research Part C: Emerging Technologies  
    07-10-2021
  • Vitanov I, Farkhatdinov I, Denoun B, Palermo F, Otaran A, Brown J, Omarali B, Abrar T, Hansard M, Oh C, Poslad S, Liu C, Godaba H, Zhang K, Jamone L and Althoefer K (2021). A Suite of Robotic Solutions for Nuclear Waste Decommissioning. Robotics vol. 10 (4), 112-112.   
    07-10-2021
  • Zhang X, Xiang D, Wu Y, Harkin-Jones E, Shen J, Ye Y, Tan W, Wang J, Wang P, Zhao C and Li Y (2021). High-Performance Flexible Strain Sensors Based on Biaxially Stretched Conductive Polymer Composites with Carbon Nanotubes Immobilized on Reduced Graphene Oxide. Elsevier Composites Part a: Applied Science and Manufacturing, 106665-106665.   
    04-10-2021
  • Ragab R, Parker J, Li M, Liu T and Sun W (2021). Creep crack growth modelling of Grade 91 vessel weldments using a modified ductility based damage model. Elsevier European Journal of Mechanics - a/Solids vol. 91  
    25-09-2021
  • Li B, Du W, Zhang Y, Chen J, Tang K and Cao X (2021). A Deep Unsupervised Learning Approach for Airspace Complexity Evaluation. Institute of Electrical and Electronics Engineers Ieee Transactions On Intelligent Transportation Systems  
    08-09-2021
  • Gryazev V, KALYAN A, Markesteijn A and Karabasov S (2021). Broad Band Shock Associated Noise Modelling for High-Area-Ratio Under-Expanded Jets. Nature Research Journal of The Acoustical Society of America  
    30-08-2021
  • Shahdad S, Hindocha A, Patel T, Cagney N, Mueller JD, Koched A, Seoudi N, Morgan C, Fleming PS and Din AR (2021). Fallow time determination in dentistry using aerosol measurement in mechanically and non-mechanically ventilated environments. Springer Nature [Academic Journals On Nature.Com] British Dental Journal (Bdj)  
    24-08-2021
  • Vepa R and Shaheed MH (2021). Optimal Trajectory Synthesis for Spacecraft Asteroid Rendezvous., Editors: Garcia JL and Awrejcewicz J. Mdpi Symmetry  
    02-08-2021
  • Yang JJ, Liu JZ, Sladek J, Sladek V and Wen PH (2021). Stress intensity factors and T-stresses by boundary integral equations: 3D statics. Elsevier Engineering Fracture Mechanics vol. 256  
    31-07-2021
  • Neto M, Ribeiro P, Nunes R, Jamone L, Bernardino A and Cardoso S (2021). A soft tactile sensor based on magnetics and hybrid flexible-rigid electronics. Mdpi Sensors vol. 21 (15)  
    28-07-2021
  • Ai K-M, Wang M-Y, Wang D, Wang H-F, Cao R-J and Avital E (2021). Numerical Study of A Generic Tidal Turbine Using BEM Optimization Methods. Springer Verlag China Ocean Engineering vol. 35 (3), 344-351.   
    24-07-2021
  • Bhuwal AS, Liu T, Ashcroft I and Sun W (2021). Localization and coalescence of imperfect planar FCC truss lattice metamaterials under multiaxial loadings. Elsevier Mechanics of Materials vol. 160  
    17-07-2021
  • Dawood AB, Fras J, Aljaber F, Mintz Y, Arezzo A, Godaba H and Althoefer K (2021). Fusing dexterity and perception for soft robot-assisted minimally invasive surgery: What we learnt from stiff-flop. Mdpi Applied Sciences vol. 11 (14)  
    17-07-2021
  • Bai X, Ji C, Grant P, Phillips N, Oza U, Avital EJ and Williams JJR (2021). Turbulent flow simulation of a single-blade Magnus rotor. Advances in Aerodynamics vol. 3 (1)  
    12-07-2021
  • Jiang P, Zheng H, Xiong J and Wen P (2021). Nonlinear elastic-plastic analysis of reinforced concrete column-steel beam connection by RBF-FD method. Engineering Analysis With Boundary Elements vol. 128, 188-194.   
    01-07-2021
  • Du W, Guo T, Chen J, Li B, Zhu G and Cao X (2021). Cooperative pursuit of unauthorized UAVs in urban airspace via Multi-agent reinforcement learning. Transportation Research Part C: Emerging Technologies vol. 128  
    01-07-2021
  • Tan W and Falzon BG (2021). A crystal plasticity phenomenological model to capture the non-linear shear response of carbon fibre reinforced composites. International Journal of Lightweight Materials and Manufacture vol. 4 (1), 99-109.   
    01-07-2021
  • Wang H, Liu H, Ding Z and Li N (2021). Experimental and constitutive modelling studies of semicrystalline thermoplastics under solid-state stamp forming conditions. Mdpi Polymer vol. 228, 123939-123939.   
    11-06-2021
  • Chen L, Ghilardi M, Busfield JJC and Carpi F (2021). Electrically Tunable Lenses: A Review. Frontiers Media Sa Frontiers in Robotics and Ai vol. 8  
    09-06-2021
  • Huang W, Tang YD, Sladek J, Sladek V and Wen PH (2021). Meshless analysis for cracked shallow shell. Elsevier Engineering Analysis With Boundary Elements vol. 130, 145-160.   
    06-06-2021
  • Frediani G, Boys H, Ghilardi M, Poslad S, Busfield JJC and Carpi F (2021). A Soft Touch: Wearable Tactile Display of Softness Made of Electroactive Elastomers. Advanced Materials Technologies  
    04-06-2021
  • Wen PH, Tang YD, Sladek J and Sladek V (2021). BEM analysis for curved cracks. Engineering Analysis With Boundary Elements vol. 127, 91-101.   
    01-06-2021
  • Liu C, Li B, Li Z, Cao C, Gao X, Zhang K and Chen H (2021). 3D printable and fringe electric field adhesion enabled variable stiffness artificial muscles for semi-active vibration attenuation. Royal Society of Chemistry Soft Matter  
    27-05-2021
  • Vepa R and Kwon JR (2021). Synthesis of an Active Flutter Suppression System in the Transonic Domain using a Computational Model., Editors: Babinsky H, Graham M and Atkins C. Cambridge University Press (Cup) The Aeronautical Journal  
    20-05-2021
  • Paykani A (2021). Comparative study on chemical kinetics mechanisms for methane-based fuel mixtures under engine-relevant conditions. Mdpi Energies vol. 14 (10)  
    14-05-2021
  • Zhang K and Liu C (2021). Design and Analysis of a Novel Reconfigurable Parallel Manipulator with Kirigami-inspired Bennett Plano-Spherical Linkages and Angular Pouch Motors. Journal of Mechanisms and Robotics, 1-23.   
    30-04-2021
  • Saleh ZJ, Avital EJ and Korakianitis T (2021). Effect of in-service burnout effect on the transonic leakage flows over cavity tip model. Sage Publications Proceedings of The Institution of Mechanical Engineers, Part a: Journal of Power and Energy, 09576509211-09576509211.   
    28-04-2021
  • Ismail AS, Goodwin GR, Castrejon-Pita JR, Noyce AJ and Azevedo HS (2021). A novel capsule-based smell test fabricated via coaxial dripping. The Royal Society Journal of The Royal Society Interface vol. 18 (177)  
    28-04-2021
  • Wang M, Avital E, Chen Q, Williams J, Mi S and Xie Q (2021). A Numerical Study on Suspended Sediment Transport in a Partially Vegetated Channel Flow. Journal of Hydrology vol. 599 (6), 126335/1-126335/22.   
    22-04-2021
  • El-Hady B Kashyout A, Hassan A, Hassan G, El-Banna Fath H, El-Wahab Kassem A, Elshimy H, Ranjanvepa and Shaheed MH (2021). Hybrid renewable energy/hybrid desalination potentials for remote areas: Selected cases studied in Egypt. Rsc Advances vol. 11 (22), 13201-13219.   
    08-04-2021
  • Ragab R, Parker J, Li M, Liu T and Sun W (2021). Modelling of a Grade 91 power plant pressurised header weldment under ultra super-critical creep conditions. Elsevier International Journal of Pressure Vessels and Piping vol. 192  
    02-04-2021
  • Beke L, Weiszer M and Chen J (2021). A Comparison of Genetic Representations and Initialisation Methods for the Multi-objective Shortest Path Problem on Multigraphs., Editors: Ekárt A and Esparcia-Alcázar AI. Springer Science and Business Media Llc Sn Computer Science vol. 2 (3)  
    30-03-2021
  • Obadina OO, Thaha MA, Althoefer K and Shaheed MH (2021). Dynamic characterization of a master–slave robotic manipulator using a hybrid grey wolf–whale optimization algorithm. Sage Publications Journal of Vibration and Control, 10775463211-10775463211.   
    27-03-2021
  • Lacassagne T, Cagney N and Balabani S (2021). Shear-thinning mediation of elasto-inertial Taylor-Couette flow. Journal of Fluid Mechanics vol. 915  
    24-03-2021
  • Obajemu O, Mahfouf M, Maiyar LM, Al-Hindi A, Weiszer M and Chen J (2021). Real-Time Four-Dimensional Trajectory Generation Based on Gain-Scheduling Control and a High-Fidelity Aircraft Model. Engineering  
    19-03-2021
  • Gspann TS, Kaniyoor A, Tan W, Kloza PA, Bulmer JS, Mizen J, Divitini G, Terrones J, Tune D, Cook JD, Smail FR and Elliott JA (2021). Catalyst-Mediated Enhancement of Carbon Nanotube Textiles by Laser Irradiation: Nanoparticle Sweating and Bundle Alignment. Mdpi Ag Catalysts vol. 11 (3), 368-368.   
    11-03-2021
  • Yan Y, Avital E, Williams J and Cui J (2021). Aerodynamic performance improvements of a vertical axis wind turbine by leading-edge protuberance. Elsevier Journal of Wind Engineering and Industrial Aerodynamics vol. 211, 104535-104535.   
    08-03-2021
  • Beggs C and Avital E (2021). A psychrometric model to assess the biological decay of the SARS-CoV-2 virus in aerosols. Peerj Inc. Peerj vol. 9, e11024-1-e11024-22.   
    02-03-2021
  • Zheng H, Sladek J, Sladek V, Wang SK and Wen PH (2021). Fracture analysis of functionally graded material by hybrid meshless displacement discontinuity method. Elsevier Engineering Fracture Mechanics vol. 247, 107591-107591.   
    25-02-2021
  • Pan QX, Zheng CC, Lü ST, Qian GP, Zhang JH, Wen PH, Milkos BC and Zhou HD (2021). Field measurement of strain response for typical asphalt pavement. Springer Verlag Journal of Central South University vol. 28 (2), 618-632.   
    18-02-2021
  • Cao S and Liu T (2021). Compressive response of self-healing polymer foams containing bilayered capsules: Coupled healing agents diffusion and stress simulations. Elsevier Journal of The Mechanics and Physics of Solids vol. 149  
    24-01-2021
  • HEFFRON AP, Williams JJR and Avital EJ (2021). Large-Eddy Simulation of Microvortex Generators in a Turbulent Boundary Layer. American Society of Mechanical Engineers Journal of Fluids Engineering vol. 143 (5), 051208-1-051208-12.   
    19-01-2021
  • Luo D, Xiao Y, Hardwick L, Snell R, Way M, Morell XS, Livera F, Ludford N, Panwisawas C, Dong H and Goodall R (2021). High entropy alloys as filler metals for joining. Mdpi Entropy vol. 23 (1), 1-23.   
    07-01-2021
  • Jaafar HI, Mohamed Z, Ahmad MA, Wahab NA, Ramli L and Shaheed M (2021). Control of an Underactuated Double-Pendulum Overhead Crane using Improved Model Reference Command Shaping: Design, Simulation and Experiment. Elsevier Mechanical Systems and Signal Processing vol. 151 (2021)  
    04-01-2021
  • Agromayor R, Anand N, Müller JD, Pini M and Nord LO (2021). A Unified Geometry Parametrization Method for Turbomachinery Blades. Elsevier Cad Computer Aided Design vol. 133  
    02-01-2021