Centre for Intelligent Transport

Publications

   2013   |   2012   |   2011   |   2010   |   2009   |   2008   |   2007   |   2006   |   2005   |   2004   |   2003   
  • Hirahara A, Hino R, Yoshida F and Toropov VV (2008). Numerical optimization of sheet metal forming process using new fracture criterion. International Journal of Modern Physics B vol. 22 (31-32), 5692-5698.  
    30-12-2008
  • Lu T, Liu T and Deng Z (2008). Thermoelastic properties of sandwich materials with pin-reinforced foam cores. Springer Science in China Series E: Technological Sciences vol. 51 (12), 2059-2074.  
    06-12-2008
  • Karabasov SA and Goloviznin VM (2008). Contrasting high-resolution characteristic shock-capturing methods in aeroacoustic test problems. 14th Aiaa/Ceas Aeroacoustics Conference (29th Aiaa Aeroacoustics Conference) 
    01-12-2008
  • Yu G, Wang H, Wen P and Rose JW (2008). An inverse method to determine boundary temperature and heat flux for a 2D steady state heat conduction problem. Proceedings of The Asme Design Engineering Technical Conference vol. 3 (PARTS A AND B), 1087-1093.  
    01-12-2008
  • Jaworski A and Müller JD (2008). Toward modular multigrid design optimisation. Lecture Notes in Computational Science and Engineering vol. 64 LNCSE, 281-291.  
    20-10-2008
  • Song ZB, Seneviratne LD, Althoefer K, Song XJ and Zweiri YH (2008). Slip parameter estimation of a single wheel using a non-linear observer. Cambridge University Press (Cup) Robotica vol. 27 (6), 801-811.  
    09-10-2008
  • Wen PH, Adetoro M and Xu Y (2008). The fundamental solution of Mindlin plates with damping in the Laplace domain and its applications. Eng Anal Bound Elem vol. 32 (10), 870-882.  
    01-10-2008
  • Yu G, Avital EJ and Williams JJR (2008). Large eddy simulation of flow past free surface piercing circular cylinders. Journal of Fluids Engineering, Transactions of The Asme vol. 130 (10), 1013041-1013049.  
    01-10-2008
  • Somasundaram SD, Jakobsson A, Rowe MD, Smith JAS, Butt NR and Althoefer K (2008). Robust Detection of Stochastic Nuclear Quadrupole Resonance Signals. Institute of Electrical and Electronics Engineers (Ieee) Ieee Transactions On Signal Processing vol. 56 (9), 4221-4229.  
    01-09-2008
  • Rahideh A and Shaheed MH (2008). Neural network-based modelling of a two-degrees-of-freedom twin rotor multiple input, multiple output system using conjugate gradient learning algorithms. P I Mech Eng G-J Aer vol. 222 (G6), 757-771.  
    01-09-2008
  • Papadopoulos IC, Thomas AG and Busfield JJC (2008). Rate transitions in the fatigue crack growth of elastomers. Journal of Applied Polymer Science vol. 109 (3), 1900-1910.  
    05-08-2008
  • Wen PH and Aliabadi MH (2008). An improved meshless collocation method for elastostatic and elastodynamic problems. Communications in Numerical Methods in Engineering vol. 24 (8), 635-651.  
    01-08-2008
  • Fukahori Y, Liang H and Busfield JJC (2008). Criteria for crack initiation during rubber abrasion. Wear vol. 265 (3-4), 387-395.  
    31-07-2008
  • Fang QH, Liu Y, Huang BY, Liu YW and Wen PH (2008). Contribution to critical shear stress of nanocomposites produced by interaction of screw dislocation with nanoscale inclusion. Materials Letters vol. 62 (20), 3521-3523.  
    31-07-2008
  • Fang QH, Liu YW and Wen PH (2008). Screw dislocations in a three-phase composite cylinder model with interface stress. Journal of Applied Mechanics, Transactions Asme vol. 75 (4), 0410191-0410198.  
    01-07-2008
  • Motallebi F (2008). Introduction to the Queen Mary College 100th anniversary of teaching aeronautics special issue of The Aeronautical Journal. Aeronaut J vol. 112 (1133), IV-IV.  
    01-07-2008
  • Liu T, Deng ZC and Lu TJ (2008). Analytical modeling and finite element simulation of the plastic collapse of sandwich beams with pin-reinforced foam cores. Elsevier International Journal of Solids and Structures vol. 45 (18-19), 5127-5151.  
    06-06-2008
  • Althoefer K, Lara B, Zweiri YH and Seneviratne LD (2008). Automated failure classification for assembly with self-tapping threaded fastenings using artificial neural networks. Sage Publications Proceedings of The Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science vol. 222 (6), 1081-1095.  
    01-06-2008
  • Dowling AP, Afsar M, Karabasov S and Hynes TP (2008). Reduced‐order models for jet noise. Acoustical Society of America (Asa) The Journal of The Acoustical Society of America vol. 123 (5), 3021-3021.  
    01-05-2008
  • Punekar J and Avital E (2008). Nonlinear Propagation of Screech Noise. Acoustical Society of America (Asa) The Journal of The Acoustical Society of America vol. 123 (5), 3249-3249.  
    01-05-2008
  • Vepa R (2008). Aeroelastic analysis of wing structures using equivalent plate models. Aiaa Journal vol. 46 (5), 1216-1225.  
    01-05-2008
  • Al-ja'afreh T, Zweiri Y, Seneviratne L and Althoefer K (2008). A new soft-tissue indentation model for estimating circular indenter ‘force—displacement’ characteristics. Sage Publications Proceedings of The Institution of Mechanical Engineers Part H Journal of Engineering in Medicine vol. 222 (5), 805-815.  
    01-05-2008
  • Hino R, Sasaki A, Yoshida F and Toropov VV (2008). A new algorithm for reduction of number of press-forming stages in forging processes using numerical optimization and FE simulation. International Journal of Mechanical Sciences vol. 50 (5), 974-983.  
    01-05-2008
  • Puangmali P, Althoefer K, Seneviratne LD, Murphy D and Dasgupta P (2008). State-of-the-Art in Force and Tactile Sensing for Minimally Invasive Surgery. Institute of Electrical and Electronics Engineers (Ieee) Ieee Sensors Journal vol. 8 (4), 371-381.  
    01-04-2008
  • Song Z-B, Zweiri YH, Seneviratne LD and Althoefer K (2008). Non-linear observer for slip estimation of tracked vehicles. Sage Publications Proceedings of The Institution of Mechanical Engineers Part D Journal of Automobile Engineering vol. 222 (4), 515-533.  
    01-04-2008
  • Wang W and Wen PH (2008). Interaction between micro-particles in Oseen flows by the method of fundamental solutions. Eng Anal Bound Elem vol. 32 (4), 318-327.  
    01-04-2008
  • Fang QH, Liu YW and Wen PH (2008). A piezoelectric screw dislocation interacting with an elliptical inclusion containing electrically conductive interfacial rigid lines. International Journal of Mechanical Sciences vol. 50 (4), 683-693.  
    01-04-2008
  • Suponitsky V, Avital E and Gaster M (2008). Hydrodynamics and sound generation of low speed planar jet. Journal of Fluids Engineering, Transactions of The Asme vol. 130 (3), 0314011-0314018.  
    01-03-2008
  • Rahideh A, Shaheed MH and Huijberts HJC (2008). Dynamic modelling of a TRMS using analytical and empirical approaches. Control Engineering Practice vol. 16 (3), 241-259.  
    01-03-2008
  • Jha V, Hon AA, Thomas AG and Busfield JJC (2008). Modeling of the effect of rigid fillers on the stiffness of rubbers. Journal of Applied Polymer Science vol. 107 (4), 2572-2577.  
    15-02-2008
  • Wen PH (2008). The fundamental solution of Mindlin plates resting on an elastic foundation in the Laplace domain and its applications. International Journal of Solids and Structures vol. 45 (3-4), 1032-1050.  
    01-02-2008
  • Zbyszewski D, Liu H, Puangmali P, Althoefer K, Nunes CS, Seneviratne LD, Challacombe B, Murphy D and Dasgupta P (2008). Wheel/Tissue Force Interaction: A New Concept for Soft Tissue Diagnosis during MIS. Institute of Electrical and Electronics Engineers (Ieee) Annual International Conference of The Ieee Engineering in Medicine and Biology Society (Embc) vol. 2008, 5556-5559.  
    01-01-2008
  • Forsythe N and Mueller JD (2008). Validation of a fluid-structure interaction model for a bileaflet mechanical heart valve. Int J Comput Fluid D vol. 22 (8), 541-553.  
    01-01-2008
  • Karabasov SA, Afsar MZ, Hynes TP, Dowling AP, McMullan WA, Pokora CD, Page GJ and McGuirk JJ (2008). Using large eddy simulation within an acoustic analogy approach for jet noise modelling. 14th Aiaa/Ceas Aeroacoustics Conference (29th Aiaa Aeroacoustics Conference) 
    01-01-2008
  • Vahed SM, Song X, Dai JS, Lam HK, Seneviratne LD and Althoefer K (2008). Soil Estimation Based on Dissipation Energy during Autonomous Excavation. Elsevier Ifac-Papersonline vol. 41 (2), 13821-13826.  
    01-01-2008
  • Chhaniyara S, Bunnun P, Seneviratne LD and Althoefer K (2008). Optical Flow Algorithm for Velocity Estimation of Ground Vehicles: A Feasibility Study. De Gruyter International Journal On Smart Sensing and Intelligent Systems vol. 1 (1), 245-267.  
    01-01-2008
  • Song ZB, Zweiri YH, Seneviratne LD and Althoefer K (2008). Non-linear observer for slip estimation of tracked vehicles. Proceedings of The Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering vol. 222 (4), 515-533.  
    01-01-2008
  • Ciselli P, Lu L, Busfield JJC and Peijs T (2008). Multifunctional elastomer nanocomposites based on EPDM and carbon nanotubes. Materials Research Society Symposium Proceedings vol. 1143, 31-42.  
    01-01-2008
  • Ciselli P, Lu L, Busfield JJ and Peijs T (2008). Multifunctional Elastomer Nanocomposites based on EPDM and Carbon Nanotubes. Springer Nature Mrs Advances vol. 1143 
    01-01-2008
  • ja'afreh TMA, Zweiri YH, Seneviratne LD and Althoefer K (2008). Modelling soft tissue-mechatronic tool interactions during indentation. Inderscience Publishers International Journal of Modelling Identification and Control vol. 4 (4) 
    01-01-2008
  • Cohen GS and Motallebi F (2008). Influence of the height of the vortex generators in the control of shock-induced separation of the boundary layers. Aeronautical Journal vol. 112 (1133), 415-420.  
    01-01-2008
  • Wen PH, Aliabadi MH, Sladek J and Sladek V (2008). Displacement discontinuity method for cracked orthotropic strip: Dynamic. Wave Motion vol. 45 (3), 293-308.  
    01-01-2008
  • Avital EJ, Alonso M and Supontisky V (2008). Computational aeroacoustics: The low speed jet. Aeronautical Journal vol. 112 (1133), 405-414.  
    01-01-2008